Instrukcja obsługi Everpure PBS-400

Everpure Filtr wody PBS-400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Everpure PBS-400 (17 stron) w kategorii Filtr wody. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/17
pentair.com
PBS-400 WATER FILTRATION SYSTEM
SISTEMA DE FILTRACIÓN DE AGUA PBS-400
PBS-400 SYSTÈME DE FILTRAGE D’EAU
ENGLISH
2 • EVERPURE PBS-400 Water Filtration System®
Thank you for purchasing an Everpure by Pentair
commercial grade water filtration system for your home.
With your Everpure by Pentair system, you get premium
quality water direct from your tap that’s great-tasting,
healthful and convenient for you and your family.
PRODUCT SPECIFICATIONS
• For Cold Water Use Only
• Temperature Range: 35-100°F (2-38°C)
• Min.-Max. Working Pressure: 10-125 psi (0.7-8.6 bar)
• Service Flow Rate: 2.2 gpm (8.3 Lpm)
• Capacity: 3,000 gallons (11,355 L)
TOOLS REQUIRED FOR INSTALLATION
• Phillips Screwdriver
• Adjustable Wrench
• Tape Measure
• Pencil
BASIC INSTALLATION INSTRUCTIONS
1. Open Carton & Inspect Parts
Installation Parts
Key Description Part No.
1 QL3 Filter Head EV927082
2a EF-1500 Filter Cartridge EV985850
2b EF-3000 Filter Cartridge EV985750
2c EF-6000 Filter Cartridge EV985550
3 2 Locking Washers EV306204
4 2 Screws EV306196
5 3/8-inch MPT x 3/8-inch FTP Elbow EV310852
6 Fitting, 3/8-inch NPT x 3/8-inch Comp EV315121
7 Plumber Tape EV312119
8 Everpure Filter Timer EV314160
9 Braided Hose
3/8-inch Comp x 3/8-inch Comp
EV315229
2. Verify Under-Sink Mounting Location
Measure 20 inches from the base of the cabinet, and mark
the mounting location for the top of the filter head. Make sure
there is adequate space above the head to open and close
the built in shut-off valve and to avoid crimping the water
line tubing. Also, make sure your chosen location offers easy
access for future filter cartridge changes.
DIMENSION Width Mounting
Height Depth
PBS-400 5 inches 20 inches 5 inches
NOTE: The filter head and filter cartridge must be mounted
in the vertical position, with the cartridge hanging
down.
2
20 inches
1
2
6
5
8
7
3
4
9
1
ENGLISH
EVERPURE PBS-400 Water Filtration System • 3
Label
Lug
6JK
L
M
N
O
Q
I
5
BASIC INSTALLATION INSTRUCTIONS
CONTINUED
3. Installing Union Connections
NOTE: Two union connections and a stainless steel braided
hose are included to allow installation to a 3/8” cold
water supply line. A 90 degree plastic elbow fitting is
included to prevent kinking of supply hose.
A. Apply plumber tape to the 3/8” NPT threads on both union
fittings and elbow fitting. Wrap tape in direction of the
threads to assure a tight fit and avoid small leaks.
B. Screw elbow fitting into the inlet port of the filter head.
C. Install union fittings onto filter head and elbow.
D. Securely mount the filter head on the cabinet wall using the
enclosed mounting screws and washers.
4. Connect Inlet Water Supply
E. Locate and close the cold water shut-off valve under your
sink. Open cold water line of faucet to release
water pressure.
F. Unscrew and disconnect the braided tubing from the cold
water supply line.
G. Attach one end of the supplied braided tubing to the top of
the cold water supply line.
H. Attach the other end of the supplied braided tubing to the
inlet connection of the filter head.
5. Connect System to Faucet
I. Attach open end of existing Braided Tubing to Union Fitting
on outlet side (right) of new system. Hand tighten to avoid
damage to fittings.
6. Install And Flush Filter Cartridge
J. Lift handle of the build-in shut off (QC Valve) on the Filter
Head.
K. Hold Head firmly with one hand.
L. Align filter cartridge lug with label on filter Head.
M. Insert filter cartridge—Push upwards.
N. Turn it to the right—About 1⁄4 turn—Until rotation stops.
O. Open cold water valve and check for leaks up to Inlet
Elbow Fitting.
P. Open Water Faucet (not pictured).
Q. Lower the QC Valve Handle to flush water to the sink.
NOTE: Flush new filter cartridge for at least 3 minutes to
remove air and any loose carbon. At first the water
may appear cloudy due to trapped air in the filter and
tubing. If water continues to be cloudy for more than
one week, please contact Pentair Technical Support for
assistance: (800) 279-9404
R. Activate Filter Timer by pinching bubble until you feel
a change in resistance as the Filter timer “pops.”
Within a few seconds, a thin RED line will appear in
the white window showing the Timestrip(R) has been
activated. Peel away backing and adhere to desired
location. When the white window is completely filled
with RED, it is time to replace your product.
E
F
G
H
4
A
B
C
INLET OUTLET
3

Specyfikacje produktu

Marka: Everpure
Kategoria: Filtr wody
Model: PBS-400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Everpure PBS-400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Filtr wody Everpure

Everpure

Everpure H-300 Instrukcja

14 Września 2024
Everpure

Everpure EF-1500 Instrukcja

13 Września 2024
Everpure

Everpure H-54 Instrukcja

9 Września 2024
Everpure

Everpure H-300-NXT Instrukcja

9 Września 2024
Everpure

Everpure EF-6000 Instrukcja

8 Września 2024
Everpure

Everpure PBS-400 Instrukcja

6 Września 2024
Everpure

Everpure EF-3000 Instrukcja

6 Września 2024

Instrukcje Filtr wody

Najnowsze instrukcje dla Filtr wody

JBL

JBL Pro Cristal Compact Plus UV-C Instrukcja

5 Stycznia 2025
LARQ

LARQ Bottle Movement Instrukcja

31 Grudnia 2025
Eden

Eden 521 Instrukcja

30 Grudnia 2025
Laica

Laica C3M Instrukcja

27 Grudnia 2024
Laica

Laica H0M Instrukcja

26 Grudnia 2024
Panasonic

Panasonic TK-CS500 Instrukcja

23 Grudnia 2024
Philips

Philips ADD6830 Instrukcja

20 Grudnia 2024
JANDY

JANDY CS100 Instrukcja

19 Grudnia 2024
JANDY

JANDY CS150 Instrukcja

19 Grudnia 2024
JANDY

JANDY CS250 Instrukcja

19 Grudnia 2024