Instrukcja obsługi Hama 00062743

Hama router 00062743

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hama 00062743 (14 stron) w kategorii router. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/14
2
Contents:
1. Connecting the Wireless LAN Router .........................................................................................................................Page 03
2. Confi guring the operating system and computer......................................................................................................Page 04
3. Confi guring the Wireless LAN Router .........................................................................................................................Page 05
3.1 Confi guring the Internet Connection using the Wizard............................................................................................Page 05
3.2 Confi guring the Wireless LAN ......................................................................................................................................Page 06
Basic Settings for Wireless Networks ...............................................................................................................Page 063.2.1
3.2.1.1 Operation as an Access Point (AP) ........................................................................................................Page 07
3.2.1.2 Operation as an AP Bridge Point to Point .............................................................................................Page 07
3.2.1.3 Operation as an AP Bridge Point to Multi-Point...................................................................................Page 08
3.2.1.4 Operation as an AP Bridge WDS ............................................................................................................Page 08
Setting the Encryption for AP ..............................................................................................................................Page 093.2.2
3.2.2.1 WEP Encryption .........................................................................................................................................Page 09
3.2.2.2 WPA/WPA2 encryption.............................................................................................................................Page 10
3.2.3 Setting the Encryption for AP Bridge-Point to Point, Point to Multi-Point and WDS .................................. Page 11
3.2.3.1 WEP Encryption .........................................................................................................................................Page 11
3.2.3.2 WPA/WPA2 Encryption.............................................................................................................................Page 12
3.2.4 WPS Automatic confi guration .............................................................................................................................Page 12
3.3 Changing the Log-in Data .............................................................................................................................................. Page 13
3.4 LAN Settings ....................................................................................................................................................................Page 13
4. Tools............... ...................................................................................................................................................................Page 14
4.1 Con guration Tools ........................................................................................................................................................Page 14
4.2 Firmware Update ............................................................................................................................................................Page 14
4.3 Re-starting the Router ...................................................................................................................................................Page 14
5. Status Information ..........................................................................................................................................................Page 14
6. Support and Contact Information ................................................................................................................................Page 15
gOperating Instruction
3
Packet contents:
1x Hama Wireless LAN Router 300 Mbps
1x 12V power supply
1x printed operating instructions
1x con guration cable
Remark concerning the positioning:
The connection quality depends strongly on the place or surroundings where you put up the WLAN device. Please ensure that the
device or its antennae are neither covered nor built in. We advise you against putting it up near metallic objects or other electric or
radiant devices. In case of reception uctuations or connection interruptions we recommend you to move interference sources such
as DECT telephones, mobile phones, Bluetooth devices or other WLAN networks out of the way. If this is not possible, it may also be
helpful to change the cable.
System requirements:
• Operating system with TCP/IP protocol installed
• Java-capable web browser such as Mozilla Firefox or Microsoft Internet Explorer
Safety instructions:
Do not use the device in moist or extremely dusty areas, on radiators or in the vicinity of heat sources. This device is not designed for
use outdoors. Protect the device from pressure and impact. The device may not be opened or moved during operation. Do not operate
the device without a screwed-on antenna.
Caution! Use the router with the enclosed power supply unit only. Using other power supply units can cause irreparable damage
to the product.
Note! The “Connect as required” setting is recommended for volume or timed rates, so that the internet connection is discon-
nected automatically after the period set in the „Idle time” option. Connection costs may be high if permanently con-
nected. Please also note that closing the browser does not automatically disconnect from the internet. Many programs
send queries to the internet or receive data from it without this being clearly visible. For the router, these queries are just
as valid as opening a browser, for example. If you want to ensure that there is no active connection to the internet, you
should switch off the device or disconnect it from the modem.
1. Connecting the Wireless LAN Router
1. Connect the computers and other network devices such as hubs/switches to sockets 1-4. Use a crossover or CAT5 patch cable
(max. 100m). The integrated switch automatically identifi es the connection speed of 10 or 100Mbps, half/full duplex transfer
mode and the type of cable used.
2. Connect the Ethernet port of your modem to the WAN connection on the router. A 1:1 or crossover cable is required depending
on the modem. In most cases, the existing connection cable can be used.
3. Plug the power unit supplied into an empty socket and connect it to the router. Caution: Unsuitable power supply units can cause
damage!
Checking Installation
There are various status indicating LEDs on the top of the device:
LED Condition Status
Power Illuminated Power unit is connected and supplying electricity
Off No power unit connected, device not being supplied with electricity
WLAN Flashing Wireless LAN is activated / data is being sent
Off Wireless LAN is deactivated
WAN Illuminated The WAN port has generated a correct network connection
Flashing Data transfer via WAN port
Off No connection
LAN1-4 Illuminated The corresponding LAN port has generated a correct network connection
Flashing Data transfer via respective LAN port
Off No connection
4
2. Confi guring the operating system and computer
The TCP/IP protocol must be installed on all PCs that will be using the Internet. By default, the IP address 192.168.2.1 and an activated
DHCP server are confi gured for the router. This means that the connected PCs are automatically given appropriate addresses and
other settings. We recommend using these settings.
Proceed as follows to check the settings on your PC:
Start -> Settings -> Control panel -> Network connections
Select the connection (network adapter) via which your PC is connected
to the router, e.g. “LAN connection”. When you right-click the correspon-
ding connection, a menu is displayed in which you select Properties.
Select the entry in the list and click .Internet Protocol (TCP/IP) Properties
Select and Optain an IP address automatically Optain DNS server
address automatically! Con rm by clicking , and again in the OK
subsequent window.
Your PC is now con gured such that the router assigns the IP address
automatically. You can then con gure the router using the web browser.
The browser must be Java-capable and the Java function must be activa-
ted (e.g. Internet Explorer 6.0 or better, or Mozilla Firefox).


Specyfikacje produktu

Marka: Hama
Kategoria: router
Model: 00062743
Kolor produktu: Black, White
Maksymalna szybkość przesyłania danych: 300 Gbit/s
Zakres częstotliwości: 2.4 GHz
Ilość portów Ethernet LAN (RJ-45): 5
Napięcie: 230 V
Standardowe rozwiązania komunikacyjne: WiFi
Dołączone oprogramowanie: Panda Antivirus + Firewall
Serwer DHCP: Tak
Możłiwość podłączenia ISDN: Nie
Szybkość transmisji danych: 300/54/11 Mbps

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hama 00062743, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router Hama

Instrukcje router

Najnowsze instrukcje dla router

Netgear

Netgear LB2120 4G LTE Instrukcja

15 Października 2024
Linksys

Linksys WRT3200ACM Instrukcja

15 Października 2024
D-Link

D-Link DAP-1360 Instrukcja

15 Października 2024
TP-Link

TP-Link Archer AXE75 Instrukcja

14 Października 2024
Linksys

Linksys EA8500 Instrukcja

13 Października 2024
Totolink

Totolink ND300 Instrukcja

12 Października 2024
ZyXEL

ZyXEL LTE 7460 Instrukcja

10 Października 2024
Netgear

Netgear Nighthawk R7200 Instrukcja

10 Października 2024
Netgear

Netgear FR114P Instrukcja

10 Października 2024
Asus

Asus RT-BE86U Instrukcja

9 Października 2024