Instrukcja obsługi Friedland HISK1 GlobalGuard Alarm System

Friedland Bezpieczeństwo HISK1 GlobalGuard Alarm System

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Friedland HISK1 GlobalGuard Alarm System (78 stron) w kategorii Bezpieczeństwo. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/78

GlobalGuard Alarm System

HISK1

Hardware Installation and Operating Manual

FOREWORD

All devices in this wireless Alarm System are

designed and manufactured to provide long

reliable service. The system is designed for

ease of installation using only conventional

domestic tools. However, it is essential that the

installer reads and fully understands the advice

and procedures contained in this manual and

plans the system before proceeding with the

installation.

IMPORTANT:

LOCAL AUTHORITY REGULATIONS

AND LEGISLATION'

This alarm system should be installed and

operated in accordance with the requirements of

any current local and/or national regulations and

legislation. We recommend that you contact

your authority to obtain details of your area's

requirements local and/or national regulations.

For example in Belgium, the installation and use

of an alarm system including notification by

telephone (Voice Dialler) functionality and the

optional use of an external siren is controlled by

Belgium legislation "KB" of 19/06/2002.

DECLARATION

Novar ED&S hereby declares that this wireless

alarm system is in compliance with the essential

requirements and other relevant provisions of

the Radio and Telecommunications Terminal

Equipment (R&TTE) directive, 1999/5/EC.

Tools and Equipment Required:

No.0 Philips Screwdrivers

Bradawl

No.1 Philips Screwdrivers

Drill

No.2 Philips Screwdrivers

3mm Drill Bit

Small Spirit Level

5 & 6mm Masonry Drill Bits

DEVICE RANGE

The quoted range of the system devices (see

component specification on rear cover) is

measured in ideal conditions. Any solid object

(e.g. walls, ceilings, reinforced PVC doors etc)

placed between the transmitter and Receiver

device will reduce the radio range.

The amount by which the range will be reduced

is dependent upon the nature of the barrier. For

example:

Wall Type Range

Reduction

Dry-lined partition wall: 10-30%

Single layer brick wall: 20-40%

Double layer brick wall: 30-70%

Metal panel/radiator: 90-100%

Note: The effect on the range of multiple walls is

cumulative. i.e. if there are 2 brick walls in the

way, the range will be reduced by up to 40% by

each wall.

SYSTEM SECURITY

This system has been designed to both detect

intruders and act as a strong deterrent to would-

be intruders when installed correctly.

Please remember that given adequate

knowledge and time it is possible to overcome

any alarm system and we therefore recommend

that your Alarm is used in conjunction with good

physical protection such as security window and

door locks.

All units in the system are encoded to operate

together using an 20 bit rolling House Code.

The system House Code is automatically

changed each time the system is

armed/disarmed or triggered by a detector.

The system can be operated from one or more

accessory Remote Control Units and/or

Keypads. It can also be operated remotely over

the internet using a PC or mobile

device(Android/Apple IOS device). Care should

be taken to ensure that any of your Remote

Control Units are not lost or the User Access

PIN Code for the Control Panel do not become

known to other people as this will compromise

the security of your system. The User Access

PIN Code should be changed as soon as

possible.

HOME AUTOMATION CONTROL

The system allows you to create Programmes,

Schedules and Events using the GlobalGuard

PC setup software. Home automation allows you

to control wireless ON/OFF switching devices

together with security arming. There are 3

function keys I/II/III located on the side of the

Control Panel which are programmable via the

PC software and each function key can store a

Programme. The activation of a Programme can

be instantly activated simply by pressing one of

the corresponding function keys.

REMOTE ACCESS AND SYSTEM

REQUIREMENTS

This system is supplied pre-linked to an IP

gateway module which allows you to remotely

access and control your system via the internet.

In order to get the full benefits of the system,

please ensure you meet the following

requirements:

• A broadband router with x2 spare LAN ports

(x1 for IP gateway and other for an optional IP

Camera if added in future)

- An unrestricted internet broadband

connection with wired or wireless (Wifi)

connectivity. (For optional wireless

indoor CCTV accessory, Wifi will allow

you connect the camera to the router

wirelessly)

- A PC with;

• Operating System:

Windows XP/Vista/Window7

• Internet Explorer 6.x or higher Internet

Web Browser

• CPU: Pentium 4, 1GHz or above

• VGA Card Resolution: 800x600 or

above

• Video Memory Size: 128Mb or above

• Recommended internet upload speed

512kbp/s for 1 x IP Camera (optional)

or 2Mbp/s for 8 x cameras connected

Optional Android or Apple IOS

Smartphone/mobile device;

• IOS: iPhone1/2/3/4, iPad1/2, iPod

Touch 4 up to IOS V4.3. 4(latest iOS

Version release)

• Android: Android phone V2.X, tablet PC

tested up to V4.0

PROGRAMMING THE SYSTEM

The system can be setup using the instructions

in this manual or alternatively using the

GlobalGuard PC setup software available at

www.GlobalGuard.Friedland.co.uk

Note that home automation Programmes,

Events and Schedules can only programmed

using the PC software. This means that the

function keys I/II/III located on the side of the

Control Panel can only be programmed from the

PC software.

If using a PC to run the setup software then

ensure that it is connected wired or

wirelessly (WIFI) to the same internet

broadband router as that connected to the IP

Specyfikacje produktu

Marka:	Friedland
Kategoria:	Bezpieczeństwo
Model:	HISK1 GlobalGuard Alarm System

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Friedland HISK1 GlobalGuard Alarm System, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Bezpieczeństwo Friedland

Friedland FGGK Series Software Instrukcja

25 Września 2024

Friedland FGGK Series Instrukcja

24 Września 2024

Friedland E4170 Instrukcja

18 Września 2024

Friedland FGGK0201WWE Instrukcja

15 Września 2024

Friedland E4070 Instrukcja

12 Września 2024

Friedland SA3F Instrukcja

11 Września 2024

Friedland HISK1 GlobalGuard Alarm System Instrukcja

11 Września 2024

Friedland E4002 Instrukcja

10 Września 2024

Instrukcje Bezpieczeństwo

Najnowsze instrukcje dla Bezpieczeństwo

NetworX NX-595E IP Communication Module Instrukcja

5 Października 2024

Geemarc SOS-PRO 295 Instrukcja

2 Października 2024

One2track Safety Angel Instrukcja

28 Września 2024

Sygonix SY-3851632 Instrukcja

28 Września 2024

Sygonix 1326052 Instrukcja

28 Września 2024

Sygonix 43588A WLAN Camera Instrukcja

28 Września 2024

Sygonix 43176S LAN Camera Instrukcja

28 Września 2024

Sygonix SY-3181234 Instrukcja

28 Września 2024

Sygonix Touch IP65 Instrukcja

28 Września 2024

Sygonix 1882082 Instrukcja

28 Września 2024