Instrukcja obsługi EverFocus EKB500

EverFocus Niesklasyfikowane EKB500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EverFocus EKB500 (40 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/40
EKB500
DVR and Telemetry Keyboard
FW 1.5
New operating concept !
EKB500_ma_en_rev1.5_3.doc 2
1 SAFETY WARNINGS
• Do not place the device near to heaters, furnaces, other heat sources or under direct solar irradiation.
• Operate the device only in locations providing the tolerable operating temperature range 0°C~40°C.
• For cleaning, make sure the device is plugged off and only use a damp cloth without acid detergent.
• Install the device only in dry and dustproof surroundings. Protect the device against any liquid’s penetration.
• Avoid the penetration of any artefacts, e.g. through ventilation slots.
• Do not open the device yourself. In case of malfunction, contact your local installer or dealer. Unauthorized opening of
the device will annul the warranty claim!
• Use the device only for purposes described in this manual.
• Operate the device only with the power source indicated in the technical data.
WEEE
ATTENTION! This is a class A product which may cause radio interference in a domestic environment; in this
case, the user may be urged to take adequate measures.
Your EverFocus product is designed and
manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be
disposed of separately from your household
waste.
Please, dispose of this equipment at your local
community waste collection/recycling centre.
In the European Union there are separate
collection systems for used electrical and
electronic product.
Please, help us to conserve the environment we
live in!
Ihr EverFocus Produkt wurde entwickelt und
hergestellt mit qualitativ hochwertigen Materialien
und Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass elektrische und
elektronische Geräte am Ende ihrer
Nutzungsdauer vom Hausmüll getrennt entsorgt
werden sollen.
Bitte entsorgen Sie dieses Gerät bei Ihrer örtlichen
kommunalen Sammelstelle oder im Recycling
Centre.
Helfen Sie uns bitte, die Umwelt zu erhalten, in
der wir leben !
This equipment has been tested and found to comply to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
The information in this manual was current upon publication. The manufacturer reserves the right to revise and improve his products.
Therefore, all specifications are subject to change without prior notice. Misprints reserved.
Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference.
This Product is RoHS compliant.
EKB500_ma_en_rev1.5_3.doc 3
TABLE OF CONTENTS
1 SAFETY WARNINGS...................................................................................................................2
2 INTRODUCTION........................................................................................................................ 5
2.1 FEATURES........................................................................................................................... 5
2.2 Changes from FIRMWARE 1.5 compared to former Versions .................................................... 5
2.3 COMPATIBLE DEVICES .........................................................................................................5
2.4 DELIVERY SCOPE.................................................................................................................6
3 OPERATING ELEMENTS .............................................................................................................7
4 KEYBOARD CONNECTORS..........................................................................................................8
4.1 RS-485 ports .......................................................................................................................8
4.2 RS-232 connector................................................................................................................. 8
4.3 POWER CONNECTOR............................................................................................................8
5 INSTALLATION..........................................................................................................................9
5.1 General RS-485 bus installation ............................................................................................. 9
5.2 EPTZ 500 / 1000 / 3000 / 3500 Speed dome camera connection............................................ 11
5.3 ED-2200, ED-2250, Samsung SCC-641, SCC-643 , SCC-6405 connection................................. 11
5.4 Connection of Pelco-D / -P protocol-compatible devices......................................................... 12
5.5 EverFocus DVR connection................................................................................................. 13
5.6 Connection of several keyboards ......................................................................................... 15
5.7 .. 15 START-UP .......................................................................................................................
6 MENU SETTINGS..................................................................................................................... 16
6.1 Menu structure .................................................................................................................. 16
6.2 COM PORT SETTING - RS-485 interface setting .................................................................... 17
6.3 DEVICE SETTING............................................................................................................... 17
6.3.1 Camera setting (changed from FW 1.5)........................................................................ 17
6.3.2 Monitor setting (changed from FW 1.5)....................................................................... 18
6.3.3 DVR Setting............................................................................................................... 19
6.3.4 Camera List & Delete.................................................................................................. 19
6.3.5 Monitor List & Delete.................................................................................................. 19
6.3.6 DVR List & Delete....................................................................................................... 20
6.3.7 Non-listed devices ...................................................................................................... 20
6.4 KEYBOARD SETTING.......................................................................................................... 21
6.4.1 Sub Keyboard Setting ................................................................................................. 21
6.4.2 MENU Password......................................................................................................... 21
6.4.3 Lock password ........................................................................................................... 22
6.4.4 Buzzer ON/OFF .......................................................................................................... 22
6.4.5 Joystick calibration ..................................................................................................... 22
6.4.6 Keypad test ............................................................................................................... 23
6.4.7 Jog & Shuttle test....................................................................................................... 23
6.4.8 Load default setting.................................................................................................... 23
6.4.9 Firmware update........................................................................................................ 23
7 OPERATION............................................................................................................................ 24
7.1 New EKB-500 operation concept (from Firmware 1.5) ........................................................... 24
7.2 MONITOR SELECTION........................................................................................................ 24
7.3 CAMERA SELECTION .......................................................................................................... 24
7.4 DVR Password input........................................................................................................... 25
7.5 DVR MAIN MONITOR OPERATION....................................................................................... 25
7.6 PTZ OPERATION / SETUP ................................................................................................... 27
7.6.1 EverFocus EPTZ series................................................................................................ 28
7.6.2 EverFocus ED 2200/2250, Samsung El. SCC-641/643/6405 operation ............................. 33
7.6.3 Pelco-D / -P protocol compatible devices’ operation....................................................... 34
7.6.4 LG protocol compatible devices’ operation .................................................................... 36
7.6.5 Panasonic protocol compatible devices’ operation.......................................................... 36
8 SPECIFICATIONS..................................................................................................................... 37
9 APPENDIX A: FACTORY SETTINGS............................................................................................ 38

Specyfikacje produktu

Marka: EverFocus
Kategoria: Niesklasyfikowane
Model: EKB500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z EverFocus EKB500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane EverFocus

EverFocus

EverFocus Palun Instrukcja

21 Września 2024
EverFocus

EverFocus EHA-CRX Instrukcja

21 Września 2024
EverFocus

EverFocus EFC-02-1A Instrukcja

21 Września 2024
EverFocus

EverFocus EKB200 Instrukcja

18 Września 2024
EverFocus

EverFocus EKB500 Instrukcja

18 Września 2024
EverFocus

EverFocus EP4CQ Instrukcja

18 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024