Instrukcja obs艂ugi ESI MoCo

ESI Kontroler MoCo

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla ESI MoCo (3 stron) w kategorii Kontroler. Ta instrukcja by艂a pomocna dla 2 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
User's Guide
Passive Monitor Controller
with 2 stereo I/O
1
MoCoESI
Introduction
Thank you for choosing ESI MoCo, a fully passive monitor controller
that helps you to provide perfect control over the playback volume of
your studio monitors; "fully passive" means that there are no active
components involved, that could in any way alter the audio signal -
keeping the maximum sound quality level for your studio monitors.
MoCo provides two separate stereo inputs and two separate stereo
outputs.
Connectors
The rear panel of MoCo provides on the right section a pair of
balanced TRS inputs (left / right), which is labled as input . Next to A
it is input , which is provided with stereo RCA connectors as well as B
stereo mini-jack connection. The output labled is provided with A
balanced XLR connectors in the middle of the unit. Output in the B
left section of the back panel is availab le both with balanced /
unbalanced TRS connectors (left / right) and with a stereo mini-jack
connector.
Usage
Typically, MoCo is connected and used between your computer with
it's soundcard or an audio interface and your usually active studio
monitor speakers. For that you connect your computer or your audio
interface with one of the inputs of MoCo and at least one of the
outputs with your monitors. If you have multiple sources (i.e. both
your soundcard and a professional audio interface), you can connect
them simultaneously via inputs and . Via the outputs and , A B A B
usage of two pairs of speakers can be used simultaneously (i.e. to
compare signals via the separate speakers). Please keep in mind that
there is no conversion of unbalanced audio signals into balanced audio
signals.
Functions
The knob controls the output volume, while allows VOLUME MUTE
you to mute the signal to have silence. The section provides OUTPUT
the possibility to select which outputs are currently active via the A
2
MoCoESI
and buttons. The B A/B INPUT switch in the section allows you to
select the audio signal source, while L
<
-
>
R provides the option to swap
the left and right audio channel. creates a down mix where the MONO
left and right audio signal are each played via both audio output
channels.
General Information
Trademarks: ESI and MoCo are trademarks of ESI Audiotechnik
GmbH. Other product and brand names are trademarks or registered
trademarks of their respective companies.
Correspondence: For technical support inquiries, contact your
nearest dealer, local distributor or ESI support online at www.esi-
audio.com.
Disclaimer: All features and specifications subject to change without
notice. Parts of this manual are continually being updated. Please
check our web site www.esi-audio.com occasionally for the most
recent update information.

Specyfikacje produktu

Marka: ESI
Kategoria: Kontroler
Model: MoCo

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z ESI MoCo, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮


Instrukcje Kontroler ESI

ESI

ESI MoCo Instrukcja

21 Sierpnia 2024

Instrukcje Kontroler

Najnowsze instrukcje dla Kontroler

BeamZ

BeamZ WTR10-5 Instrukcja

5 Stycznia 2025
Audibax

Audibax MC1000 Instrukcja

5 Stycznia 2025
Somfy

Somfy Keypad 2 RTS Instrukcja

1 Stycznia 2025
Somfy

Somfy Keypop RTS Instrukcja

1 Stycznia 2025
Somfy

Somfy Wall Switch 3 RTS Instrukcja

1 Stycznia 2025
Logitech

Logitech Driving Force Shifter Instrukcja

31 Grudnia 2025
MOZA

MOZA Hand Brake Instrukcja

31 Grudnia 2025
Steelseries

Steelseries Stratus Duo Instrukcja

31 Grudnia 2025
Genesis

Genesis MANGAN 400 Instrukcja

30 Grudnia 2025
Speed-Link

Speed-Link RAIT SL-650110-BK Instrukcja

29 Grudnia 2024