Instrukcja obsługi Fantini Cosmi S71


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fantini Cosmi S71 (2 stron) w kategorii detektor gazu. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
8
S71-S72
Gas detection sensors for control units P30A
Combustible gas detection sensors to be used with the electronic control units P30A. The sensors are available
in 2 versions: S71 for methane gas and city gas, S72 for LPG.
INSTALLATION
Wall mounting.
Detection sensors should be fixed on the wall at a distance of approximately 2 meters from the gas using device in such position in
order to allow natural air circulation:
S71 for specific light gases (methane gas, city gas), this sensor has to be installed at a high level approximately 30-40 cm from
the ceiling.
S72 for heavy gases (cylinder liquid gas LPG), this sensor has to be installed to a low level approximately 30-40 cm above the floor.
Avoid installing the sensors:
behind barriers that hinder the air natural circulation in the environment.
near vents (keeping a minimum distance of 2 meters).
away from steam, smoke and other fumes.
Remove the cover by unscrewing the four front screws.
Install the base on the wall using for the cable input the appropriate cable gland.
76
128
65
Dimensions (mm)
Gas type Operating ambient
temperature
Protection
degree
S71 Methane gas, or other light gases - 10 ÷ 50 °C IP54
S72 LPG gas (cylinder liquid gas) or other heavy gases - 10 ÷ 50 °C IP54
B
C
A


Specyfikacje produktu

Marka: Fantini Cosmi
Kategoria: detektor gazu
Model: S71

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fantini Cosmi S71, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje detektor gazu Fantini Cosmi

Instrukcje detektor gazu

Najnowsze instrukcje dla detektor gazu