Instrukcja obsługi Gama Sonic Baytown GS-106P

Gama Sonic światło Baytown GS-106P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gama Sonic Baytown GS-106P (4 stron) w kategorii światło. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
BAYTOWN SOLAR LAMP
US Patent # 7172307
Instruction Manual
Model: GS-106P/GS-106W/GS-106F
Fig. 1
Introduction
Thank you for your purchase. solar charged accent lighting eliminates the problems GAMA SONIC®
associated with most solar lighting available today. GAMA SONIC® solar charged lights are brighter and
last all night with a typical solar charge. Unique design, superior light output and numerous installation
options confirm the outstanding value of our product.
GAMA SONIC® has been recognized as a worldwide leader in the lighting industry for over 20 years. The
company also offers unique multi-purpose rechargeable products that range from party lights to
emergency lighting products.
For technical assistance and more information call our Toll Free number:
800-835-4113 (only within the US) or visit our website at: .
www.gamasonic.com
Please read the instruction manual carefully to obtain the best results from your purchase.
Tools that are needed but not supplied with the solar post lamps are: a screw driver, power drill.
Solar Lamp Location:
For optimum light duration throughout the night, it is very important to place your solar lamp in a spot
where it will receive the maximum amount of direct sunlight throughout the day.
NOTE:
For best results, the solar lamp post must be charged for two sunny days in the OFF (O) position.
Operation Instructions
1. Remove part (B) from part (C) by unscrewing the 2 screw caps. Turn the operation switch
(Fig. 2) to ON (|) position, the Solar Lamp will automatically operate dusk to dawn.
2. Reattach part (B) to part (C) and secure with the 2 screw caps.
Fig. 2
Installation Instructions
1. Install finial by screwing part (A) into part (B) (Fig. 1).
GS-106P
1. Use a drill to make two holes in the desired surface,
2. Place the white screw anchors into the drill holes, place the lamp in line with the holes and
screw down with the provided screws
.
Note: There are specific types of screws for specific surfaces. If unsure of the appropriate type of
screw to use on your desired surface please consult a professional.
GS-106W
NOTE: For best results locate your solar lamp facing the south.
1. Remove the silver back bracket by removing the 2 screw caps on the front face of the
wall mount.
2. Screw the silver bracket onto the desired surface.
3.
Place lamp onto bracket and replace 2 wall mount screw caps
.
GS-106F
NOTE: If you are replacing an existing gas/electric post light, you must consult a certified
technician to cancel them before installation.
1. Position Part (D) on top of the existing 3” post and tighten it using the screws provided.
Replacing the Batteries
(After several years of use, the battery may need replacing).
1. Unscrew the two screw caps and detach part (B) from part (C). Make sure the ON/OFF
switch is in the OFF(O) position.
2. Unscrew the battery compartment screw, (Fig. 2) located on the silver reflector and
remove the compartment door.
3. Unclip the connector and remove the old battery. Make sure the new battery is high
quality 3.2V/1,500mAh Lithium-ion Rechargeable battery with connector.
4. Clip on new battery and install into the battery compartment. Screw back battery
compartment screw.
5. Reattach part (B) to part (C) and secure with the 2 screw caps.
WARNING: Do not dispose of Li-Ion battery in the regular trash, municipal waste stream or by fire as
batteries may leak or explode. Do not open, short circuit, or mutilate batteries as injury may occur.
Preserve our environment by recycling Li-Ion batteries or disposing of them in accordance with local,
State and federal regulations. Do not mix old and new batteries.


Specyfikacje produktu

Marka: Gama Sonic
Kategoria: światło
Model: Baytown GS-106P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Gama Sonic Baytown GS-106P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje światło Gama Sonic

Instrukcje światło

Najnowsze instrukcje dla światło

Livarno Lux

Livarno Lux IAN 89559 Instrukcja

26 Października 2024
Livarno Lux

Livarno Lux IAN 37695 Instrukcja

26 Października 2024
Livarno Lux

Livarno Lux IAN 292044 Instrukcja

26 Października 2024
Livarno Lux

Livarno Lux IAN 279890 Instrukcja

26 Października 2024
Livarno Lux

Livarno Lux IAN 286986 Instrukcja

26 Października 2024
Livarno Lux

Livarno Lux IAN 282512 Instrukcja

26 Października 2024
Livarno Lux

Livarno Lux IAN 273535 Instrukcja

26 Października 2024
Livarno Lux

Livarno Lux IAN 280201 Instrukcja

26 Października 2024
Livarno Lux

Livarno Lux IAN 66760 Instrukcja

26 Października 2024
Livarno Lux

Livarno Lux IAN 288563 Instrukcja

26 Października 2024