Instrukcja obsługi Fibaro KeyFob

Fibaro Zdalne sterowanie KeyFob

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fibaro KeyFob (21 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/21
O P E R A T I N G
M A N U A L
FIBARO KEYFOB
FGKF-601
CONTENTS
#1: Description and features 3
#2: Basic activation 4
#3: Adding/removing the device 5
#4: Operating the device 6
#5: Visual indications 7
#6: Lock Mode 8
#7: Sequences 10
#8: Activating scenes 11
#9: Battery 12
#10: Associations 13
#11: Advanced parameters 15
#12: Specications 19
#13: Regulations 20
v1.1
EN
2
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
The alarm functionality of devices is an additional feature increasing
the comfort level of your home automation system. If you want to
use professional security service, please contact them to determine
what systems can provide a protection of your estate.
Compliance with safety standards:
The device is designed to be used in Z-wave home automation sys-
tems (e.g. FIBARO) and is complaint with IEC/UL/CSA 60950-1. In case
of the integration with another system, e.g. alarm system, it is re-
quired to verify the compliance with additional standards.
!
General information about
the FIBARO System
FIBARO is a wireless smart home automation system, based on the
Z-Wave protocol. All of available devices can be controlled through
a computer (PC or Mac), smartphone or tablet. Z-Wave devices are
not only receivers, but can also repeat the signal, increasing the
Z-Wave network’s range. It gives advantage over traditional wireless
systems that require direct link between transmitter and receiver, as
a result the construction of the building could aect network’s range
negatively.
Every Z-Wave network has its unique identication number (home
ID). Multiple independent networks can exist in the building without
interfering. Transmission security of FIBARO System is comparable to
wired systems.
Z-Wave technology is the leading solution in smart home automation.
There is a wide range of Z-Wave devices that are mutually
compatible, independently of manufacturer. It gives the system the
ability to evolve and expand over time. For more information visit
www.baro.com.
3
DESCRIPTION AND FEATURES
Main features of FIBARO KeyFob:
• Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports Z-Wave network Security Mode with AES-128
encryption,
• Battery powered,
• Completely wireless,
• Pocket size,
• Equipped with 6 easily recognizable buttons,
• 30 dierent actions, single/double/triple click, hold for each
button and sequences,
• Easy to operate menu,
• Actions are conrmed by the built-in LED diode.
FIBARO KeyFob is a Z-Wave Plus compatible, battery-powered,
compact remote control.
Six buttons allow you to control other devices through the Z-Wave
network and run various scenes dened in FIBARO System.
Congure actions for one, two, three clicks, holding the button and
button sequences to suit all your needs.
Built-in locking system will ensure that unauthorized person will not
take control of your home.
#1: Description and features
FIBARO KeyFob is a fully
compatible Z-Wave PLUS device.
NOTE
This device may be
used with all de-
vices certied with
the Z-Wave Plus cer-
ticate and should be
compatible with such
devices produced by
other manufacturers.
i
NOTE
Z-Wave Controller
must support Z-Wave
Security Mode in
order to fully utilize the
product.
i

Specyfikacje produktu

Marka: Fibaro
Kategoria: Zdalne sterowanie
Model: KeyFob

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fibaro KeyFob, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zdalne sterowanie Fibaro

Fibaro

Fibaro KeyFob Instrukcja

14 Września 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Neewer

Neewer RT112 Instrukcja

9 Października 2024
Neewer

Neewer RT113 Instrukcja

9 Października 2024
Zalman

Zalman ZM-VE350 Instrukcja

9 Października 2024
Canon

Canon BG-R20 Instrukcja

9 Października 2024
Canon

Canon BG-R20EP Instrukcja

9 Października 2024
Mosconi

Mosconi DSP6T8 Instrukcja

8 Października 2024
Mosconi

Mosconi RC MINI Instrukcja

8 Października 2024
Ridem

Ridem CRC UNB Instrukcja

8 Października 2024
Ridem

Ridem CRC UNW Instrukcja

8 Października 2024
ORNO

ORNO OR-GB-458 Instrukcja

8 Października 2024