Instrukcja obsługi EverFocus EMC700

EverFocus Kamera monitorująca EMC700

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EverFocus EMC700 (2 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

M122-EJ230-0 0 1

HIGH PERFORMANCE

BULLET CAMERA

OP ER AT ION M ANUAL

This marking shown on the product or its literature, indicate that

it should not be disposed with other household wastes at the end

of its working life. To prevent possible harm to the environment or

human health from uncontrolled waste disposal, please separate

this from other types of wastes and recycle it responsibly to promote

the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes

purchased this product, or their local government ofﬁ ce, for details

of where and how they can take item for environmentally safe

recycling.

Business users should contact their supplier and check the terms

and conditions of the purchase contract.

Household users should contact either the retailer where they for

disposal.

CAU T I O N

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER(OR BACK). NO USER.

SERVICING TO QUALIFED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence

of uninsulated "dangerous voltage" within the product's

enclosure that may be of sufﬁ cient mangnitude to constitute

a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of

important operating and maintenance(servicing) instruction in

the literature accompanying the appliance.

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.”

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate

measures.

Any changes or modiﬁ cations in construction of this devies which are not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

CAUTION

1. A regulated DC12V 300mA power supply is recommended for use with this camera for the best picture and the most stable operation.

An unregulated power supply can cause damage to the camera. When unregulated power supply is applied,

product warranty will be out of subject.

2. It is recommended that the camera is used with a monitor that has a CCTV quality 75 video impedance level. If your monitor is switched to high

impedance then please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal componets. Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reﬂ ective light, which may cause smear on the picture and possible damage to the CCD.

5. Do not remove the serial sticker for the warranty service.

These servicing instructions are for use by qualiﬁ ed service personnel only. To reduce the risk of electric shock do not perform any servicing other than

that contained in the operating instructions unless you are qualiﬁ ed to do so.

In USA and Canada, Use Class 2 Power Supply Only.