Instrukcja obsługi Grace Design ALiX


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Grace Design ALiX (16 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
Instrument Preamplifier / EQ / DI
Owners Manual Rev. D
Grace Design, 4689 Ute Highway, Lyons, CO 80503
303.823.8100 / info@gracedesign.com
www.gracedesign.com
2
1 Welcome
Like its big brother FELiX, the ALiX you hold in your hand is
designed to make you sound better, play better and have more
fun in the process. From Banjo, bass to bouzouki, if it has strings
and a pickup, ALiX will make its tone shine through.
While ALiX is not the most complicated piece of gear you’ve
ever operated, it does aord a good bit of exibility and setup
options, which means we highly recommend you have a good
look at this owner’s manual to familiarize yourself with its
ner points. Once you overcome the learning curve (easy, we
promise), you’ll nd AliX to be intuitive and user friendly.
It is our sincere hope that our gear helps you do better work.
You are why we do this. Please drop us a line or a message and
let us know what you think.
And by all means if you ever have any questions about using
your ALiX or anything else we make, call us at 1-303-823-8100,
9-5 MST.
Have fun!
- The Grace Design Team
2 Safety Information
Indoor use only
Ordinary Protection: This equipment should not be
exposed to dripping or splashing.
Avoid placing objects lled with liquids, such as vases or
glasses, on this equipment.
Class I Equipment (grounded type)
Electrical rating: 100-240V~ 50-60Hz 10W
Mains supply voltage uctuations are not to exceed ±10%
of the nominal supply voltage.
Pollution Degree 2
Installation (Over voltage) Category II for transient
overvoltages.
Maximum Relative Humidity: <80%
Operation temperature range: 10 °C to 40 °C
Storage and transportation temperature
range –40 °C to 70 °C
Maximum altitude: 3000m (9843 ft)
Equipment suitable for continuous operation
Weight: 2.2lbs
TABLE OF CONTENTS
1 Welcome 2
2 Safety Information 2
3 Safety Marking Symbols 3
4 Features 3
5 Top Panel Controls and Features 4
6 Back Panel Controls and Features 5
7 Side Panel Controls and Features 5
8 Connecting ALiX to Stu 6
8.1 1/4” Instrument input 6
8.2 Insert (FX LOOP) 6
8.3 Amp Out 6
8.4 Tuner Output 6
8.5 DI Output 6
8.6 100-240VAC Power Input 6
8.7 9V @ 500mA DC POWER OUTPUT 6
9 Operation 6
9.1 Where to put ALiX? 6
9.2 Instrument / line input 6
9.3 Filtering and EQ 7
9.4 Output controls 8
9.5 Footswitch Controls 8
9.6 Side Panel Controls 8
10 Diagrams 9
10.1 Insert cable Wiring 9
10.2 Block Diagram 10
10.3 Connection Diagram 11
10.4 AdJusting Internal Jumpers 12
10.5 Internal Jumper Locations 13
11 Specications 14
12 Cleaning and Maintenance 15
13 Warranty 15
14 Manual Revisions 16
3
3 Safety Marking Symbols
Caution: Read Accompanying Documents
This symbol, located on the equipment and in
this manual, refers to important instructions.
Read this manual thoroughly before operating
this equipment.
Warning: Electrical Shock Hazard
This symbol, located on the equipment and in
this manual, indicates the potential for electrical
shock hazard.
Service Information
The Grace Design ALiX contains no user serviceable
components. Contact Grace Design for repair and upgrade
information. In the event that your Grace Design Felix needs to
be returned to the factory, contact us for a return authorization
number.
4 Features
Open, musical and detailed instrument preamplication for
discerning artists and engineers like yourself
Ultra precision 0.5% thin lm resistors used in the signal
path
Careful power supply design and grounding for an ultra-
quiet signal path and professional level headroom and line
driving ability
Fully ground isolated DI output with high quality, low
distortion, fully shielded transformer
Super rugged 1/4” connectors with heavy duty metal
bushings
Powerful, independent EQ – hi and low shelving and full
parametric midrange
Mid frequency control has two ranges 70-880Hz / 670 -
8kHz
20Hz-1kHz sweepable HPF on both channels, can also be
set as notch lter
Mute/ tune footswitch mutes all outputs except dedicated
tuner out and headphone output
12V mic input power
9VDC @ 500mA (2.1mm BOSS™ standard center negative)
power output for powering other pedals from the ALiX
Boost footswitch for variable 10dB level boost
Dedicated level controlled stage amp output
Dedicated tuner out, remains active when unit is muted
Side panel switches for mid Hz range select, HPF/notch
select, 12V microphone power enable
Phase reverse switch
3 input impedance settings – 330KΩ, 1MEGΩ, 10MEGΩ
accommodating a wide range of pickup types
TRS eects insert jack
Universal 100-240 AC power supply with standard IEC
cable – no wall wart - take ALiX anywhere in the world!
Full 5 year transferable warranty / built for a long, happy
life on the road
Designed and built by us in Lyons, CO, USA


Specyfikacje produktu

Marka: Grace Design
Kategoria: odbiornik
Model: ALiX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Grace Design ALiX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Grace Design

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024