Instrukcja obsługi Gemini 7090
Gemini
alarm samochodowy
7090
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gemini 7090 (9 stron) w kategorii alarm samochodowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/9
7090
7090
...................................
...........................................................
CERTIFICAT D' INSTALLATION
INSTALLATION CERTIFICATE
EINBAUBESCHEINIGUNG
Je soussigné,installateur,certifie d'avoir fait personnellement l'installation du dispositif d'alarme
du véhicule ci décrit,conforme aux instructions du constructeur.
The undersigned,qualified installer,attests to have personally fitted the here described Vehicle
Security sistem following the manufacturer instructions.
Der Installateur bestätigt mit seiner Unterschrift, daß die Alarmanlage in dem genannten Fahrzeug
nach Vorgaben Des Herstellers eingebaut wurde.
Signature,Firma,Assinatura,Unterschrift .................................................................
AC 2519 - REV. 00 / 03 / 01
CERTIFICADO DE INSTALACION
El que suscribe, instalador, certifica el haber seguido personalmente la instalación del dispositivo
de alarma del vehículo descrito a continuación, de acuerdo con las instrucciones del fabricante.
CERTIFICATO DI INSTALLAZIONE.
Il sottoscritto,installatore,certifica di aver eseguito personalmente l'installazione del dispositivo
di allarme del veicolo descritto qui di seguito,conformemente alle istruzioni del fabbricante.
No forest has been destroyed to
produce this 100% recycled paper.
by GEMINI TRADING S.r.l. Via Luigi Galvani 12 21020 Bodio Lomnago (VA) Italia
Tel. +39 0332 943211 - Fax +39 0332 948080
E-mail : info@gemini-alarm.com
CERTIFICADO DE INSTALAÇAO
~
O abaixo assinado,instalador,certica que executou pessoalmente a instalaçao do dispositivo
de alarme do veículo descrito a seguir,conforme as instruçoes do fabricante.
~
~
By :
Da :
Par :
Von :
Por :
De :
Sold on :
Venduto il :
Vendu le :
Verkauft am :
Vendido el :
Vendido em :
Type of product :
Tipo di prodotto :
Produktartikel :
Type de dispositif:
Dispositivo ciclo :
Tipo de dispositivo :
Car
Véhicule
Fahrzeug
Veículo
Auto
7208
0682
DESCRIPTION
GEMINI 7090
The system 7090 is an alarm system with sensors, which can be installed on cars with 12 volts battery (negative earth).
FUNCTIONS
- Remote controlled modular alarm with dynamic code.
- Blinker, universal central door locking control, electric windows and sunroof closure for selected vehicles
equipped with “Pack Comfort” system.
- Perimetric and volumetric protection.
- Controls for self-powered and additional siren (continuous or alternate sound).
- LED’s Memory, acoustic arming and disarming (through siren or horn).
- Remote controlled panic function and/or boot opening.
- Electric engine immobilisation.
- Alarm unit functions programmable through the transmitter.
The unit is equipped with two 2-channel transmitters (art. 7208E, frequency 433.92 Mhz) and two electronic keys
(CDE2).
Gemini 7090W
The system 7090W has the same functions of the 7090 but without the electronic keys and the receptacle.
USEFUL SUGGESTIONS FOR THE INSTALLATION
- Connect the positive and negative feeding wire of the alarm system to the battery.
- Connect always the alarm Green-Brown wire to the door pin switch.
- On catalysed vehicles the engine immobilisation must be carried out on the fuel pump and the starter motor.
- Avoid routing connection wires next to interference sources.
- The ultrasonic heads must be positioned at the top of each windscreen pillar and must be pointing at each
opposite diagonal corner away from the facia outlets.
WIRING CONNECTIONS
Disconnect the negative terminal of the battery and only re-connect after the installation is complete.
FUNCTION WIRE COLOR
Earth ðð BROWN
Battery positive terminal ðð RED
Engine immobilisation (max. 10 A) ðð 2 X GREY
Ignition live ðð YELLOW
Direction indicator lights ðð 2 x ORANGE
Door pin switch ðð GREEN-BROWN
Boot/bonnet pin switches ðð GREEN
Positive alarm armed ðð PINK
External sensors inlet ðð GREEN-BLACK
Self-powered siren control ðð BLUE
Additional siren negative control or klaxon ðð YELLOW-BLACK
Comfort positive ðð RED-BLACK
Comfort negative ðð WHITE-BLACK
Central door locking ðð
YELLOW- -BLUE, RED BLUE, YELLOW-GREY,
RED-GREY, YELLOW- -BROWN, RED BROWN
Note: The wiring harness has 3 connectors: connect the two 2-pin connectors to the receptacle of the
electronic key (art. 2390) and the connector with the thermal yellow sheath to the immobiliser. In the
7090W there are two connectors. One 2-pin connector to connect to the LED, the connector with the
thermal Yellow sheath to an immobiliser.
Table of programmable functions through the two-channels transmitter.
ACTIONS ALARM CONDITION VISIBLE
ACTIONS
LED FLASHING AND
SELECTED FUNCTIONS
ALTERNATIV
EACTIONS
POWER OFF Alarm OFF - - -
Turn the ignition
key to ON
Alarm OFF
-
-
-
FEED THE UNIT
7090
Alarm ON - - -
Push on the
transmitter 1 button
within 10 seconds
Access to the Set-up 1
function: Supplementary siren One blinker
flashing
One flashing = continuous
Two flashing = intermittent
Push on the
transmitter 1 button
Access to the Set-up 2
function : acoustic signalling
with supplementary siren
Two blinker
flashing
One flashing = de-activated
Two flashing = activated
Push on the
transmitter 1 button
Access to the Set-up 3
function: Panic and additional
siren or boot opening through
the transmitter
Three blinker
flashing
One flashing = Panic and
additional siren
Two flashing = Boot opening
Push on the
transmitter 1 button
Access to the Set-up 4
function: boot opening while
alarm armed
Four blinker
flashing
One flashing =
While alarm disarmed
Two flashing =
For both functions
Push on the
transmitter 1 button
Access to the Set-up 5
function: vehicle check while
arming the system
Five blinker
flashing
One flashing = de-activated
Two flashing = activated
Push on the
transmitter 1 button
Access to the Set-up 6
function: closure control period Six blinker
flashing
One flashing = 0,5 seconds
Two flashing = 6 seconds
Push on the
transmitter 1 button
Set-up function 7 function:
Passive arming Seven blinker
flashing
One flashing = de-activated
Two flashing = activated
Push on the
transmitter 1 button
Set-up 8 functi voltage drop
sensor Eight blinker
flashing
One flashing = de-activated
Two flashing = activated
Press the
transmitter 2
button to
change the
selected
option.
De-activate
+15 to
memorise the
selected
options and to
exit from User
set-up.
Turn the ignition
key to OFF
Set-up exit, normal working
of the alarm - - -
Recapitulatory table of the programmable functions through the
two-channels transmitter.
Function Manufacturer
function
Programmable
function
1 Additional siren outlet Continuous sound Alternate sound
2 Acoustic signalling De -activated Activated
3 Boot opening with alarm disarmed De -activated Activated
4 Boot opening with alarm armed De -activated Activated
5 Vehicle’s check De -activated Activated
6 Central door locking period 0,5 seconds 6 seconds
7 Passive arming De -activated Activated
8 Voltage drop sensor De -activated Activated
WORKING DESCRIPTION
- Alarm arming with the transmitter: push on the transmitter’s 1 button. One pulse of the direction indicator
lights and the door closure signals the arming.
- Alarm arming with electronic key: approach the key to the appropriate socket found in the vehicle passenger’s
compartment. The arming is signalled through a direction indicator lights flashing; the doors closure is not
activated.
- Alarm arming with exclusion of the volumetric sensor, external sensors and comfort control after the
alarm arming: while alarm armed, during the inhibit time (Led lightning fix) push on the transmitter 2 button. The
arming is signalled by one pulse of the direction indicator lights and the door closure, the comfort function and the
sensors are excluded.
NOTE: This function de-activates at the first arming of the alarm.
- Alarm disarming with the transmitter: push on the transmitter’s 1 button. The disarming is signalled through
3 pulses of the direction indicator lights or 5 pulses if an alarm condition has occurred.
- Alarm disarming with the electronic key: with the alarm armed open the vehicle’s door and approach the key
to the appropriate socket. The disarming is signalled through 3 pulses of the direction indicator lights or 5 pulses
if an alarm condition has occurred.
SPECIAL FUNCTIONS
SELF-LEARNING OF THE CODE OF A NEW TRANSMITTER OR A NEW ELECTRONIC KEY.
1. FOR THE USER.
While alarm disarmed turn the ignition key to ON, open the driver’s door and push on the transmitter 2 button.
The Led and the direction indicator lights activate. Turn the ignition key to OFF and push on the new
transmitter 1 button or approach the electronic key to the receptacle within 8 seconds from the Led and the
direction indicator lights switching off.
For each new code it is necessary to turn the ignition key to ON and then to OFF. At the end of the self-learning
operation, after 8 seconds the system works normally.
2. FOR THE INSTALLER.
While alarm disarmed push on the button found in the 7090TN unit positioned in the right and rear side of the
angle of the printed circuit. Turn the ignition key to ON for 1 second and then to OFF and push on the new
transmitter 1 button or approach the electronic key to the receptacle.
For each self-learning of the new code it is necessary to turn the ignition key to ON for one second and then to
OFF. At the end of the self-learning operation, after 8 seconds the system works normally.
NOTE: the system is supplied with a maximum number of 8 devices (transmitters and keys).
ENGINE IMMOBILISATION.
The engine immobilisation (with the 7 function activated) is obtained 60 seconds from the engine switching OFF.
The Led lights quickly. To de-activate the engine immobilisation it is necessary to turn the ignition key to ON and to
push on the transmitter 1 button or to approach the electronic key to the receptacle. When the Led stops flashing it
is possible to start the engine.
NOTE: THE ARMING OF THE EN GINE IMMOBILISATION ACTIVATES ALWAYS 60 SECONDS AFTER THE ENGINE SWITCHING OFF (IF
THE FUNCTION HAS BEEN ACTIVATED IN THE PROGRAMMING).
REMOTE CONTROLLED BOOT OPENING.
The alarm unit 7090 allows opening the vehicle boot if the control is electric and negative. This function is obtained
(if the 3 function is activated) pushing on the transmitter 2 button with alarm disarmed.
If the boot opening is carried out pushing on the transmitter 2 button with the alarm armed (if the 4 function is
activated), the panic function will de-activate and all the inlets inhibit for 60 seconds. To avoid the alarm triggering, it
is necessary to close the boot within this delay time. The opening of the boot is signalled by one pulse of the
direction indicator lights.
PANIC FUNCTION
To obtain this function with the alarm armed after the neutral time push on the transmitter 2 button. The siren, the
klaxon and the direction indicator lights activate. To de-activate this function push on the transmitter 2 button within
the 10 seconds of the alarm cycle.
LEDS MEMORY.
At the alarm disarming it is possible to verify the alarm triggering cause turning the ignition key to ON. Following the
Led flashing it is possible to identify the triggering cause.
Signalling LED Alarm triggering Alarm cycle
¬ ¬l Ultrasonic sensor 10
¬¬ ¬¬l Door and boot/bonnet pin switches. 10
¬¬¬ ¬¬¬l Ignition live Unlimited
¬¬¬¬l¬¬¬¬ External sensors 10
¬¬¬¬¬ ¬¬¬¬¬l Voltage drop sensor 10
l LED OFF (2 seconds) ¬ LED ON (1 second)
Each alarm cycle is 30 seconds.
The inhibit time is 30 seconds for all alarm triggering’s cause.
GARAGE POSITION.
The user can select this function with the transmitter only if the function of the engine immobilisation has been activated.
The garage position allows the user to exclude temporarily the ACTIVATION of the ENGINE IMMOBILISATION in order to
leave the vehicle in the servicing or in the washing centres without giving the original transmitters or the electronic keys to
the staff.
Activation of the Garage function.
1. While alarm disarmed, turn the ignition key to ON.
2. Turn the ignition key to ON, within 15 sec. push on the transmitter 2 button. The LED sig nals the activation of
the function with 2 pulses.
NOTE: do not open any door during this period. The procedure of the Garage function will automatically annul
if the button is not pressed within the 15 sec.
3. Turn the ignition key to OFF position.
In this condition it is possible to start the engine of the vehicle for a max. of 20 attempts without obtaining the
passive arming of the system.
The correct working of the GARAGE position is signalled by one acoustic signalling while starting the vehicle
engine and through the fast flashing of the Led if the ignition key is in ON position.
De-activation of the Garage function.
The de-activation of the GARAGE function is obtained arming the alarm system with the transmitter or the electronic
key or automatically at the end of the 20 attempts to start the engine.
ULTRASONIC ADJUSTMENT AND TEST PROCEDURE
The LED supplied with the kit is also used to signal the adjustment of the volumetric sensor.
The procedure is the following:
- Lower one of the front windows 20 cm. approximately.
- Adjust the trimmer to a medium sensitivity.
- Arm the alarm with the sensor exclusion function and wait till the end of the inhibit time signalled through the
flashing Led.
- Push a hand through the open window and move it. The LED will flash when the movement has been detected. If
the LED does not flash increase the sensitivity and repeat test.
Specyfikacje produktu
| Marka: | Gemini |
| Kategoria: | alarm samochodowy |
| Model: | 7090 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Gemini 7090, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje alarm samochodowy Gemini
23 Września 2024
23 Września 2024
20 Września 2024
14 Września 2024
12 Września 2024
10 Września 2024
7 Września 2024
3 Września 2024
2 Września 2024
1 Września 2024
Instrukcje alarm samochodowy
- alarm samochodowy HP
- alarm samochodowy Cobra
- alarm samochodowy Waeco
- alarm samochodowy Viper
- alarm samochodowy Audiovox
- alarm samochodowy Spy
- alarm samochodowy Jablotron
- alarm samochodowy GT
- alarm samochodowy Clifford
Najnowsze instrukcje dla alarm samochodowy
1 Października 2024
1 Października 2024
1 Października 2024
27 Września 2024
24 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024