Instrukcja obsługi EverFocus ED640

EverFocus Kamera monitorująca ED640

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla EverFocus ED640 (9 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/9
Indoor DWDR 3-Axis Varifocal
700TVL IR Dome Camera
Operation Instructions
Model No. ED640
Please read this manual first for correct installation and operation. This manual should be
retained for future reference. The information in this manual was current when published.
The manufacturer reserves the right to revise and improve its products. All specifications are
therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and
audio speakers since the electromagnetic fields generated from these devices may distort the
video image or otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein. Improper disassembly or introduction of
corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or
internal circuits, as well as creating unbalanced illumination beyond the capability of the camera
to compensate.
4. Keep the power cord away from water and other liquids and never touch the power cord
with wet hands. Touching a wet power cord with your hands or touching the power cord with
wet hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly with the
hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the
camera lens. Use a damp soft cloth to remove any dirt from the camera body. Please do not use
complex solvents, corrosive or abrasive agents for cleaning of any part of the camera.
7. Do not operate the camera beyond the specified temperature, humidity or power source
ratings. This camera is suitable for indoor operation only. Use the camera at temperatures within
-10° ~ +50° (14 ~122 ) and humidity between 30% and 90%. The input power source is
12VDC. Regulated power supply required.
2
8. Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera plus
any wind, snow, ice or other loading, and securely attach the camera to the mounting surface
using screws and anchors which will properly support the camera. If necessary (e.g. when
mounting to drop ceilings) use a safety wire to provide additional support for the camera.
Table of Contents
Product Overview ………………………………………………………………… 2
Main Features ……………………………………………………………………... 2
Box Contents ……………………………………………………………………….. 2
Specifications…………………………………………………………………….... 3
Dimensions ………………………………………………………………………... 4
Installation ………………………………………………………………………… 5
OSD Menu Controls and Test Point ……………………………………………….. 5
Lens Adjustment…………………………………………….………………………. 5
Menu Setting ………………………………………………………………………..... 6
Product Overview
Get superior performance and high resolution images in bright light or light. The EverFocus ED640 uses a Sony no
Super HAD II Color CCD to produce high quality color images with a minimum of 630 horizontal TV lines of resolution.
Combine this with digital day/night, a native low light sensitivity of 0.01 lux, and 24 IR LEDs with a range of 82 feet
( ), a 3-axis wall or ceiling mount indoor plastic housing and you have a cost effective depending on scene IR reflectivity
camera that fits a wide variety of indoor applications. The ED640 comes with a 2.8~12mm VF AI lens that covers a
field of view up to 82° wide, or can magnify images for increased detail. With low 12VDC current draw, this is the
camera that you have been waiting for to create analog CCTV systems that deliver superior image clarity in a wide
range of indoor applications at virtually any light level.
Features
• 1/3” Sony Super HAD II Color CCD with high resolution of 700TVL for high image clarity
• Full OSD with features like DWDR, HLC/BLC, DNR, Anti-Color-Roll and more
• 2.8~12mm VF AI lens covers from wide angle of 82° to moderate telephoto field of view
• 3-Axis camera mount for flexible mounting and positioning
• 24 IR LEDs with range of 82 feet for long distance coverage smart
• Smart LEDs avoid over exposure of close in objects
• Digital Day/Night for color in bright light, IR illuminated B/W in low light
• DC12V only 320mA draw
Box Contents
Camera
User Guide
Mounting Screw (3)
Power adaptor pigtail
Housing Opener
Mounting template
Video Test Point Cable
3
Specifications
TV System NTSC
Image Sensor 1/3” Sony Super HAD II Color CCD
Effective Pixels 768Hx494V
Resolution 700 TV Lines
Lens 2.8~12mm VF AI
Scanning System 525Lines, 2:1Interlace
Scanning Frequency 15.734KHz(H),59.94Hz
Auto Shutter Speed 1/60 to 1/100,000sec.
Sync. System Internal
S/N Raito More than 52dB (AGC off)
OSD 5 Button Navigation. Multiple options
OSD Language English, Spanish, French, Portuguese,
German, Polish, Japanese, Chinese
Day & Night Auto/Color Black & White;
Digital Day/Night with programmable switch levels and delays
Min. Illumination 0.01 lux nominal; 0 lux with IR LEDs on
IR LEDs 24 smart LEDs, 850nm
IR Range 82 feet
(depends on scene IR reflectivity)
Smart IR Control Off/On with programmable area of interest and gain
Auto Gain Control Off, Low, Middle, High
DWDR Off/On with adjustable weight
BLC Off/On for two areas with programmable
area of interest and gain
BLC/HLC
HLC Off/Night Only/Always with adjustable level
Gamma Correction 0.45; Display compensation option for CRT or LCD with
adjustable levels
DNR 2D DNR Off/On
Lens Shading
Compensation Off/On, adjustable for level and image center
Mirror Off/On
Negative Image Off/On
White Balance AWB ( 2,100˚k ~ 9,100˚k)
Digital Pixel Correction Manual operation; programmable threshold and area

Specyfikacje produktu

Marka: EverFocus
Kategoria: Kamera monitorująca
Model: ED640

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z EverFocus ED640, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca EverFocus

EverFocus

EverFocus EQ350 Instrukcja

23 Września 2024
EverFocus

EverFocus EZN7221 Instrukcja

22 Września 2024
EverFocus

EverFocus ED200/N-3W Instrukcja

22 Września 2024
EverFocus

EverFocus EHN3261 Instrukcja

22 Września 2024
EverFocus

EverFocus EBD935 Instrukcja

22 Września 2024
EverFocus

EverFocus EQ250A/N Instrukcja

22 Września 2024
EverFocus

EverFocus EBD430 Instrukcja

22 Września 2024
EverFocus

EverFocus EM900FP4 Instrukcja

22 Września 2024
EverFocus

EverFocus EIVP-KBU-IV-V0004 Instrukcja

22 Września 2024
EverFocus

EverFocus EDN468ME Instrukcja

22 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Dahua Technology

Dahua Technology Pro IPC-HDPW5442G-Z Instrukcja

15 Stycznia 2025
Toshiba

Toshiba IKS-WR7412 Instrukcja

13 Stycznia 2025
AVerMedia

AVerMedia FC1320-P Instrukcja

13 Stycznia 2025
Digitus

Digitus OptiMax DN-16037 Instrukcja

13 Stycznia 2025
Hikvision

Hikvision DS-2CE59U1T-AVPIT3ZF Instrukcja

12 Stycznia 2025
Hikvision

Hikvision IDS-2CD7526G0-IZHSY Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2163G0-I(S) Instrukcja

12 Stycznia 2025
Hikvision

Hikvision DS-2CD2H83G1-IZS Instrukcja

12 Stycznia 2025
Speco Technologies

Speco Technologies O5LB1 Instrukcja

12 Stycznia 2025
ZKTeco

ZKTeco AntarVis 2.0 Instrukcja

12 Stycznia 2025