Instrukcja obsługi Gigabyte R282-3C1
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gigabyte R282-3C1 (125 stron) w kategorii serwer. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/125
Gigabyte Server Management Console
User's Guide
Rev. 1.0
Copyright
© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE
without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of documentation:
UserManual:detailedinformation&stepsabouttheinstallation,congurationandusethis
product(motherboard),coveringhardware,BIOSandBMCrmware.
ServiceGuide:detailedinformation&stepsabouttheinstallation,congurationanduseof
this product (server barebones), covering hardware & BIOS
Quick Installation Guide: a short guide with visual diagrams that you can reference easily for
installation purposes
Please see the support section of the online product page to check the current availability of these
documents.
For More Information
Forrelatedproductspecications,thelatestrmwareandsoftware,andrelatedinformation,pleasevisit
our website at: http://www.gigabyte.com
For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our
reseller portal: http://reseller.b2b.gigabyte.com
For further information & technical assistance, please contact your GIGABYTE sales representative.
You may also message GIGABYTE server directly by email, Facebook or twitter.
Email: server.grp@gigabyte.com
Facebook: https://www.facebook.com/gigabyteserver
Twitter: https://twitter.com/GIGABYTEServer
- 3 -
Table of Contents
Chapter 1 Getting Started 5 ...............................................................................................
1-1 Software Requirement 5 .....................................................................................
1-2 GigabyteManagementConsoleNetworkConguration .................................. 6
1-3 Log In Gigabyte Management Console 7 ............................................................
1-3-1 Required Browser Settings: 8 ......................................................................................
1-4 Quick Button and Logged-in User 9 ....................................................................
1-5 Help ................................................................................................................ 10
1-6 Menu Bar 10 ........................................................................................................
Chapter 2 Enter Gigabyte Management Console .........................................................11
2-1 Dashboard ...................................................................................................... 11
2-2 Sensor ............................................................................................................ 12
2-2-1 Sensor Detail 13 ..........................................................................................................
2-2-2 Sensor Events 14 ........................................................................................................
2-3 System Inventory 15 ...........................................................................................
2-3-1 CPU Inventory 15 ........................................................................................................
2-3-2 DIMM Inventory 17 ......................................................................................................
2-3-3 PCI Inventory 18 ..........................................................................................................
2-3-4 HDD Inventory 19 ........................................................................................................
2-3-5 NIC Inventory 20 ..........................................................................................................
2-4 FRU Information 21 .............................................................................................
2-5 Logs & Reports 23 ..............................................................................................
2-5-1 IPMI Event Log 23 .......................................................................................................
2-5-2 System Log 24 .............................................................................................................
2-5-3 Audit Log 25 ................................................................................................................
2-5-4 Video Log 26 ...............................................................................................................
2-6 Settings .......................................................................................................... 27
2-6-1 Captured BSOD 27 ......................................................................................................
2-6-2 Date & Time ............................................................................................................28
2-6-3 External User Services 29 ...........................................................................................
2-6-4 KVM Mouse Settings 39 ..............................................................................................
2-6-5 Log Settings 40 ............................................................................................................
2-6-6 Manage Licenses 43 ...................................................................................................
2-6-7 Media Redirection Settings 43 .....................................................................................
2-6-8 Network Settings 48 ....................................................................................................
2-6-9 PAM Order Settings 56 ................................................................................................
2-6-10 Platform Event Filter 57 ...............................................................................................
2-6-11 Services ..................................................................................................................65
- 4 -
2-6-12 SMTP Settings 69 ........................................................................................................
2-6-13 SSL Settings 72 ...........................................................................................................
2-6-14 System Firewall 77 ......................................................................................................
2-6-15 User Management 85 ..................................................................................................
2-6-16 Video Recording 89 .....................................................................................................
2-6-17 FanProle ..............................................................................................................97
2-6-18 Power Consumption 99 ...............................................................................................
2-6-19 IMPI Interfaces 100 .....................................................................................................
2-7 Remote Control 101 ............................................................................................
2-8 Images Redirection 107 ......................................................................................
2-8-1 Remote Media 108 ......................................................................................................
2-9 Power Control 109 ..............................................................................................
2-10 Maintenance Group ...................................................................................... 110
2-10-1 BackupConguration ........................................................................................... 111
2-10-2 Firmware Image Location .....................................................................................112
2-10-3 Firmware Information ............................................................................................113
2-10-4 Firmware Update ..................................................................................................114
2-10-5 PreserveConguration .........................................................................................118
2-10-6 RestoreConguration ...........................................................................................122
2-10-7 Restore Factory Defaults 123 ......................................................................................
2-10-8 System Administrator ............................................................................................124
2-10-9 Sign Out 125 ................................................................................................................
- 6 - Getting Started
1-2 Gigabyte Management Console Network Conguration
Follow the instruction to enable the console redirection function.
1. You can gather the IP address on the POST screen.
2. Or, Go to BIOS setup menu.
3. Select .Server Management
4. Select . BMC network Conguration
5. DeneCongurationAddresssourcetoDynamicBmcDhcporStatic.
6. Save and Exit.
7. The BMC IP Address will appear on the IPv4 Address parameter.
8. SavethecongurationandexitBIOSsetupmenu.
Getting Started - 7 -
1-3 Log In Gigabyte Management Console
To access the Gigabyte Management Console, the BMC Web utility will prompt you to enter the
User Name and Password.
Theeldsareexplainedasfollows:
For basic login to the BMC Web UI, use the following login:
• Username: admin
• Password: Refer to unique MB serial number.
• US - English: Changes the interface language.
NOTE!
If your motherboard / server version is older than G9 (upgrade version), then use the
following login:
Username: admin
Password: password
This serial number can be found on the serial number sticker located on the motherboard of
every GIGABYTE server motherboard and system. The unique pre-programmed password will
be the last 11 characters of the serial number. For example, for the below serial number, the
password will be “JG4P6400027
- 8 - Getting Started
GIGABYTEwillalsoafxnewstickersthatdisplaytheuniqueBMCpassword(examplebelow)to
both the product box (packaging) and to the CPU cover (for motherboards sold separately) or the
server chassis.
Please see the reference guide below / attached for where to find locations of this sticker
according to product / model type.
Products that have been implemented with this change will be indicated as version G9 on the
“Upgrade Version” sticker located on the motherboard / motherboard anti-static packaging /
server chassis / server packaging.
Remember Username: Check this option to remember your login credentials.
Sign me in: After entering the required credentials, click the to login to GUI.Sign me in
I forgot my password: If you forget your password, you can generate a new one using this link.
Enter the user name, click on link. This will send the newly generated Forgot Password
passwordtotheconguredEmail-IDfortheuser.
1-3-1 Required Browser Settings:
Allow le download from this site: For Internet Explorer, Choose Tools ->Internet Options
->Security Tab, based on device setup, select among Internet, Local intranet, trusted sites and
restricted sites. Click .... In the Security Settings - Zone dialog opened, under Custom level
settings, find Downloads option, Enable File download option. Click to the entire dialog OK
boxes.
ForallOtherBrowsers,acceptledownloadwhenprompted.
Enable javascript for this site: The icon indicates whether the javascript setting is enabled in
browser.
Enable cookies for this site: The icon indicates whether the cookies setting are enabled in
browser.
Cookies must be enabled in order to access the website.
Getting Started - 9 -
1-4 Quick Button and Logged-in User
The user information and quick buttons are located at the top right of the Web GUI. A screenshot
of the logged-in user information is shown below.
User Information
The logged-in user information shows the logged-in user, his/her privilege and the four quick
buttons allowing you to perform the following functions:
Logged-in user and its privilege level
Thisoptionshowsthelogged-inusernameandprivilege.Therearevekindsofprivileges.
User: Only valid commands are allowed.
Operator: All BMC commands are allowed except for the configuration commands that can
change the behavior of the out-of-hand interfaces.
Administrator: All BMC commands are allowed.
No Access: Login access denied.
OEM: All OEM commands are allowed.
Refresh: Click the icon to reload the current page.
Sync: Click the icon to synchronize with Latest Sensor and Event Log updates.
US - English: Click to select the language of the Web GUI.
Warning: Click to view the warning messages.
Notication:Clicktheicontoviewthenoticationmessages.
Getting Started - 10 -
1-5 Help
Help - The Help icon (?) is Located at the top right of the each page in Web GUI. Click this help
icontoviewmoredetailedelddescriptions.
1-6 Menu Bar
The menu bar displays the following:
Gigabyte Server Management Console - 16 -
Gigabyte Server Management Console - 22 -
Product Information
• Product Information Area Format Version
• Language
• Product Manufacturer
• Product Name
• Product Part Number
• Product Version
• Product Serial Number
• Asset Tag
• FRU File ID
• Product Extra
Specyfikacje produktu
| Marka: | Gigabyte |
| Kategoria: | serwer |
| Model: | R282-3C1 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Gigabyte R282-3C1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje serwer Gigabyte
11 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
Instrukcje serwer
- serwer Sony
- serwer Supermicro
- serwer Lenovo
- serwer Acer
- serwer Technics
- serwer Hikvision
- serwer Fujitsu
- serwer Conceptronic
- serwer StarTech.com
- serwer Asus
- serwer Medion
- serwer TRENDnet
- serwer MSI
- serwer Toshiba
- serwer D-Link
- serwer ATen
- serwer APC
- serwer HP
- serwer Tripp Lite
- serwer Cisco
- serwer Moxa
- serwer Synology
- serwer Lindy
- serwer ZyXEL
- serwer Dell
- serwer Linksys
- serwer Digitus
- serwer Vimar
- serwer Netgear
- serwer Black Box
- serwer ELAC
- serwer Intellinet
- serwer HGST
- serwer Revox
- serwer Naim
- serwer SEH
- serwer Planet
- serwer NEC
- serwer LevelOne
- serwer Digi
- serwer Axis
- serwer Asrock
- serwer Abus
- serwer Rocstor
- serwer Western Digital
- serwer Smart-AVI
- serwer Promise Technology
- serwer QNAP
- serwer Chenbro Micom
- serwer Allnet
- serwer Veritas
- serwer IStarUSA
- serwer Silverstone
- serwer Ernitec
- serwer AVerMedia
- serwer Atlona
- serwer Gefen
- serwer Hanwha
- serwer Quantum
- serwer Blackmagic Design
- serwer Kathrein
- serwer Eaton
- serwer Monacor
- serwer Sonnet
- serwer In Win
- serwer Teo
- serwer Megasat
- serwer Areca
- serwer Kramer
- serwer KanexPro
- serwer Raritan
- serwer AMX
- serwer C2G
- serwer Acti
- serwer Sitecom
- serwer Maxdata
- serwer Matrox
- serwer Flir
- serwer Buffalo
- serwer GeoVision
- serwer LaCie
- serwer Valcom
- serwer Asustor
- serwer Intel
- serwer Fantec
- serwer Freecom
- serwer Seagate
- serwer Iomega
- serwer Luxman
- serwer Ibm
- serwer Provision ISR
- serwer TAIDEN
- serwer SIIG
- serwer Advantech
- serwer Extron
- serwer Avocent
- serwer Teradek
- serwer Silex
- serwer Sun
- serwer MvixUSA
- serwer Dual Bay
- serwer Raidsonic
- serwer EMC
- serwer Infortrend
- serwer Opengear
- serwer G-Technology
- serwer EXSYS
- serwer Middle Atlantic
- serwer Mr. Signal
- serwer Atlantis Land
- serwer Lantronix
- serwer NETSCOUT
- serwer Mobotix
- serwer Origin Storage
Najnowsze instrukcje dla serwer
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
10 Marca 2025
10 Marca 2025
10 Marca 2025
10 Marca 2025