Instrukcja obsługi Grace Design FELIX 2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Grace Design FELIX 2 (19 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/19
1
2 Channel Instrument Preamplifier / EQ / DI
Owners Manual Rev. A
Grace Design, 4689 Ute Highway, Lyons, CO 80503
303.823.8100 / info@gracedesign.com
www.gracedesign.com
2
1 Welcome
If you’re reading this, you are probably a working musician or
audio professional of some kind. You’ve spent years honing
your craft with long, lonely hours spent strumming, picking,
tweaking, bowing, thumping and plucking. Maybe you tour
the world or just play the local pub. You’ve gotten up on stage
tired, given more than you thought you had and driven home
barely awake but your soul ablaze and still singing. You have
friends and bandmates out there that you rely on like family.
Some of your friends, maybe the very best ones, are made of
wood, steel, glue, bone and strings. And now you can welcome
Felix 2 to the latter category.
Regardless of where and how and why you play, from here on
out when you look down at that stage oor, it will be down
there shining back up at you, making you sound better and
your job easier.
While this is not the most complicated piece of gear you’ve
ever operated, it does come with a great deal of exibility and
setup options, which means we highly recommend you have
a good look at this owner’s manual to familiarize yourself with
the ner points. Once you overcome the learning curve (easy,
we promise), you’ll nd Felix 2 to be intuitive, powerful and
really quite user friendly.
Most of all, we made this preamp so you can make great music.
So read this manual and then get back to work!
2 Safety Information
Indoor use only
Ordinary Protection: This equipment should not be
exposed to dripping or splashing.
Avoid placing objects lled with liquids, such as vases or
glasses, on this equipment.
Class II Equipment (double insulated type)
Electrical rating: 100-240V~ 50-60Hz 10W
Mains supply voltage uctuations are not to exceed ±10%
of the nominal supply voltage.
Pollution Degree 2
Installation (Over voltage) Category II for transient over
voltages.
Maximum Relative Humidity: <80%
Operation temperature range: 10 °C to 40 °C
Storage and transportation temperature range –40 °C to 70
°C
Maximum altitude: 3000m (9843 ft)
Equipment suitable for continuous operation
Weight: 3.2lbs
TABLE OF CONTENTS
1 Welcome 2
2 Safety Information 2
3 Safety Marking Symbols 3
4 Features 3
5 Top Panel Controls and Features 4
6 Back Panel Controls and Features 5
7 Side Panel Controls and Features 5
8 Connections 5
8.1 1/4” Instrument inputs, CH1 & CH2 5
8.2 CH1 XLR mic input 6
8.3 Insert send and return 6
8.4 Insert send 6
8.5 Amp Out 6
8.6 Tuner Output 6
8.7 DI Outputs, CH1 & CH2 6
8.8 Headphone Output 7
8.9 100-240VAC Power Input 7
9 Operation 7
9.1 Where to put your preamp? 7
9.2 Using the XLR mic input CH1 7
9.3 Instrument / line inputs 7
9.4 Filtering and EQ 8
9.5 Output controls and settings 9
9.6 Footswitch Controls 10
9.7 Side Panel Controls 10
10 Adjusting Internal Jumpers 11
10.1 Internal Jumper Locations 12
11 FX Insert Connections 14
12 Connection Diagram 15
13 Block Diagram 16
14 Specications 17
15 Cleaning and Maintenance 18
16 Warranty 18
17 Manual Revisions 19
3
3 Safety Marking Symbols
Caution: Read Accompanying Documents
This symbol, located on the equipment and in
this manual, refers to important instructions.
Read this manual thoroughly before operating
this equipment.
Warning: Electrical Shock Hazard
This symbol, located on the equipment and in
this manual, indicates the potential for electrical
shock hazard.
Service Information
The Grace Design Felix 2 contains no user serviceable
components. Contact Grace Design for repair and upgrade
information. In the event that your Grace Design Felix 2
needs to be returned to the factory, contact us for a return
authorization number.
4 Features
Open, musical and detailed instrument and mic
preamplication for discerning artists and engineers like
yourself
2 channel audio path with MIX output option
Stereo or Dual Mono FX loops via TRS send and TRS return
Studio quality microphone preamplier built-in with no
electrolytic capacitors in the signal path
Ultra precision 0.5% thin lm resistors used in the signal
path
Careful power supply design and grounding for
professional level headroom and line driving ability
Dual ground isolated DI outputs with high quality, low
distortion, fully shielded transformers
Super rugged 1/4 connectors with heavy duty metal
bushings
Powerful, independent EQ on both channels – hi and low
shelving and full parametric midrange
LOW and HIGH shelving controls each have 2 range (corner
frequency) settings via internal jumpers
Mid frequency control has two ranges 70-880Hz / 670 -
8kHz
20Hz-1kHz sweepable HPF on both channels, can also be
set as high Q notch lter
A / B footswitch for multiple instrument congurations or
soloing dierent pickups
Mute/ tune footswitch mutes all outputs except dedicated
tuner out and headphone output
Boost footswitch for variable 10dB level boost (global)
DI outputs sources are congurable - CH1 (mix or CH1) CH2
(mix or CH2)
Dedicated level controlled stereo stage amp output
(congurable as CH1 or MIX and CH2)
Dedicated tuner out, remains active when unit is muted
1/8” stereo headphone jack, remains active when unit is
muted
Side panel switches for 48V, phase reverse, mid Hz range
select, HPF/notch select, 12V and A/B mode select
12V mic input power available on CH1 and CH2 1/4” inputs
Phase reverse switch for each channel
Variable phase control option on CH2
3 input impedance settings on each channel – CH1 10K,
1MEG, 10MEG / CH2 332K, 1MEG, 20MEG accommodating
a wide range of pickup types
Mic stand ange mount screw holes for mounting Felix 2
on a mic stand - Atlas Sound AD-11B and 6-32 X 3/8 pan
head phillips stainless steel screws not included
Universal 100-240 AC power supply with standard IEC
cable – works anywhere in the world!
Full 5 year transferable warranty / built for a long, happy
life on the road
Designed and built by us in Lyons, CO, USA


Specyfikacje produktu

Marka: Grace Design
Kategoria: odbiornik
Model: FELIX 2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Grace Design FELIX 2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Grace Design

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024