Instrukcja obsługi FlinQ FQC8156
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla FlinQ FQC8156 (20 stron) w kategorii Nausznik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/20
EN
FLINQ ELITE WIRELESS EARBUDS
FQC8156
V1 User Manual
Specifications:
TWS (True Wireless Stereo); Elite wireless design, individual channel left and right,
HIFI True stereo sound with deep bass quality.
Both the left and right earbuds are connected via Bluetooth. These can be used
individually or as a pair.
Bluetooth version: V5.0+EDR low using
Bluetooth mode: A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3 Stereo mode
Bluetooth frequency: 2.4 ~ 2,485 Ghz
Bluetooth range: +- 10 meters in open space
IP Grade: IP-X3 splash proof
Battery status indicator support: yes*
Speaker driver frequency: 20 ~ 18000 Hz
Talk/playtime 1 set of earbuds (L+R) mode: 3 - 3.5 hours max.*
Stand by time 1 set of earbuds (L+R) mode: 80 - 120 hours max.*
Charge time docking case: 90 minutes max.
Charge time for earbud(s): 90 minutes max.
Docking case capacity to re-charge the earbuds: 5 times max. for both earbuds,
or 10 times for a single earbud.
*Note:
Depends on phone brand, type and / or model
AUTO ON/OFF:
This product is made with an auto sensor switch to turn the earbuds on and off
automatically when you open or close the lid from the docking case. Open the lid
is auto ON, close the lid is auto OFF.
TIP: The earbuds can also be manually set ON and OFF by the touch sensor
button.
Pairing:
1. Pair with 1 earbud:
a)Open the docking case, the sensor switch will power it on, then the left and right
earbuds will be paired to each other automatically. Then choose 1 of the 2
earbuds and close the case.
b)Turn on Bluetooth on your mobile device and select “FlinQ Elite Wireless
Earbuds” from the list. You will then hear a voice that says that you
are“connected”. From now on you can listen to music and you are able to
receive calls. The Elite Wireless earbuds also supports incoming calls.
*Note:
During phone calls only 1 earbud works (depends on phone brand and / or
model), you can keep the other earbud in the charging dock. When take out the
other earbud to use, the both earbuds will connect each other automatically to
be synchronized including the memory function.
2. Pair with both earbuds:
a)Open the docking case, the sensor switch will power it on, then the left and right
earbuds will be paired to each other automatically. Take out both of the 2
earbuds, the right earbud work as host.
b)Then enable Bluetooth on your device and select " Flinq Elite Wireless Earbuds"
from the list. When the LED light slowly blinks blue, the earbuds have been
successfully connected. The battery status is visible on your mobile phone (if
supported).
c)You will hear the message "connected" for verification.
Note:
During phone calls two earbuds work, and on both sides you can control Power
off/Play/Pause individually during the connection. The other earpiece is then
synchronized. The memory function is automatically supported when
reconnecting both devices (both earbuds and the device) that were used last
time!
Bluetooth use:
1.Making phone calls:
Make sure the earbuds are connected to your mobile device. You can call now.
With phone calls, 1 or 2 of the earbuds works. You will hear the telephone number
when you receive a call.
You answer the call by pressing the right or left touch button once. To reject the
call, press 2x quickly the right or the left touch button so the call is rejected. When
the earbuds are in music or standby mode, you can call the last telephone
number again by pressing the right touch button 3x quickly. You can change the
volume by pressing the touch button 2x shortly on the right headset for volume +
and 2x shortly on the left touch button headset for volume – or change it by the
volume buttons from your device directly.
For Apple users that use SIRI: 3x quickly press on the left multifunction button
headset to activate it.
2.Listen to your music
Make sure that the earbuds are connected to your mobile device. You can now
listen to the music on your playlist. 1x short press the touch button to stop the
music. Press the button again to continue. Long press the right touch button till the
beep is heard for the next song and long press the left touch button till the beep is
heard for the previous song.
3.Power off
Hold down the touch button until the LED light shows red. The Bluetooth device
switches off, even when the earbuds are both connected as a set. If the earbuds
have been removed from your Bluetooth device for more than 5 minutes, they will
switch off automatically. You do not have to worry about empty battery.
Specyfikacje produktu
Marka: | FlinQ |
Kategoria: | Nausznik |
Model: | FQC8156 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z FlinQ FQC8156, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Nausznik FlinQ
24 Września 2024
24 Września 2024
24 Września 2024
Instrukcje Nausznik
Najnowsze instrukcje dla Nausznik
28 Września 2024
28 Września 2024
28 Września 2024
27 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
25 Września 2024
24 Września 2024