Instrukcja obsługi Fredenstein Artistic Leveler

Fredenstein edytor Artistic Leveler

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fredenstein Artistic Leveler (5 stron) w kategorii edytor. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
Artistic
Leveler
Operating Manual
Fredenstein Artistic Leveler
The Artistic Leveler is a single channel opto compressor with multi-channel link capability in the
500 series form factor. If used in Fredenstein Bento 6 or Bento 10 racks, an external side-chain
input is available through the Bento's Aux input connector.
The Leveler features rotary controls for Input Gain, Release Time, Compression Ratio, Make-up
Gain and Wet-Dry Mixing (parallel compression). The Attack Time can be set in three steps, as
well as the side-chain low cut filter. The side-chain can be fed externally by activating the SC Input
switch. The LED bar-graph meter indicates the gain reduction in the range of 1dB to 16dB. Its
punchy and detailed sound is generated by three major components:
1) Fredenstein's proprietary Reverse-Mancini opto architecture
2) our advanced OPA2 discrete Audio Operational Amplifier
3) the American made vintage style steel core output transformer
As all Fredenstein products, the Artistic Leveler is designed by a German-American team and
manufactured in Taiwan.
Installation:
Please power down your rack or box first, before inserting the Artistic Leveler. Since the Artistic
Leveler uses the link interconnect in the box or rack, it cannot coexist with any other third-party
modules using the same link interconnect (PIN 6 on the edge connector). If you are using a
Fredenstein Bento box, please turn off the compressor link switches to any third party module(s),
only turn on the link switches between Artistic Leveler modules.
Other third party equipment not using the link interconnect, such as most Mic-Pres and EQs etc,
can be used simultaneously with the Artistic Comp in any enclosure. The power requirements are
very light at maximum of +/-16V, +/-75mA and should not overload any enclosure.
Fredenstein Artistic Leveler Manual V1.0 Aug. 21, 2015 Page 1
Fredenstein Artistic Leveler
Rotary Controls:
INPUT : Sets the line level gain in the
range of -10 dB to +20 dB
RAT : Sets the compression ratio in the
range of 2:1 to 7.5:1
REL : Sets the release time of the
compressor from 0.3s to 5s
OUTPUT : Make-up gain control in the
range of 0 dB to +20 dB
MIX : Output Mixer between the
compressed (wet) and
uncompressed (dry) signals
Switches:
SC Filter : Selects the low cut filter in the
side-chain.
lower position: off
middle position: 300Hz
upper position: 150Hz
SC Input : Position INT: Normal operation
EXT: Enables the external side-
chain input when used in Bento 6
or 10 racks through the AUX
input connector
LINK : Multi-channel synchronization
for two or more Artistic comp
modules. All channels will have
identical gain reduction to avoid
shifts in the balance
ATT : Compressor Attack Time
lower position: 0.5 ms
middle position: 25 ms
upper position: 5 ms
ON/BYP : in upper ON position, the
compressor is active, in the lower
BYP (BYPASS) position or if the
rack is powered down, a relay
connects the output directly to
the input, the gain reduction
meter will still show the depth
of compression
Indicators:
CLIP LED : Lit when the output level reaches
+24dBu (2db before clipping)
GR (Gain Reduction) : Shows actual gain reduction in
the range of 1db to 8db in one db
steps and 2dB for 8dB to 16dB
Fredenstein Artistic Leveler Manual V1.0 Aug. 21, 2015 Page 2


Specyfikacje produktu

Marka: Fredenstein
Kategoria: edytor
Model: Artistic Leveler

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fredenstein Artistic Leveler, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą