Instrukcja obsługi Extech 382276


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Extech 382276 (14 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/14
Manual User
Model 382275 (120V)
382276 4 (2 0V)
Single Output Laboratory Grade
Switching DC Power Supply
2 382275_382276- - .en US_V4 9 5/22
Introduction
Congratulations on your purchase of th Single Output e Extech 382275 (120V) or 382276 (240V)
Laboratory Grade DC Power Supply.
The dual action (coarse/fine tune) rotary encoder allows for quick and precise voltage and
current level adjustments. Setting, changing, and checking the current limit level can be
performed easily without sparking the output poles.
T - : he remote control feature allows the user to remotely perform the following tasks
O utput power ON/OFF
Voltage and Level Adjustments Current
The three -user presets facilitate quick access to frequently used voltage and current settings.
This power supply is shipped fully tested and calibrated and, with proper use, will provide years
of reliable service.
Safety
WARNING
Do not use this power supply with electric motors or for charging purposes on
electroplating equipment or similar devices. Return EMF and voltage transients generated
by electric motors can damage this power supply. This power supply was designed for use
on electronic equipment only and not intended for use on electrical equipment of any
kind.
Do not use this power supply near water.
Do not operate or touch this power supply with wet hands.
Do not open the casing of the power supply when it is connected to AC power.
Refer all servicing to qualified service personnel only.
Before replacing the fuse, identify and fix any problems.
Replace the fuse with a fuse of the specified type . and rating
CAUTION
Use a grounded 3 pin AC source.
This unit is intended for indoor use only.
Do not operate or place this unit in sunlight or in a humid locationdirect
Avoid environments where dust or dirt can enter the power supply casing.
Do not place the power supply near a heat source.
Before plugging into local AC mains, check the rating label at the back of the unit for 120V or 240V
operation. The model 382275 can be powered by 12 only. The model 382276 can be powered by 0V
24 0V only.
Do not block the ventilation openings of the unit.
This unit must be used within the specified rating; excessive continuous loading may cause damage to
the power supply.
The gauge size of the cable must be at least 3input power in (0.75 mm) and the total length of power
cable must not exceed 118 in (3m)
3 382275_382276- - .en US_V4 9 5/22
Power Supply Description
1. Power Switch ON/OFF
2. Voltage Display
3. Current Display
4. Constant Voltage Indicator LED
5. Rear Control Indicator LED (Switches ON when in Preset, Remote Control or Set
Mode)
6. Output Voltage Control Knob (Controls both the main and auxiliary output
voltage)
7. Output Current Control Knob (Controls both the main and auxiliary output
current)
8. Positive Auxiliary Output Terminal (Max. 5 Amps)
9. Negative Auxiliary Output Terminal (Max. 5 Amps)
10. Constant Current Indicator LED


Specyfikacje produktu

Marka: Extech
Kategoria: Niesklasyfikowane
Model: 382276

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Extech 382276, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Extech

Extech

Extech 380580 Instrukcja

8 Stycznia 2025
Extech

Extech 380396 Instrukcja

3 Października 2024
Extech

Extech HDV600 Instrukcja

3 Października 2024
Extech

Extech 380395 Instrukcja

3 Października 2024
Extech

Extech HDV540 Instrukcja

29 Września 2024
Extech

Extech 380260 Instrukcja

29 Września 2024
Extech

Extech CO220 Instrukcja

27 Września 2024
Extech

Extech MO57 Instrukcja

19 Września 2024
Extech

Extech DCP36 Instrukcja

18 Września 2024
Extech

Extech HD750 Instrukcja

13 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane