Instrukcja obsługi Fenton 178.423 - LIVE102
Fenton
System audio
178.423 - LIVE102
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fenton 178.423 - LIVE102 (16 stron) w kategorii System audio. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
Ref. nr.: 178.423
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.1
2
ENGLISH
Congratulations to the purchase of this Fenton product. Please read this manual thoroughly prior to using the unit in order to
benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the fixture on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic field. Keep this unit at least 60cm away from
computer or TV.
- If this unit have a built-in lead-acid rechargeable battery.
Please recharge the battery every 3 months if you are
not going to use the unit for a long period of time. Or the
battery may be damaged.
- If the battery is damaged please replace with same
specifications battery. And dispose the damaged battery
environment friendly.
- If the unit has fallen, always have it checked by a
qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
CONTROL ELEMENTS
1. Microphone Input 1
6.3mm (1/4”) jack for connecting microphone.
2. Microphone Input 2
6.3mm (1/4”) jack for connecting microphone.
3. Echo control
Adjust the echo effect of the microphone.
4. Bass control
Adjust low tone control.
5. Treble control
Adjust high tone control.
6. SD Input
Connect your SD/MMC devices to this slot to play music
with MP3-format.
7. USB Input
Connect your USB devices to this slot to play music with
MP3-format.
8. Microphone Volume
Turn to adjust the microphone volume.
9. LED ON/OFF
ON/OFF Switch of the speaker LED lighting.
10. Repeat
Press the button to choose the repeat one or all songs. Press “REPEAT” button above
3 seconds to restore factory. settings.
11. Previous
Press shortly Previous song or press above 3 seconds for fast backward.
12. Next
Press shortly for the next song or press above 3 seconds for fast forward.
13. Play/Pause
For switching between play and pause.
14. Mode
Press shortly to skip to BT/LINE IN/USB/SD mode.
15. Volume
Turn to adjust the “master volume” (output level) of the soundbox.
16. Line Input
RCA jack in- and output for connecting audio units with line level output (e.g. mixer, CD
player, tape recorder).
17. Power ON/OFF
CONNECTING WITH BT-DEVICE
1. Activate the BT-function on your device (Mobile phone, tablet etc.) which you want to play the
music. See the operating instructions for that device.
2. Press the “MODE” button and activate BT-function of soundbox.
3. Select “LIVE102” on your BT-device and make the BT-connection
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10meter without any barrier.
Specyfikacje produktu
| Marka: | Fenton |
| Kategoria: | System audio |
| Model: | 178.423 - LIVE102 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Fenton 178.423 - LIVE102, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje System audio Fenton
22 Września 2024
2 Września 2024
2 Września 2024
17 Sierpnia 2024
16 Sierpnia 2024
16 Sierpnia 2024
Instrukcje System audio
- System audio Sony
- System audio Yamaha
- System audio Samsung
- System audio AEG
- System audio Pioneer
- System audio Philips
- System audio Technics
- System audio JBL
- System audio Onkyo
- System audio Scott
- System audio Bose
- System audio Muse
- System audio Nedis
- System audio Medion
- System audio Tangent
- System audio Lenco
- System audio Adler
- System audio Marquant
- System audio Toshiba
- System audio Terris
- System audio Teac
- System audio Dual
- System audio Grundig
- System audio Soundmaster
- System audio Kenwood
- System audio Polk
- System audio JVC
- System audio TechniSat
- System audio Auna
- System audio OneConcept
- System audio Pure
- System audio Fusion
- System audio Zoom
- System audio Samson
- System audio Revox
- System audio Vonyx
- System audio Naim
- System audio ION
- System audio NAD
- System audio Harman Kardon
- System audio Sonoro
- System audio Aiwa
- System audio AKAI
- System audio Teufel
- System audio Telefunken
- System audio Omnitronic
- System audio Bluesound
- System audio Sangean
- System audio Arcam
- System audio Elta
- System audio Advance Acoustic
- System audio Odys
- System audio Power Dynamics
- System audio Nextbase
- System audio HQ Power
- System audio Tascam
- System audio Moneual
- System audio Reflexion
- System audio REVO
- System audio Proline
- System audio Argon
- System audio AquaSound
- System audio Tevion
- System audio GPO
- System audio Sitecom
- System audio Telestar
- System audio Sonos
- System audio Tokai
- System audio Ricatech
- System audio Boston Acoustics
- System audio Sweex
- System audio Pure Acoustics
- System audio Peaq
- System audio Roadstar
- System audio Pinnacle
- System audio Dnt
- System audio Karcher Audio
- System audio Skytec
- System audio Numan
- System audio Iluv
- System audio Lynx
- System audio Xoro
- System audio Hiteker
- System audio Tamashi
- System audio Quadral
- System audio JGC
- System audio Scansonic
- System audio Tivoli
- System audio Roku
- System audio Visual Land
- System audio Axxion
- System audio Ebench
- System audio Bang Olufsen
- System audio KRK Systems
- System audio Jarre
- System audio Belson
- System audio S-Digital
- System audio Monitor
Najnowsze instrukcje dla System audio
15 Stycznia 2025
15 Stycznia 2025
14 Stycznia 2025
14 Stycznia 2025
11 Stycznia 2025
5 Października 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024