Instrukcja obsługi Fantini Cosmi EV90

Fantini Cosmi kocioł centralnego ogrzewania EV90

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Fantini Cosmi EV90 (20 stron) w kategorii kocioł centralnego ogrzewania. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

EXPANSION

MODULES

Slave

EV90

EV91A

EV91C

EV92

FANBUS

EV90 - MASTER

DIGITAL CONTROL UNIT FOR COMPLEX

HEATING AND TECHNOLOGICAL PLANTS

USE

The EV90 control unit is used in particularly complex

plants where several different devices are required to

meet heat regulation requirements.

The system features a master device (EV90) and

one or more slave modules connected to the master

through a communication Bus called FANBUS.

OPERATION

The EV90 acts as central control unit. The para-

meters of the slave modules connected to the FAN-

BUS can be displayed or modied through the EV90

display and keyboard. A probe measures the outside

temperature value which is sent through the FANBUS

to all relevant control units thereby avoiding pointless

duplicates.

Date and time, including daylight-saving time, may be

directly set on the front panel of the control unit and

used by all devices connected to the BUS.

One modem (analogue or GSM) enables to manage

and to modify remotely the parameters of the Master

EV90 as well as the parameters of all other modules.

Any alarm generated by a slave module is rst tran-

smitted to the master EV90 and then to a remote sta-

tion or to an enabled mobile phone.

The EV90 also controls boiler (1 or 2 stages) regula-

tion in order to keep boiler temperature high enough

to guarantee heat to all connected devices.

TO SELECT THE REQUIRED LANGUAGE

During installation the user can select the language

required to display the Menu information. With the

control unit off, keep the key + (see the gure below)

pressed and then switch the control unit on. When

the icon “CHOOSE LANGUAGE” is displayed release

the key + and scroll the available languages using the

keys + and -. Find the required language and then

press key > to select it.

Menu info will be then displayed in the chosen lan-

guage.

DESIGN CHARACTERISTICS

DIN 144x144 container, quick coupling control unit

on base with FASTON connections, transparent

protection cover. Wall, ush or rear panel mounting

available. All parameters are displayed on 4-line/16

characters alphanumeric display. To facilitate reading

under poor light conditions, press any key to light up

the display that will go off automatically after about 60

seconds if no other key is pressed (no operation).

Two LEDs, Tx and

Rx indicate com-

munication on the

FUNBUS

4-line 16-characters alpha-

numeric display

Two LEDs indicate

the status of the two

output relays

Use keys “UP” and

“DOWN” to move

over a page and to

go from one para-

meter to another

Use keys “<” and “>”

to go from one page to

another

Use keys “+” and “-” to

change parameters

CHOOSE LANGUAGE:

ENGLISH

FANBUS

Up to 15 different types of controllers can be con-

nected to the FANBUS, with max. 8 controllers of the

same type (i.e.: 15 x 8 = max 120 controllers).

The FANBUS connection between master EV90 and

slave is performed with a simple low voltage non-

polarized twin cable (the two wires can therefore be

inverted with each other without causing malfunc-

tion). Slaves shall be connected to the BUS through

parallel connection.

CONTROL UNIT ADDRESS

Each control unit is identied by two digits that deter-

mine its address. The rst digit represents the model

and cannot be modied. The second one may be set

through jumpers on each slave terminal board.

Example:

EV91A rst digit: 1

EV91C rst digit: 2

EV92 rst digit: 3

If only one control unit per type is present on the BUS,

no intervention is required.

Since the second digit is automatically set =0, control

units shall have addresses 10, 20 and 30 respec-

tively.

Should three EV91A control units be required on the

same BUS then, set address 1 on the second control

unit and address 2 on the third one.

The following situation is therefore obtained:

1 - EV91A address 10 (no jumper = address 0)

2 - EV91A address 11 (set address 1)

3 - EV91A address 12 (set address 2)

1 - EV91C address 20 (no jumper = address 0)

1 - EV92 address 30 (no jumper = address 0)

Every control unit shall therefore have an address

that identies it unambiguously.

N.B. In order to communicate properly with the re-

quired device, every remote control command must

be preceded by two digits that represents the address

of the device.

Specyfikacje produktu

Marka:	Fantini Cosmi
Kategoria:	kocioł centralnego ogrzewania
Model:	EV90

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Fantini Cosmi EV90, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje kocioł centralnego ogrzewania Fantini Cosmi

Fantini Cosmi EV85 Instrukcja

24 Września 2024

Fantini Cosmi EV91C Instrukcja

5 Września 2024

Fantini Cosmi EV90 Instrukcja

1 Września 2024

Fantini Cosmi EV87 Instrukcja

31 Sierpnia 2024

Fantini Cosmi EV92 Instrukcja

25 Sierpnia 2024

Fantini Cosmi EV91D Instrukcja

19 Sierpnia 2024

Fantini Cosmi EV91A Instrukcja

14 Sierpnia 2024

Fantini Cosmi EV91B Instrukcja

13 Sierpnia 2024

Fantini Cosmi EV80 Instrukcja

13 Sierpnia 2024

Fantini Cosmi EV83 Instrukcja

4 Lipca 2024

Instrukcje kocioł centralnego ogrzewania

Najnowsze instrukcje dla kocioł centralnego ogrzewania

ACV E-Tech P 201 Instrukcja

15 Stycznia 2025

Buderus Logamax plus GB192 i Instrukcja

13 Stycznia 2025

Intergas HRE 24-18 Instrukcja

13 Stycznia 2025

Intergas HRE 36-30 Instrukcja

13 Stycznia 2025

Intergas H22VRTW Instrukcja

13 Stycznia 2025

Intergas HRE 28-24 Instrukcja

13 Stycznia 2025

Baxi Neta-tec Combi 28 GA Instrukcja

11 Stycznia 2025

Baxi Platinum Compact Instrukcja

28 Grudnia 2024

Baxi Platinum iPlus Instrukcja

28 Grudnia 2024

Kospel EKD.M3 Instrukcja

27 Grudnia 2024