Instrukcja obsługi Ferm FKS-180

Ferm Maszyna do piłowania FKS-180

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ferm FKS-180 (6 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0303-18
Ferm Circular Saw
FKS-180
USER’S MANUAL
Art.nr. 726800
Screwfix art.nr 15770
UK Subject to change
Document Ref:
FKS-180/15770/PMR9/Issue 1/Mar 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
Ferm 11
EXPLODED VIEW
FERM CIRCULAR SAW FKS-180
USERS MANUAL
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
1 Circular saw
1 Box wrench 13 mm
1 Saw blade Ø 180 mm
1 Parallel stop
Check first whether or not the delivery has been dama-
ged by transport and/or whether all the parts are pre-
sent.
PRODUCT INFORMATION
1. Handle
2. Spindle lock
3. On/off switch
4. Depth of cut adjusting knob
5. Mains lead
6. Riving knife
7. Blade guard
8. Hexagonal bolt
9. Shoe
10. Flange
11. Saw Blade
12. Parallel stop
13. Parallel guide adjusting knob
14. Cutting angle adjustingknob
SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance with
the instructions to make sure it functions properly. Keep this
manual and the enclosed documentation with the machine.
Ferm products are manufactured to high quality standards,
they are safe and fit for purpose at time of sale, but all tools
can be dangerous if the correct precautions are not taken.
Always follow these instructions, do not carry out the ope-
ration until you are sure you can do so in safety. Remember
to consider the work environment for safe operation as well
as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the lens breaks. A suitable dust
mask should be worn if cutting, drilling or sanding is
dusty, in particular chipboard or MDF. Approved safety
footwear and headgear should worn as appropriate, for
example on building works or when heavy weights are
involved. Wear suitable gloves and apron to protect
against sparks/debris. Wear earplugs or ear defenders.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair
Stay alert
Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or pre-
scription/ non-prescription drugs.
4 8 10 3 1 2 14
5 6 7 11 9 12 13
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1200 W
No load speed | 4100/min
Saw blade dimensions | 180x1.8x
| 20 mm
Number of teeths | Z18
Max. cutting depth | 62 mm
Weight | 4.72 kg
Lpa (sound pressure level) | 95.4 dB(A)
Lwa (sound power level) | 108.4 dB(A)
Vibration value | ≤2.204 m/s2
2Ferm
10 Ferm
OPERATIONAL SAFETY
Warning! Never use the machine for sawing
asbestos. If asbestos is discovered or suspected,
contact your local council for advice.
Concentrate
Routine and repetition can lead to mistakes. Remember
that a slight lack of concentration can result in serious
injuries in a split second.
Keep work area clean
Cluttered areas and benches invite injuries.
Consider the work environment
Do not expose power tools to rain or use them in damp
or wet locations. Keep work area well lit. Do not use
power tools in the presence of flammable liquids, vap-
ours or gases.
Guard against electric shock
This unit contains dangerous voltages. Use a RCD (resi-
dual current device) to provide protection against elec-
trical shock. Prevent body contact with grounded sur-
faces (e.g. pipes, radiator, ranges or refrigerators).
Keep children and pets away
Do not let children or pets come into contact with the
tool, extension cable or work area.
Do not force the tool
It will work better and safer at the rate for which it was
intended.
Use the right tool
Do not force small tools or attachments to do the job of a
heavy-duty tool. Do not use tools for purposes for which
they were not intended; for example do not use a circular
saw for cutting trees or logs.
Do not abuse cable
Never carry the tool by the cable or pull it to disconnect
it from the power socket. Keep the cable away from heat,
oil and sharp edges. Do not touch the metal plug pins
when connecting or removing the plug.
Secure Work
Use clamps or a vice to hold work. It is safer than using
your hand and it frees both hands to operate the tool. Be
aware that this saw is a powerful machine; you must use
two hands to control it.
Do not over-reach
Keep a proper footing and balance at all times.
Disconnect tools from power supply
When not in use, before servicing and when changing
accessories such as blades, bits and cutters. Always
switch off and unplug the saw from the power
supply before making adjustments or changing
blades.
Remove adjusting keys and wrenches
Ensure that they are removed from the tool before swit-
ching on.
Avoid unintentional starting
Do not carry plugged in tools with your finger on the
switch. Check that the switch is off before plugging in to
socket.
Outdoor use extension cables
When the tool is used outdoors use only an extension
cable intended for outdoor use and marked accordingly.
Use a RCD (residual current device) to provide protec-
tion against electrical shock. Do not use in rain or damp
conditions.
Connect a dust extraction device
Whenever there are facilities for fitting a dust or fume
extraction system, make sure it is connected and used.
Use recommended accessories
The use of any other accessory or attachment other than
recommended in the instructions or catalogue may pre-
sent a risk of personal injury. Use extension cables suita-
ble for the power input of the saw (minimum cable size
1.5mm2). When using a cable reel unwind the cable fully.
Ferm 3
SPARE PARTS LIST FKS-180
REF NR DESCRIPTION FERM NR
8/9/10 CARBON BRUSH (SET) 700000
11 CARBON BRUSH CAP 700001
16 STATOR 700002
22 AUXILIARY HANDLE 700003
24 SWITCH 700004
27 ROTOR 700005
37 GEAR 700006
38 FLANGE (OUTSIDE) 700007
42 SPLITTER 700008
43 SPRING 700015
44 SAW BLADE PROTECTION COVER 700009
45 HARD METAL SAW BLADE Ø 180 MM 310310
46 FLANGE (INSIDE) 700010
47 LEFT BOLT FOR SAW BLADE 700011
50 SOCKET SPANNER 700012
55 PARALLEL GUIDE 700013
61 GUIDE PLATE 700014

Specyfikacje produktu

Marka: Ferm
Kategoria: Maszyna do piłowania
Model: FKS-180

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ferm FKS-180, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Ferm

Ferm

Ferm FKS-165 Instrukcja

14 Października 2024
Ferm

Ferm CSM1042P Instrukcja

14 Września 2024
Ferm

Ferm TSM1033 Instrukcja

9 Września 2024
Ferm

Ferm RSM1015 Instrukcja

5 Września 2024
Ferm

Ferm CSM1034 Instrukcja

4 Września 2024
Ferm

Ferm FKS-210L Instrukcja

2 Września 2024
Ferm

Ferm FZT-315 Instrukcja

2 Września 2024
Ferm

Ferm FKS-180 Instrukcja

2 Września 2024
Ferm

Ferm RSM1007 Instrukcja

30 Sierpnia 2024
Ferm

Ferm TCM1010 Instrukcja

30 Sierpnia 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Alpina

Alpina APR 26 Instrukcja

22 Marca 2025
Gamma

Gamma HCZ2-85 Instrukcja

11 Marca 2025
Baumr-AG

Baumr-AG SW1 Instrukcja

10 Marca 2025
Stiga

Stiga PR 100e Instrukcja

9 Marca 2025
Bosch

Bosch EasyChain 18V-15-7 Instrukcja

27 Lutego 2025
Worx

Worx Nitro WX501 Instrukcja

26 Lutego 2025
DeWalt

DeWalt DCS383 Instrukcja

12 Lutego 2025
EGO

EGO PSX2510 Instrukcja

6 Lutego 2025
Hilti

Hilti WSR 1400-PE Instrukcja

4 Lutego 2025
Husqvarna

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025