Instrukcja obsługi Erica Synths Fusion VCF3
Erica Synths
fortepian
Fusion VCF3
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Erica Synths Fusion VCF3 (2 stron) w kategorii fortepian. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
THANK YOU FOR ORDERING
ERICA FUSION VCF3!
The Erica Synths Fusion series
modules are designed combining
vacuum tubes and semiconductors
therefore they bring warm, powerful
sound and overdrive possibilities of
vacuum tubes into your modular
system. Erica Fusion series consist of
range of modules used in sound
generation and shaping circuit – two
types of VCO, Mixer, real Ringmodula-
tor using audio transformers and
germanium diode ring, two VCFs, VCA,
Analogue Delay/Flanger, Palsma Drive
and others. Also Erica Fusion Systems
are available.
The Fusion VCF3 is resonant 24dB/oct
lowpass filter of unique design that
combines vacuum tubes and vactrols,
providing distinct, soft filtering. For
more versatility, the independent
audio mixer and buffered multiple is
incorporated in the module, and, most
importantly – a CV recorder that
records motion of the potentiometer,
so you can design advanced
modulation patterns.
These are audio mixer input level
controls. The mixer has gain 2, so
you can overdrive the signal for
nice distortion effects.
These are the audio mixer inputs.
This is dedicated mixer output. If
nothing is patched here, it is
normalled to the VCF input.
This is precision buffered
multiple input. Use it to split
audio and CV signals for use in
several modules, also for
feedback loops.
These are buffered multiple
outputs.
This is manual VCF cutoff
frequency control knob; the CV is
added to the knob position.
This is the VCF resonance control.
This is CV record knob.
Rotate it to record a
desired automation. When
the automation is played back,
the knob becomes divider
and multiplier. If you rotate the
knob past 12:00 clockwise,
multiplication with 2, 3, 4, 8 is
available, when rotating it
counterclockwise, same divisions
are available.
This is CV record button. In order
to record the potentiometer
automation, push and hold the
button and rotate the potentiometer.
The brightness of the knob will
indicate the CV output. To record a
next automation, push and hold the
CV record button while the
previous automation is playing and
rotate the CV record potentiome-
ter; the previous automation will be
deleted. You can pause the
automation playback on the
momentary CV value by pushing
the CV record knob promptly once.
To clear the recorded buffer, push
the button twice.
This is the recorded CV Output.
Maximum CV range is 0 - +5V.
The CV Output is normalled to
the VCF CV IN1, so, if nothing is
patched into CV1 IN, the recorded
CV directly controls the VCF
cutoff. Obviously, you can use the
recorded CV to control other
modules in your system.
This is the gate output – the unit
will output +5V gate, when the
RECORD CV knob is turned past
12:00; the LED gives visual
feedback on the gate ON. You can
use gate out for creating rhythmic
patterns manually.
This is the first external cutoff CV
input, and it’s normalled to the CV
recorder output. So, if nothing is
patched here, the CV OUT of the
recorder controls VCF cutoff.
This is the second cutoff CV input.
This is an external cutoff CV2
attenuator. CV1 and CV2 are mixed,
so you can adjust CV levels for
best effect.
This is the VCF audio input. It is
normalled to the Mixer output, so
you can mix several audio sources
before the VCF. If you use the
mixer output for patching mixer
output to different modules, patch
the VCF audio input here.
This is the VCF output
1
10
11
12
13
14
15
16
7
8
9
2
3
4
5
6
FUSION VCF3
2
L
V
L
I
N
3
L
I
N
2
L
I
N
1
L
V
L
R
E
S
O
N
A
N
C
E
C
U
T
O
F
F
MIX OUT MULT IN OUT1 OUT2 OUT3 VCF IN VCF OUT
IN1 IN2 T CV1 IN CV2 IN
O
R
D
C
V
6
1 7
14
8
1312
9
1
1
2
3 4 5 5 5 15 16
2 2 11 10
FEATURES:
Full analogue design
Vacuum tube and vactrol based filter circuit. Because of vactrol lag,
the VCF will not accept audio rate modulation, the maximum
modulation frequency is 10Hz
Input signal mixer with gain 2 for signal overdrive
Buffered multiple for splitting audio and CV signals
Potentiometer motion record unit with CV and gate outputs
Recorded CV multiplication and division
TECHNICAL SPECIFICATIONS:
Filter slope 24dB/oct
Audio Input level 10Vptp
CV input level -5V - +5V
CV Output level 0V - +5V
Panel width 20HP
Module depth 36mm
Power consumption 81mA@+12V, 76mA@-12V
You will nd Erica Synths terms of warranty at www.ericasynths.lvfi
Items for return, exchange and/or warranty repair have to be sent to:
Erica Synths
Andrejostas Str. 43
Riga
Latvia
LV-1045
User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@Black8.
Copying, distribution or any commercial use in any way is prohibited and needs the
written permission by Erica Synths.
Specifications are subject to change without notice.In case of any questions, feel
free to contact us through www.ericasynths.lv.
SAFETY INSTRUCTIONS
Please follow the instructions for use of the Erica Synths module below, ‘cause only this will guarantee proper operation of the module
and ensure warranty from Erica Synths.
The module has to be shipped in the original packaging
only. Any module shipped to us for return, exchange and/or warranty repair has to
be in its original packaging. All other deliveries will be rejected and returned to you.
Make sure you keep the original packaging and technical documentation.
This device complies to the EU guidelines and is manufactured RoHS conforming
without use of lead, mercury, cadmium and chrome. Nevertheless, this device is
special waste and disposal in household waste is not recommended.
Transport the instrument carefully, never let it drop or fall over. Warranty does
not apply to modules with visual damages.
Water is lethal for most of the electric devices, unless they are made waterproof.
This Erica Synths module is NOT intended for use in a humid or wet environment. No
liquids or other conducting substances must get into the module. Should this
happen, the module should be disconnected from mains power immediately, dried,
examined and cleaned by a quali ed technician. fi
Do not expose the module to temperatures above +50° C or below -20° C. If you have
transported module in extreme low temperatures, leave it in room temperature for an
hour before plugging it in.
Specyfikacje produktu
| Marka: | Erica Synths |
| Kategoria: | fortepian |
| Model: | Fusion VCF3 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Erica Synths Fusion VCF3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje fortepian Erica Synths
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
20 Czerwca 2024
Instrukcje fortepian
- fortepian Yamaha
- fortepian Gamdias
- fortepian Sven
- fortepian Ducky
- fortepian Technics
- fortepian Roland
- fortepian Panasonic
- fortepian Asus
- fortepian Nedis
- fortepian Native Instruments
- fortepian Casio
- fortepian Evolveo
- fortepian HP
- fortepian Genesis
- fortepian LogiLink
- fortepian Alesis
- fortepian TechniSat
- fortepian Keychron
- fortepian Korg
- fortepian Medeli
- fortepian Razer
- fortepian Kurzweil
- fortepian Kawai
- fortepian Roccat
- fortepian Havis
- fortepian Nektar
- fortepian K&M
- fortepian Xcellon
- fortepian Intellijel
- fortepian Artesia
- fortepian GeoVision
- fortepian IDance
- fortepian Max
- fortepian Viscount
- fortepian NUX
- fortepian Dexibell
- fortepian Crumar
- fortepian CLXmusic
- fortepian Orla
- fortepian Carry-on
Najnowsze instrukcje dla fortepian
7 Października 2024
7 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024