Instrukcja obsługi EverFocus EPTZ100

EverFocus Kamera monitorująca EPTZ100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EverFocus EPTZ100 (48 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/48

EPTZ 100

Day / Night Speed Dome Camera

INSTALLATION / OPERATION

EPTZ100_ma_en_rev03.doc 2

1 SAFETY WARNINGS

• Do not place the device near to heaters, furnaces, other heat sources or under direct solar irradiation.

• Operate the device only in locations providing the tolerable operating temperature range 0°C~40°C.

• For cleaning, make sure the device is plugged off and only use a damp cloth without acid detergent.

• Install the device only in dry and dustproof surroundings. Protect the device against any liquid’s penetration.

• Avoid the penetration of any artefacts, e.g. through ventilation slots.

• Do not open the device yourself. In case of malfunction, contact your local installer or dealer. Unauthorized opening of the

device will annul the warranty claim!

• Use the device only for purposes described in this manual.

• Operate the device only with the power source indicated in this user manual.

WEEE

ATTENTION! This is a class A product which may cause radio interference in a domestic environment; in this

case, the user may be urged to take adequate measures.

Your EverFocus product is designed and

manufactured with high quality materials and

components which can be recycled and reused.

This symbol means that electrical and electronic

equipment, at their end-of-life, should be

disposed of separately from your household

waste.

Please, dispose of this equipment at your local

community waste collection/recycling centre.

In the European Union there are separate

collection systems for used electrical and

electronic product.

Please, help us to conserve the environment we

live in!

Ihr EverFocus Produkt wurde entwickelt und

hergestellt mit qualitativ hochwertigen Materialien

und Komponenten, die recycelt und wieder

verwendet werden können.

Dieses Symbol bedeutet, dass elektrische und

elektronische Geräte am Ende ihrer

Nutzungsdauer vom Hausmüll getrennt entsorgt

werden sollen.

Bitte entsorgen Sie dieses Gerät bei Ihrer örtlichen

kommunalen Sammelstelle oder im Recycling

Centre.

Helfen Sie uns bitte, die Umwelt zu erhalten, in

der wir leben !

This equipment has been tested and found to comply to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

The information in this manual was current upon publication. The manufacturer reserves the right to revise and improve his products.

Therefore, all specifications are subject to change without prior notice. Misprints reserved.

Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference.

This Product is RoHS compliant.

EPTZ100_ma_en_rev03.doc 3

TABLE OF CONTENTS

1 SAFETY WARNINGS................................................................................................................ 2

2 INTRODUCTION ...................................................................................................................... 5

2.1 Features ............................................................................................................................. 5

2.2 Delivery scope..................................................................................................................... 5

2.3 Optional accessories............................................................................................................ 5

2.4 Specifications ...................................................................................................................... 6

2.5 Dimensions ......................................................................................................................... 8

2.5.1 Dimensions with ceiling mount adapter .......................................................................... 8

2.5.2 Dimensions with recessed ceiling mount adapter ............................................................ 8

2.5.3 Dimension EPTZ 100 with wall mount bracket EPTZ 100 WLM ........................................ 9

2.5.4 Dimensions wall bracket EPTZ 100 WLM....................................................................... 9

2.5.5 Dimension EPTZ 100 with ceiling pendant bracket EPTZ 100 CPM ................................ 10

2.5.6 Dimension ceiling pendant bracket EPTZ 100 CPM....................................................... 10

3 INSTALLATION ...................................................................................................................... 11

3.1 Mechanical........................................................................................................................ 11

3.1.1 Ceiling mount ............................................................................................................ 11

3.1.2 Recessed ceiling mount.............................................................................................. 12

3.1.3 Wall mount ................................................................................................................ 13

3.1.4 Ceiling pendant mount................................................................................................ 14

3.2 Electrical........................................................................................................................... 15

3.2.1 Video........................................................................................................................ 15

3.2.2 Power ....................................................................................................................... 15

3.2.3 RS-485 ..................................................................................................................... 16

3.2.4 Alarm........................................................................................................................ 19

3.3 Communication settings ..................................................................................................... 20

3.3.1 Baud rate and Protocol............................................................................................... 20

3.3.2 RS-485 ID (address) .................................................................................................. 21

3.3.3 RS-485 bus termination.............................................................................................. 23

3.4 Initial Start......................................................................................................................... 23

4 OSD menu setup .................................................................................................................... 23

4.1.1 Operation in Setup Menu............................................................................................ 23

4.1.2 Menu Structure.......................................................................................................... 24

4.1.3 Main menu ................................................................................................................ 26

4.1.4 System info ............................................................................................................... 26

4.1.5 Display...................................................................................................................... 26

4.1.6 Camera..................................................................................................................... 27

4.1.7 Scan......................................................................................................................... 31

4.1.8 Control...................................................................................................................... 35

4.1.9 Privacy Mask............................................................................................................. 36

4.1.10 Alarm........................................................................................................................ 37

4.1.11 Initialize ..................................................................................................................... 37

5 OPERATION WITH EKB 500 KEYBOARD................................................................................ 38

5.1 EKB 500 operation with EverFocus protocol (EVF-2)........................................................... 39

5.1.1 EPTZ 100 setup menu................................................................................................ 40

5.1.2 Preset positions ......................................................................................................... 40

5.1.3 Autopan .................................................................................................................... 40

5.1.4 Preset tours............................................................................................................... 41

5.1.5 Pattern tours.............................................................................................................. 41

5.1.6 Remote switching of EPTZ 100 output relay ................................................................. 41

5.2 EKB 500 Operation with Pelco-D/P Protocol........................................................................ 42

5.2.1 EPTZ 100 setup menu................................................................................................ 42

5.2.2 Preset positions ......................................................................................................... 42

5.2.3 Autopan .................................................................................................................... 43

5.2.4 Preset tours............................................................................................................... 43

5.2.5 Pattern tours.............................................................................................................. 43

Specyfikacje produktu

Marka:	EverFocus
Kategoria:	Kamera monitorująca
Model:	EPTZ100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z EverFocus EPTZ100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kamera monitorująca EverFocus

EverFocus EQ350 Instrukcja

23 Września 2024

EverFocus EZN7221 Instrukcja

22 Września 2024

EverFocus ED200/N-3W Instrukcja

22 Września 2024

EverFocus EHN3261 Instrukcja

22 Września 2024

EverFocus EBD935 Instrukcja

22 Września 2024

EverFocus EQ250A/N Instrukcja

22 Września 2024

EverFocus EBD430 Instrukcja

22 Września 2024

EverFocus EM900FP4 Instrukcja

22 Września 2024

EverFocus EIVP-KBU-IV-V0004 Instrukcja

22 Września 2024

EverFocus EDN468ME Instrukcja

22 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025

Hikvision DS-2CD2163G0-I(S) Instrukcja

12 Stycznia 2025

Hikvision DS-2CD2H83G1-IZS Instrukcja

12 Stycznia 2025

Speco Technologies O5LB1 Instrukcja

12 Stycznia 2025

ZKTeco AntarVis 2.0 Instrukcja

12 Stycznia 2025