Instrukcja obsługi Glyph GT062E

Glyph zewnętrzny dysk twardy GT062E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Glyph GT062E (17 stron) w kategorii zewnętrzny dysk twardy. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/17
1
GT 062E™ Manual
Tabletop FireWire 800, USB 2.0 and eSATA enclosure
with RAID 1, RAID 0 and Spanning modes
610030-1.08 GT 062E Manual.pdf
August 23, 2011
Proprietary Notice and Disclaimer
Unless noted otherwise, this document and the information herein disclosed are proprietary to Glyph Technologies, 3736 Kellogg
Road, Cortland NY 13045 (“GLYPH”). Any person or entity to whom this document is furnished or having possession thereof, by
acceptance, assumes custody thereof and agrees that the document is given in condence and will not be copied or reproduced
in whole or in part, nor used or revealed to any person in any manner except to meet the purposes for which it was delivered.
Additional rights and obligations regarding this document and its contents may be dened by a separate written agreement with
GLYPH, and if so, such separate written agreement shall be controlling.
The information in this document is subject to change without notice, and should not be construed as a commitment by GLYPH.
Although GLYPH will make every eort to inform users of substantive errors, GLYPH disclaims all liability for any loss or damage
resulting from the use of this manual or any software described herein, including without limitation contingent, special, or inci-
dental liability.
© 2002-2008 Glyph Technologies. All rights reserved. Specications are subject to change without notice. Glyph and the Glyph
logo are registered trademarks of Glyph Technologies. All other brands and product names mentioned are trademarks of their
respective holders.
2
Contacting Glyph
Please use the following contact information to contact Glyph and its distributors.
Glyph USA oers phone support Monday through Friday, 8:00 am to 5:00 PM Eastern Time.
Note: DO NOT ship any return goods to the mailing addresses below unless you have a valid RMA number.
All goods will be refused delivery unless a valid RMA number is displayed on the outside of the package.
United States of America
Glyph Technologies
3736 Kellogg Rd.
Cortland, NY 13045
USA
Phone: +1 607-275-0345
Fax: +1 607-275-9464
www.glyphtech.com
Sales Contact
sales@glyphtech.com
Technical Support:
tech@glyphtech.com
Unpacking Your GT 062E
Your Glyph GT 062E and accessories are packaged in a sturdy shipping container. Please inspect the con-
tainer for evidence of shipping damage and mishandling. If the container is damaged, le a report with the
carrier or dealer immediately. Do not attempt to unpack and operate your GT 062E until the carrier or dealer
conrms the damage. If the container is in good condition, proceed with unpacking the GT 062E. Verify
that all of the items described in the next section are present and in good condition. If any of the items you
expect to nd in your container is missing or damaged, contact the dealer before proceeding any further.
In any case, do keep the shipping container and all packing materials in a safe place.
The GT 062E package includes:
GT 062E External Hard Drive
Glyph Manager software installer CD
9-Pin FireWire 800 Cable
USB 2.0 Cable (A to Mini-B)
IEC Power Cable
3
About the GT 062E and Drive Modes
The GT 062E enclosure contains two hard disk drives, which function as one single volume. Through the use
of the Glyph Manager software utility, it supports three drive modes: RAID 1 (mirroring), RAID 0 (striping),
and Spanning. Each drive mode has its own advantages, depending upon the application.
RAID 1 (mirroring) oers data redundancy and real-time backup by writing the same data to the
two hard drives at the same time. Should a drive failure happen, data is still available on the remain-
ing drive. In RAID 1 mode, the two drives are seen by the computer as one volume, but with half the
capacity. For example, a 1TB GT 062E will be seen as a 500GB drive. Reading and writing occurs on
both drives simultaneously so that each of the drives contains exactly the same data, mirroring each
other. If either of the drives should fail the other is there to seamlessly continue to provide operation.
RAID 0 (striping) increases the performance of the drive system by spreading the data across two
drives. RAID 0 is a proven technology for editing video, working with huge graphics les, sound
libraries, and streaming instruments that play hundreds of samples simultaneously. RAID 0 is the de-
fault shipping drive mode. In RAID 0 (striping) mode, the two drives are seen by the computer as one
large drive, and reading and writing occurs on both drives simultaneously. It is designed to increase
the performance and data throughput of the drive system. The GT 062E’s built-in RAID controller
splits each piece of data across both of the drives in segments and distributes the I/O burden. Since
data is written without any form of parity data-checking, it allows for the fastest data transfer of all
other RAID levels. However, if one drive becomes damaged, the data on both drives can become cor-
rupted. RAID 0 is not redundant or fault tolerant like RAID levels 1, 3, and 5, but the trade o is that
it’s the fastest of all RAID levels. MAKE SURE TO BACKUP YOUR DATA OFTEN!
In , the two drives are seen as one large drive and data is written sequentially across Spanning mode
them. When the rst drive lls to the limit, data is then written to the second drive. This mode is use-
ful for applications requiring large volumes, but not requiring the speed of RAID 0. Spanning does
not provide any performance or redundancy benets.
Using the GT 062E with Pro Tools® Software
The 3TB and 4TB GT 062E models only support Pro Tools® when they are congured in RAID 1 mode. This is
because RAID 1 shows to the operating system as half the total capacity (1.5TB for the 3TB, and 2TB for the
4TB). Currently, Pro Tools is limited to volumes that are 2TB or less in size. If you attempt to record or play-
back from any locations on the disk above 2TB, Pro Tools will give errors. If you set your GT 062E to Spanning
or RAID 0 mode, it will work until it is lled to 2TB, then it will give errors. This is currently an open issue that
we expect will be resolved in future releases of Pro Tools.

Specyfikacje produktu

Marka: Glyph
Kategoria: zewnętrzny dysk twardy
Model: GT062E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Glyph GT062E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje zewnętrzny dysk twardy Glyph

Glyph

Glyph Studio external hard drive Instrukcja

1 Października 2024
Glyph

Glyph Blackbox Pro Instrukcja

1 Października 2024
Glyph

Glyph StudioRAID mini Instrukcja

1 Października 2024
Glyph

Glyph BlackBox Plus Instrukcja

1 Października 2024
Glyph

Glyph BlackBox Instrukcja

1 Października 2024
Glyph

Glyph Studio Enterprise Class Instrukcja

1 Października 2024
Glyph

Glyph GT062E Instrukcja

1 Października 2024
Glyph

Glyph Studio mini Instrukcja

1 Października 2024
Glyph

Glyph Studio Instrukcja

1 Października 2024

Instrukcje zewnętrzny dysk twardy

Najnowsze instrukcje dla zewnętrzny dysk twardy

Origin Storage

Origin Storage Datalocker Instrukcja

9 Października 2024
LaCie

LaCie Mobile Drive Secure Instrukcja

9 Października 2024
Fantec

Fantec mobi X2U3-6G Instrukcja

9 Października 2024
Goodram

Goodram HX100 Instrukcja

9 Października 2024
Goodram

Goodram HL100 Instrukcja

9 Października 2024
Goodram

Goodram DataGO HDDGR-03-320 Instrukcja

9 Października 2024
Goodram

Goodram DataGO Instrukcja

9 Października 2024
IStorage

IStorage diskAshur DT USB 3.0 256-bit Instrukcja

8 Października 2024
Icy Box

Icy Box IB-RD3802-C31 Instrukcja

7 Października 2024
Icy Box

Icy Box IB-382H-C31 Instrukcja

7 Października 2024