Instrukcja obsługi EverFocus EKB200

EverFocus Niesklasyfikowane EKB200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EverFocus EKB200 (17 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/17

EKB200

USB Controller Keyboard

Installation / Operation Instructions

Rev. 1.0

SAFETY WARNINGS

• Do not place the device near to heaters, furnaces, other heat sources or under direct solar irradiation.

• Operate the device only in locations providing the tolerable operating temperature range 0°C~50°C.

• For cleaning, make sure the device is plugged off and only use a damp cloth without acid detergent.

• Install the device only in dry and dustproof surroundings. Protect the device against any liquid’s

penetration.

• Avoid the penetration of any artefacts, e.g. through ventilation slots.

• Do not open the device yourself. In case of malfunction, contact your local installer or dealer.

Unauthorized opening of the device will annul the warranty claim!

• Use the device only for purposes described in this manual.

• Operate the device only with the power source indicated in the technical data.

WEEE

ATTENTION! This is a class A product which may cause radio interference in a domestic environment; in this

case, the user may be urged to take adequate measures.

This equipment has been tested and found to comply to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This Product is RoHS compliant.

our

ver

ocus pro

gne

manu

ure

ith

qua

lit

y ma

and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life,

should be disposed of separately from your household waste.

Please, dispose of this equipment at your local community waste collection/recycling

centre.

In the European Union there are separate collection systems for used electrical and

electronic product.

Please, help us to conserve the environment we live in!

The information in this manual was current upon publication. The manufacturer reserves the right to revise and improve his products.

Therefore, all specifications are subject to change without prior notice. Misprints reserved.

Please read this manual carefully before installing and using this unit. Be sure to keep it handy for later reference.

CONTENTS

1 Introduction......................................................................................................................................................2

2 Delivery scope .................................................................................................................................................2

3 Specifications...................................................................................................................................................3

Installation...........................................................................................................................................................3

Installation...........................................................................................................................................................4

3.1 USB - Connection..................................................................................................................................4

3.2 Sunk-In Desk Installation.......................................................................................................................4

3.3 Key labels ..............................................................................................................................................5

3.4 Function check and Calibration at PC ...................................................................................................5

3.5 Installation of JoyMap............................................................................................................................8

4 Operation.......................................................................................................................................................10

4.1 Assigning Windows functions with JoyMap - application ....................................................................10

4.2 EKB-200 Operation with PowerCon Management Software...............................................................14

1 INTRODUCTION