Instrukcja obsługi Extech RPM33


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech RPM33 (12 stron) w kategorii Drogomierz. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
USER MANUAL
Model RPM33
Laser Photo / Contact Tachometer
Additional User Manual translations available at www.extech.com
2 RPM33- -US_V1.5en 6/22
Introduction
Congratulations on your purchase of the Extech , Model Laser Photo / Contact Tachometer RPM33.
The RPM33 digital tachometer offers fast and accurate measurements of the following:
Rotational speed (RPM)
Total Revolutions (REV)
Frequency (Hz)
Surface Speed (meters per minute, inches per minute, feet per minute, yards per minute)
Length (meters, inches, feet, and yards)
Features include wide measurement range, high resolution, easy rea- -to d backlit LCD, MAX- -MIN
AVG memory Record/Recall readings, and Laser sighting.,
This device is shipped fully tested and calibrated and, with proper use, will provide years of reliable
service. Please visit our website (www.extech.com) to check for the latest version of this User
Manual.
3 RPM33- -US_V1.5en 6/22
Description
Meter Description
1. Surface (circumference) wheel accessory is shown
connected to shaft (rubber cone and concave
accessories are also supplied)
2. Adaptor shaft
3. Removable collar (photo sensor and laser source are
located at the top of the meter under this collar)
4. MEM (Memory) button
5. Battery compartment (rear)
6. MEASURE button
7. MODE button
8. LCD Display
Push-button Description
MEM (Memory) button: Used to Record/Recall readings
MEASURE button: Press and hold to take readings. The Laser pointer will switch on for Photo
tachometer measurements when pressed
MODE button: Press momentarily to switch measurement units. Press and hold for 2 seconds
to switch between Surface Speed and Length measurement modes


Specyfikacje produktu

Marka: Extech
Kategoria: Drogomierz
Model: RPM33

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Extech RPM33, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą