Instrukcja obsługi Hager TCC510S

Hager detektor TCC510S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hager TCC510S (19 stron) w kategorii detektor. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/19

TCC510S 1 6T 8069-02b

Tebis application software

STCC510S Presence detector 360°

Product reference Product designation TP device

RF devices

TCC510S Presence detector

Load connected

Visualisation system

Output module KNX

Input modules KNX

Remote controls

TCC510S

Presence / absence management

Presence detection

Brightness management

Presence / absence management

Master / Slave mode

Lighting control

Priority

Scene

SceneAutomatic and semi-auto-

matic mode

Override

Linking

Remote control

TCC510S 2 6T 8069-02b

1. Presentation...................................................................................................................................................................... 3

1.1 Function Description.................................................................................................................................................... 3

1.2 General outline ..................................................................................... ....................... ................................................ 4

1.3 Description of the product............................................................................................................................................ 4

2. Configuration and General parameters............................................................................................................................. 5

2.1 General parameters..................................................................................................................................................... 5

2.1.1 Objects List ........................................................................................................................................................... 5

2.1.2 Setting parameters................................................................................................................................................ 5

2.2 Setup IR remote control............................................................................................................................................... 6

3. Configuration and parameters of the lighting channel ...................................................................................................... 7

3.1 Objects List.................................................................................................................................................................. 7

3.2 Setting parameters ...................................................................................................................................................... 7

3.2.1 Value of the brightness threshold.......................................................................................................................... 8

3.2.2 Time delay............................................................................................................................................................. 8

3.2.3 Override operation ................................................................................................................................................ 8

3.2.4 Light cell use ....................................................................................................................................................... 10

3.2.5 Functions of the lighting channel......................................................................................................................... 10

3.2.6 Status at bus return............................................................................................................................................. 15

3.2.7 Emission after initialization.................................................................................................................................. 16

4. Physical addressing ........................................................................................................................................................ 17

5. Main characteristics ........................................................................................................................................................ 18

6. Appendix......................................................................................................................................................................... 18

Summary

TCC510S 3 6T 8069-02b

The software application is used to configure the presence detector.

The TCC510S is a presence detector which detects the slightest movement (e.g. that of a person working in an office). A

pyroelectric sensor located under the detection lens is used for detection. The presence sensor constantly measures the

brightness in the room and compares it to the brightness level setting.

The brightness level can be set either with an installer remote control or with the ETS or a rotating potentiometer on the device.

Different reactions may occur on the KNX bus according to the setting, such as a reaction to the measured luminosity and to

presence.

The main functions are the following:

■Output control by the KNX bus (lighting channel)

The output can be controlled in different ways.

The possible functions are:

- Timer activation,

- Brightness value (%) presence,

- Brightness value (%) presence and absence,

- Activation of the presence scene,

- Activation of the presence and absence scene,

- Priority.

■Assessment of the brightness

The ambient brightness level value can be set by ETS, the installer remote control or directly on the presence detector using a

rotating potentiometer. This threshold value will be used to define the ambient brightness (darkness) based on which a bus

telegram will be sent via the Lighting channel object in case of movement.

■Time delay

The time delay is started when switching from presence to absence (no presence) taking into account the ambient brightness.

Once the time delay has expired, the movement detector switches to absent mode (no presence). If the brightness level is

sufficient, the time delay may be reduced. According to the function selected, a telegram is sent on the bus in case of Presence

or of Presence and Absence. The time delay can be set by ETS, an installer remote control or via a setting potentiometer directly

on the product.

■Remote control of the Lighting channel

The remote control is used to trigger the presence detector via the KNX bus or a user remote control (e.g. start it).

The detector can be used in automatic or semi-automatic mode. When semi-automatic mode is selected, the remote control is

used for activation (presence), whereas the detector controls deactivation (e.g. switches OFF).

Automatic mode is used to obtain an automatic action according to presence and the brightness conditions (e.g. ON or OFF).

Here, the remote control is used to switch from presence mode (e.g. switch on the lights) to absence mode (e.g. switch off the

lights).

■Infrared remote control using the user remote control

The occupancy sensor embeds an infra red receiver. The infra red remote control offers the same functionalities as the KNX push

button input (Remote control object).

■Infrared settings adjustment using the installer remote control

Some settings (Remote control, Control type: automatic/semi-automatic, ambient brightness threshold value, Lighting time delay)

are possible with the installer remote control. The possibility of using the remote control to adjust settings can be defined or

locked by the ETS.

1. Presentation

1.1 Function Description

Specyfikacje produktu

Marka:	Hager
Kategoria:	detektor
Model:	TCC510S
Kolor produktu:	Biały
Materiał obudowy:	Tworzywo sztuczne ABS
Zakres temperatur (eksploatacja):	-10 - 45 °C
Liczba dołączonych produktów:	1 szt.