Instrukcja obsługi Gemini 822
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gemini 822 (16 stron) w kategorii alarm samochodowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
UK
822
821
INSTALLATION AND
USE MANUAL
821
822
INSTALLATION CERTIFICATE
The undersigned qualified installer attests having personally fitted the here described vehicle
security system following the manufacturer instructions.
................................................
..........................................................................................................................
By :
Sold on : Type of product :
Vehicle :
AC2717/UK REV. 02 - 07/11
Made in Italy
GEMINI Technologies S.p.A.
Via Luigi Galvani 12 - 21020 Bodio Lomnago (VA) - Italia
Tel. +39 0332 943211 - Fax +39 0332 948080
Web site: www.gemini-alarm.com
Reg. n.532-A
UNI EN ISO 9001:2008
1.0
2.0
6.0
7.0
8.0
9.0
12.0
16.0
17.0
- PRELIMINARY ADVICE.............................................................................................
- OPERATING DESCRIPTION.....................................................................................
2.1 - Complete system arming..........................................................................................
2.2 - Passive arming.........................................................................................................
2.3 - Arming inhibit time....................................................................................................
2.4 - System armed..........................................................................................................
2.5 - Alarm, inhibit time between alarms and alarm cycles..............................................
2.6 - System disarming.....................................................................................................
2.7 - Alarm memory..........................................................................................................
NEW PIN-CODE PROGRAMMING......................
EMERGENCY DISARMING BY PIN-CODE..........
WARRANTY CONDITIONS ..................................
- CONNECTORS..........................................................................................................
6.1 - 20-way connector.....................................................................................................
6.2 - 8-way connector.......................................................................................................
- COMPLETE ELECTRIC DIAGRAM...........................................................................
- .......................
...................................................................................
..........................................................
8.3 - Connections to hazard push-button..........................................................................
- CENTRAL DOOR LOCKING CONNECTIONS TO ARM SYSTEM............................
.........................
.............................................
9.3 - Connection to turn indicators....................................................................................
DIP-SWITCHES PROGRAMMING TABLE...............................................................
- SYSTEM PROGRAMMING.............. ....................................
........................................................................................
.........................................................................
12.3 - Passive arming.......................................................................................................
12.4 - 5) ...........................................................................
12.5 - Boot push-button polarity selection........................................................................
12.6 - Impulse
............................................
..............................................
..........................................................
..........................................................................
..........................................................................................
....................................................................................................
- TECHNICAL DATA...................................................................................................
-
USER MANUAL
INSTALLER MANUAL
3.0
4.0
5.0
10.0
11.0
13.0
14.0
15.0
- ......................................................
- .....................................................
- ......................................................
CONNECTION TO ACTIVATE TURN SIGNALS.................................
8.1 - Conventional connections.....
8.2 - Connections on vehicles with separate lines..
9.1 - Connection - door locking motor unit with separate radio receiver..
9.2 - Connection - door locking motor unit with lock switch.
- SELF-LEARNING OF TURN INDICATORS FLASHES............................................
-
....................................
12.1 - Optical signalling.....,......
12.2 - Acoustic signalling.........................
Arming of siren (art. 772 output
visual signalling selection..........................................................................
12.7 - Select negative in alarm for horn or additional siren...
- SYSTEM PROGRAMMING EXAMPLE......................
- ULTRASONIC VOLUMETRIC PROTECTION
14.1 - Connections and positioning........
14.2 - Sensor regulation.........
- SYSTEM RESET..
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE.....
PAGE 02 USER MANUAL - PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 04
PAGE 04
PAGE 04
PAGE 05
PAGE 05
PAGE 06
PAGE 06
PAGE 06
PAGE 07
PAGE 08
PAGE 08
PAGE 08
PAGE 11
PAGE 11
PAGE 11
PAGE 11
PAGE 12
PAGE 12
PAGE 13
PAGE 13
PAGE 13
PAGE 13
PAGE 14
PAGE 14
PAGE 08
PAGE 09
PAGE 09
PAGE 09
PAGE 09
PAGE 10
PAGE 10
PAGE 11
PAGE 11
PAGE 11
TABLE OF CONTENTS
2.0 - OPERATING DESCRIPTION
2.1 - COMPLETE SYSTEM ARMING
2.2 - PASSIVE ARMING
Press the lock button on the original remote control of the vehicle; s
).
ystem arming is confirmed by a
siren chirp (if feature has been modified) and a flash of the turn indicators.
The system has a 30” pre-arming “neutral time” (indicated by LED permanently on
Once this function is programmed, the system is set to be passively armed about 60” after switching off
ignition and after opening and closing the last door.
System activation will be indicated by the normal visual and audio (if feature has been modified)
arming signal.
In case of passive arming, internal sensors and comfort output (automatic window
closing) will be excluded.
Opening a door 60” before the system is armed temporarily interrupts the procedure
which will resume once the door is closed.
USER MANUAL
2.3 - ARMING INHIBIT TIME
2.4 - SYSTEM ARMED
2.5 - ALARM, INHIBIT TIME BETWEEN ALARMS AND ALARM CYCLES
The inhibit arming time lasts approxiately 30” and is indicated by the LED on;
.
Afterthe inhibit time thesystem is “armed” and ready to detect any theft attempt.
When the system is fully armed, the LED flashes.
Ithe system will indicate theft attempt
before another alarm starts, there are 5“ of “neutral time”.
The alarm signalling has 10 cycles of 30” each for input and system arming cycles.
it is possible to exit the
vehicle without triggering any alarm
s by visual/audio signals.
After the alarm has been triggered, but
1.0 - PRELIMINARY ADVICE
Dear Customer,
Th
.
same as 822 without engine immobiliser.
:
GEMINI 821:
e present manual illustrates the top version of the alarm system; not all functions, electrical
connections etc. will therefore apply to all models.
Beforeinstalling, you must identify your alarm model and refer to it for the correct instructions
The following signs, intended for the installer or the user, indicate particular functions or connections
as follows
!
For the user.
This sign highlights useful information.
For the installer.
This sign indicates that the functionning of the alarm can vary according to connections
and programming of the system or it simply provides useful indications for the
installation.
UK
Specyfikacje produktu
| Marka: | Gemini |
| Kategoria: | alarm samochodowy |
| Model: | 822 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Gemini 822, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje alarm samochodowy Gemini
23 Września 2024
23 Września 2024
20 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
Instrukcje alarm samochodowy
- alarm samochodowy HP
- alarm samochodowy Cobra
- alarm samochodowy Waeco
- alarm samochodowy Viper
- alarm samochodowy Technaxx
- alarm samochodowy Audiovox
- alarm samochodowy Spy
- alarm samochodowy Jablotron
- alarm samochodowy GT
- alarm samochodowy Clifford
Najnowsze instrukcje dla alarm samochodowy
1 Października 2024
1 Października 2024
1 Października 2024
27 Września 2024
24 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024