Instrukcja obsługi Flycam Flowline Starter
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Flycam Flowline Starter (8 stron) w kategorii Statief. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
1
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Flowline Starter with Edge V1 Stabilizaon Arm
(FLCM FLN EGV1) - -
Flycam Flowline
Starter
Edge V1 Arm
Bag Packing
2 x Washers
2mm Allen Key
2.5mm Allen Key
2 x Velcro
A s s e m b l y M a n u a l
2
• Similarly, remove the second screw.
• Now, remove the Hook from the Flowline
Support Arm.
• As shown in the image, take the Cord
bundle out from the Cup and pull the Cord
unl a Cord lock comes out.
• Separate the Cord and the Cord lock.
• Keep the lock aside to re aach it later.-
Flowline Starter with Edge Setup
• Loosen the screw of the Camera Hook
aached to the Flowline Support Arm using
the Allen key.
• Similarly, separate the Cord from the Cup to
mount it back later.
NOTE: It is recommended to aach the minimum required weight (3kg / 6.6lb) for pulling down the
balancing rope to ensure proper operaon of your Flycam Flowline system.
3
• To detach the Flowline Support Rod
pull it upwards.
• To detach the extension from the Support
Rod of the Vest, remove its screw using a
screwdriver.
• Detach the extension from the Support Rod
and align the cord with the height riser,
(Not Included) as shown in the image.
• Dissemble the Camera Hook and the
Support Rod from the Vest.
• Aach the extension with the height riser
(Not Included) and push it inside.
Feature: Height riser that oers up to 4" of
vercal extension for taller operators and a
lockable hook to secure any camera, gimbal,
or cage eortlessly.
Specyfikacje produktu
Marka: | Flycam |
Kategoria: | Statief |
Model: | Flowline Starter |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Flycam Flowline Starter, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Statief Flycam
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
Instrukcje Statief
- Statief Sony
- Statief SilverCrest
- Statief IOptron
- Statief DJI
- Statief Konig & Meyer
- Statief Rollei
- Statief Velleman
- Statief ARRI
- Statief Zhiyun
- Statief Bresser
- Statief Hama
- Statief Gravity
- Statief AVerMedia
- Statief Magnus
- Statief Levenhuk
- Statief Robus
- Statief Benro
- Statief Sachtler
- Statief Sunpak
- Statief Slik
- Statief Gitzo
- Statief Proaim
- Statief Square Jellyfish
- Statief Velbon
- Statief Ultimate Support
- Statief Oben
- Statief Kessler
- Statief MOZA
- Statief ProMediaGear
- Statief Cullmann
- Statief 3 Legged Thing
- Statief On Air
- Statief Kaiser Fototechnik
- Statief SteadiCam
- Statief Fat Gecko
- Statief Studio Assets
Najnowsze instrukcje dla Statief
6 Października 2024
6 Października 2024
6 Października 2024
6 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024