Instrukcja obsługi Extech LT505
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech LT505 (8 stron) w kategorii Detector. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
USER MANUAL
LUX/FC Meter Light
Model 505 LT
Addional User Manual Translaons available at www.extech.com
LT505 en 1 - -GB_V1. 1 /18
2
Introducon
Thank you for selecng the Extech Model LT5 LUX/FC Light Meter The LT505 measures light 05 .
from uorescent, metal halide, high-pressure sodium and incandescent sources in lux and foot-
candles. This device is shipped fully tested and calibrated and, with proper use, will provide years
of reliable service. Please visit our website (www.extech.com) to check for the latest version and
translaons of this User Manual, Product Updates, Product Registraon, and Customer Support.
Features
Measure intensity of light (illuminance) in lux or foot-candles
Light sensor with cosine correcon
Low baery indicator
Data hold
Auto-ranging
Auto Power OFF (APO)
Light weight, compact, design
Safety
Please read the enre User Manual before operang this device. Use the meter only as specied
and do not aempt to service or open the meter housing.
Do not use the meter in the presence of explosive gas or vapor
Do not expose the meter to extremes in temperature or to high humidity
Please dispose of baeries and meter responsibly and in accordance with all applicable
laws and regulaons
Do not allow children to handle the meter or the protecve cover
Meter and LCD Descripon
1. Light Sensor (protecve sensor cover not shown)
2. LCD
3. LUX- buon FC
4. CAL-ZERO buon
5. Power buon
6. Data Hold buon
7. MAX-MIN Record buon
Note: Baery compartment and Tripod mount on rear of
meter
LT505 en 1 - -GB_V1. 1 /18
3
1. Baery status
2. Auto Power OFF (APO)
3. Data Hold
4. Maximum reading
5. Average reading
6. Minimum reading
7. Measurement
8. Units of measure
9. Calibraon (ZERO)
Operaon
Meter Power
Power the meter by long pressing the buon. The meter will begin displaying light intensity
readings. If the LCD does not switch on, check the baeries located in the rear baery
compartment. Short press power buon to turn OFF the meter.
Zero Calibrate the Sensor
1. Place the protecve cover over the sensor and press the buon to power on the meter.
2. If the display does not read ‘0.0’ short press the buon.
3. The CAL icon will appear in the secondary display.
4. The CAL icon will switch OFF when the calibraon has been completed.
5. If the protecve cap is not covering the sensor when the buon is pressed, the LCD
display will read “CAP”. In this case, please cover the sensor with the cap and restart this
procedure.
6. It is recommended that the meter be switched o and then on again when repeang the
zero calibraon funcon.
Taking Measurements
Remove the sensor cover and aim the sensor toward the light source. View the measurement on
the meter’s display.
Selecng the Unit of Measure
Press the buon to toggle the units between Lux and Foot-candles. The units will indicate in
the display.
Data Hold
Short press the buon to freeze or unfreeze a reading on the display.
Specyfikacje produktu
Marka: | Extech |
Kategoria: | Detector |
Model: | LT505 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Extech LT505, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Detector Extech
28 Sierpnia 2024
Instrukcje Detector
- Detector Voltcraft
- Detector Bosch
- Detector Gigaset
- Detector Hikvision
- Detector Nedis
- Detector Nexa
- Detector Black & Decker
- Detector Silverline
- Detector Honeywell
- Detector Mercury
- Detector Testo
- Detector ORNO
- Detector DSC
- Detector Cobra
- Detector Vimar
- Detector Dahua Technology
- Detector Velleman
- Detector Pyle
- Detector Ferrex
- Detector Abus
- Detector Olympia
- Detector Optex
- Detector ZKTeco
- Detector Denver
- Detector Garrett
- Detector Busch-Jaeger
- Detector Powerfix
- Detector X-Sense
- Detector Smartwares
- Detector Inovonics
- Detector Amprobe
- Detector Sun Joe
- Detector Ei Electronics
- Detector Flir
- Detector Royal Sovereign
- Detector Safescan
- Detector FireAngel
- Detector Popp
- Detector Escort
- Detector Guardian Avionics
- Detector Benewake
Najnowsze instrukcje dla Detector
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024
16 Września 2024
15 Września 2024
14 Września 2024