Instrukcja obsługi Ferm ATM1040

Ferm pistolet do malowania ATM1040

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ferm ATM1040 (24 stron) w kategorii pistolet do malowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

www.ferm.com

Original instructions 02

Übersetzung der Originalbetriebsanleitung 04

Vertaling van de oorspronkelijke gebruiksaanwijzing 06

Traduction de la notice originale 08

Tłumaczenie instrukcji oryginalnej 10

Tłumaczenie instrukcji oryginalne 12

Originalios instrukcijos vertimas 14

Instrukciju tulkojums no oriģinālvalodas 16

Algupärase kasutusjuhendi tõlge 18

копија на оригиналот инструкции 20

PAINT SPRAY GUN

Read the safety and operating

instructions of the air tool and the

compressor before using the appliance.

Contents

1. Machine data

2. Safety instructions

3. Use

4. Maintenance

1. MACHINE DATA

Technical specifications

Operating pressure 4.5 - 6 bar

Nozzle diameter 1.5 mm

Maximum nozzle flow rate 6.5 cfm

Container capacity 750 cc

Weight 0.65 kg

2. SAFETY INSTRUCTIONS

Explanation of symbols

In this manual and/or on the machine the

following symbols are used:

Wear protective gloves

Use a spray-mask during spraying

Wear eye protection

Safety instructions

Always read the user manual of the

compressor and of the objects and/or

materials you use.

• Avoidtoohighpressure

• Neverbloworsprayindirectionofyourselfor

others; this could cause serious injury.

• Keepbystandersandpetsaway

• Childrenandanimalsshouldbekeptfaraway

fromtheareaofoperationofthemachine.

• Ifyouusethecompressortospraypaint:

 a) Donotworkinenclosedspacesornear

nakedflames.

 b) Makesurethattheenvironmentinwhich

youwillbeworkinghasdedicated

  ventilation.

c) Protect your nose and mouth with a

dedicatedmask

• Ifthecompressorisnolongerinuse,always

taketheplugoutoftheplugsocket.

• Alwaysmakesurethatcompressed-air

hosesareusedforcompressedairandwhich

arecharacterisedbyamaximumpressure

adjustedtothatofthecompressor.Donottry

torepairthehoseifitisdamaged.

3. USE

Onlyusethecompressorwithaccessoryina

goodventilatedarea.

• ConnectthePUhosebetweencompressor

and accessory

• Slidethehose-couplerontheaccessoryuntil

thecouplerclicks.Nowthehoseisconnected

correctly.

• Toreleasethecoupler,pulltheoutsidering

backwards.

Use paint spray gun

Paintandsolventsareveryflammable.Therefore

checkthefollowing:

• Onlysprayingoodventilatedareas

• Useaspray-maskduringspraying

• Avoidopenfireandsmokingduringspraying

• Donotsprayinanareawithaburningstove

• Neverspraywithfuelofotherflammable

products

• Wearsafetygoggles

Toobtainthebestresults,itisimportantthatyou

preparethesurfacetobesprayedandthinthe

painttothecorrectviscosity,beforeyouoperate

yourspraygun.Alwaysensurethatthesurfaces

tobesprayedarefreefromdust,dirtandgrease.

Makesurethatyouhavemaskedtheareasthat

shouldnotbesprayed,usingagoodquality

maskingtape.Thepaintorfluidtobesprayed

shouldbethoroughlymixedandfreefromlumps

orotherparticles.Manysubstancescanbe

sprayedwithyourspraygun,butalwayscheck

the manufacturers recommendations before

purchasingyourpaint.

Toobtainthebestresults,keepyourspraygun

levelandparalleltothesurfaceatalltimes.

Keepthenozzle25-30cmfromthesurfaceand

sprayevenlyfromsidetosideorupanddown.Do

notsprayatanangleasthiswillleadtopaintruns

onthesurface.Usesmoothandevenstrokes.

Itisessentialthatthesprayguniscleaned

thoroughlyaftereveryuse.Failuretocleanitwill

almostcertainlyresultinblockagesanditmay

notoperatewhenyounextcometouseit!The

guaranteedoesnotcovercleaningasprayerthat

hasnotbeenproperlycleanedbytheuser.

4. MAINTENANCE

Trouble shooting

• Spraygundoesnotspray/blowgundoes

notblow.

• Checkthevalve,cylinderandneedleofthe

nozzleonblockage

• Checktheairhoseonleakage

• Checktheairpressure

• “OrangeSkin”excessivefogging.

• Incorrectsolventisused

 • Usecorrectsolvent.

• Sprayguntoofarfromthesurface.

 • Holdspraygunclosertotheobject.

• Painttoothick

 • Thinthepaint

Faults

Shouldafaultoccur,e.g.afterwearofapart,

pleasecontacttheserviceaddressonthe

warranty card.

ENVIRONMENT

Topreventdamageduringtransport,the

applianceisdeliveredinasolidpackagingwhich

consistslargelyofreusablematerial.Therefore

pleasemakeuseofoptionsforrecyclingthe

packaging.

GUARANTEE

Fortheconditionsofguarantee,pleasereferto

theseparatelyprovidedguaranteecard.

Specyfikacje produktu

Marka:	Ferm
Kategoria:	pistolet do malowania
Model:	ATM1040

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ferm ATM1040, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pistolet do malowania Ferm

Ferm ATM1039 Instrukcja

4 Lipca 2024

Ferm ATM1040 Instrukcja

2 Lipca 2024

Instrukcje pistolet do malowania

Najnowsze instrukcje dla pistolet do malowania

MSW -PCS-50 Instrukcja

15 Października 2024

MSW -RPS-100 Instrukcja

15 Października 2024

Abac G-542F Instrukcja

8 Października 2024

Abac G-540F Instrukcja

8 Października 2024

Abac G-550F Instrukcja

8 Października 2024

Abac G-551A Instrukcja

8 Października 2024

Wagner SteamForce Speed Pro Instrukcja

7 Października 2024

Worx WX020.9 Instrukcja

4 Października 2024

Aerotec Mini HVLP Instrukcja

4 Października 2024

Einhell TC-SY 400 P Instrukcja

4 Października 2024