Instrukcja obsługi GVM -PRO-SD300C

GVM Ulga -PRO-SD300C

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GVM -PRO-SD300C (20 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
GVM-PRO-SD300C
V0
CONTENTS
Important Safety Instructions --------------------------------------------- Page 1~2
Warning ----------------------------------------------------------------------- Page 2
Product Introduction ---------------------------------------------------------- Page 3
Disclaimers -------------------------------------------------------------------- Page 3
Product Parameter ------------------------------------------------------------ Page 4
Precautions -------------------------------------------------------------------- Page 4
Product Structure Diagram --------------------------------------------------- Page 5
Installation Method -------------------------------------------------------- Page 6~8
Description Of Product Control Keys ----------------------------------------- Page 9
Function Introduction & Instructions For Use -------------------------- Page 10~12
APP Control -------------------------------------------------------------- Page 13~14
Use And Preservation -------------------------------------------------------- Page 14
Quick Troubleshooting ------------------------------------------------------ Page 15
Packing List ------------------------------------------------------------------ Page 15
Product Warranty -------------------------------------------------------- Page 16~17
1
IMPORTANT SAFETY INSTRUCTIONS
First and foremost: this product is professional lighting and staging equipment and
should be used by a professional lighting technician or under the guidance of a
professional. When using this product, you must always follow the cautions below:
1．Read the product manual carefully before use.
2．This product is only suitable to use in a temperature range of -20℃ to 45℃.
3．Do not place the equipment near flammable and volatile solvents such as alcohol and
gasoline.
4．Before storing the device, make sure it has cooled down completely. When being stored,
unplug the power cord from the device. The equipment should be stored in its carrying
case or a well-ventilated and dry place.
5．This lighting fixture is not for general illumination and should not be used as such.
Individuals with eye injuries or sensitivity should avoid using this lighting fixture.
6．This is a professional light and children are prohibited from using it. Parents or guardians
must closely supervise children when they are near the equipment to prevent personal
injury caused by colliding with or misusing the equipment.
7．Before using the equipment, please remove the protective cover.
8．When the lighting fixture is on, it is forbidden to stare directly at the light source under any
circumstances. High-intensity lighting should only be used under the guidance of a
professional lighting technician. Avoid staying in a high-intensity light environment for a
long time. If feeling any discomfort, please immediately turn off the lighting fixture, and
seek medical attention.
9．When the lighting fixture is on, use it carefully and avoid contacting high-temperature
components such as LED light sources to prevent being burnt.
10.Do not use damaged equipment or accessories. Wait for a professional repairman to
inspect and repair it before it is confirmed that the equipment can function normally.
11.If the light source is damaged or deformed due to heat, please stop using it and contact the
manufacturer, service agents, or qualified repairman promptly to replace the light source
to avoid accidents.
12.If the product is cracked due to falling, squeezing, or strong impact during use, please stop
use it to avoid being electrically shocked by touching internal electronic components.
13.Do not disassemble the product by yourself. If the product malfunctions, it must be
checked and repaired by the manufacturer or authorized repair personnel.
14.Before cleaning and maintenance, be sure to unplug the power To unplug never pull supply.
on the cable but always pull the plug itself. This device shall only operate with earthed
power outlets or emergency power generators.
15.When cleaning the device, do not wipe it with a wet cloth. Use a dry and soft cloth to wipe
off the dirt.
16.If an extension cord is required, it needs to have the necessary capacity to power the
respective unit. Using an extension cord with a lower current capacity than the devices
need may cause overheating.

Specyfikacje produktu

Marka: GVM
Kategoria: Ulga
Model: -PRO-SD300C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z GVM -PRO-SD300C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga GVM

GVM

GVM SD300D Instrukcja

5 Października 2024
GVM

GVM SD300S Instrukcja

5 Października 2024
GVM

GVM B200C Instrukcja

5 Października 2024
GVM

GVM PR150D Instrukcja

5 Października 2024
GVM

GVM -PRO-SD300C Instrukcja

4 Października 2024
GVM

GVM 12D Instrukcja

29 Września 2024
GVM

GVM PRO-BD45R Instrukcja

29 Września 2024
GVM

GVM PRO-BD25R Instrukcja

29 Września 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Goobay

Goobay 30780 Instrukcja

15 Października 2024
QTX

QTX DM-X12 Instrukcja

15 Października 2024
Livarno

Livarno IAN 94799 Instrukcja

15 Października 2024
Astro

Astro Denia Instrukcja

13 Października 2024
AFX

AFX Grace GRCP07CBBK Instrukcja

12 Października 2024
AFX

AFX Point PNTP0107L30D1BK Instrukcja

12 Października 2024
Neewer

Neewer TL97C Instrukcja

9 Października 2024
Neewer

Neewer SRP18C Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024