Instrukcja obsługi EverFocus EDH5240

EverFocus Kamera monitorująca EDH5240

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EverFocus EDH5240 (23 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/23
2 Megapixel Full HDcctv
Indoor IR Dome Camera
Operation Instructions
Model No.
EDH5240
Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers since the electromagnetic fields generated from these devices may distort the video image.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment failure or other
damage.
3. Try and avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal
circuits.
4. Keep the power cord away from water and other liquids and never touch the power cord with
wet hands.
Touching a wet power cord with hands or touching the power cord with wet hands may result in electric
shock.
5. Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove any
dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor
and the camera lens. Please do not use complex solvents, corrosive or abrasive agents for cleaning.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within 0 ~ 40 (32  ~104 ) and humidity between 20~80%. The
input power source is 12VDC/24VAC.
- 1 -
TABLE OF CONTENTS
1. PRODUCT OVERVIEW........................................................................................................... 2
1.1 Main Features ............................................................................................................................................... 2
1.2 Package Contents.......................................................................................................................................... 2
1.3 Specifications................................................................................................................................................ 3
1.4 Dimensions ................................................................................................................................................... 4
2. MAJOR PARTS: NAMES AND FUNCTIONS .............................................................................. 4
3. 3-AXIS GIMBAL BRACKET ..................................................................................................... 7
4. INSTALLATION ................................................................................................................ 8
4. OSD Menu & Configuration.................................................................................................... 15
4.1 Exposure .................................................................................................................................................... 17
4.1.1 Lens ........................................................................................................................................................ 17
4.1.2 Shutter..................................................................................................................................................... 18
4.1.3 AGC (Auto Gain Control – basic low light signal amplification) ....................................................................... 18
4.1.4 BLC ......................................................................................................................................................... 18
4.1.5 Anti-Flicker ............................................................................................................................................... 18
4.2 White Balance Control.................................................................................................................................. 18
4.3 Day/Night.................................................................................................................................................... 19
4.4 Special........................................................................................................................................................ 19
4.4.1 Resolution................................................................................................................................................ 19
4.4.2 Camera Title............................................................................................................................................. 19
4.4.3 D-Effect.................................................................................................................................................... 20
4.4.4 TV standard.............................................................................................................................................. 20
4.4.5 Language................................................................................................................................................. 20
4.4.6 Default..................................................................................................................................................... 21
4.5 Image Adjust ............................................................................................................................................... 21
4.5.1 Sharpness................................................................................................................................................ 21
4.5.2 Brightness................................................................................................................................................ 21
4.5.3 Contrast ................................................................................................................................................... 21
- 2 -
1. PRODUCT OVERVIEW
The EDH5240 is an HDcctv 3-axis indoor dome camera with true Day/Night capability plus IR
illumination, in a housing which can be surface or flush mounted. Based on a 2 megapixel progressive
scan sensor for your choice of 1080 or 720 resolution HD 100% digital images, it delivers vastly superior
video quality compared to traditional CCTV images. This superior resolution not only captures more
critical evidentiary information, but the inherent ability for megapixel video to zoom with clarity to 4X or
more improves and extends the area of coverage, expedites completion of investigations, resolves
complaints and reduces both capital and operational costs.
No major upgrade to the IT network is required to deploy this powerful technology; HDcctv cameras
communicate at digital speeds up to 1.5Gb/s over existing or new coaxial cable (RG59 or other types
for longer distances), using industry standard BNC connectors. With a vari-focal 3.3~10mm megapixel
auto iris lens, combined with high output IR LEDs to produce detailed images under low or no light
conditions out to a range of 20m/65 feet or more, the EDH5240 easily accommodates a wide range of
indoor applications while delivering stunning image quality.
1.1 Main Features
HDcctv 2 Megapixel real time 1920x1080 (or 1280x720) HD video over coax
2 megapixel progressive scan CMOS sensor
Supports video outputs of 1080i, 1080p and 720p (field select)
True day/night operation with automatic ICR module
3-axis positioning for flexible mounting and aiming
3.3~10mm AI VF megapixel lens captures the desired field of view
Field select choice of wall or ceiling, surface or flush mounting
Easy to use OSD setup menu
Dual Video Outputs: Megapixel HDcctv (BNC)
SD TV Out (BNC) for aim and focus using a standard hand held test monitor
Dual Power Source 12VDC/24VAC dual voltage auto polarity detect
IR distance up to 65 feet/20m or more; High output IR LEDs, lifespan of 20,000 hours
1.2 Package Contents
Please be careful when you unpack the box and the electronic devices inside. Check and make
sure that you have all the items listed below inside the original box:
Camera Unit x 1, including dome/cover, camera unit and outer (surface mount) base as an
assembly
This Operation Manual x 1
Accessory pack #1 containing:
4 long mounting screws
4 washers
4 plastic anchors
Hex key for cover screws

Specyfikacje produktu

Marka: EverFocus
Kategoria: Kamera monitorująca
Model: EDH5240

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z EverFocus EDH5240, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca EverFocus

EverFocus

EverFocus EQ350 Instrukcja

23 Września 2024
EverFocus

EverFocus EZN7221 Instrukcja

22 Września 2024
EverFocus

EverFocus ED200/N-3W Instrukcja

22 Września 2024
EverFocus

EverFocus EHN3261 Instrukcja

22 Września 2024
EverFocus

EverFocus EBD935 Instrukcja

22 Września 2024
EverFocus

EverFocus EQ250A/N Instrukcja

22 Września 2024
EverFocus

EverFocus EBD430 Instrukcja

22 Września 2024
EverFocus

EverFocus EM900FP4 Instrukcja

22 Września 2024
EverFocus

EverFocus EIVP-KBU-IV-V0004 Instrukcja

22 Września 2024
EverFocus

EverFocus EDN468ME Instrukcja

22 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025
Toshiba

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025
AVerMedia

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025
Digitus

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2163G0-I(S) Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2H83G1-IZS Instrukcja

12 Stycznia 2025
Speco Technologies

Speco Technologies O5LB1 Instrukcja

12 Stycznia 2025
ZKTeco

ZKTeco AntarVis 2.0 Instrukcja

12 Stycznia 2025