Instrukcja obsługi Emtec X150

Emtec Dyski półprzewodnikowe (SSD) X150

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Emtec X150 (3 stron) w kategorii Dyski półprzewodnikowe (SSD). Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
X150 2.5’’ SATA
STOP! IMPORTANT INFORMATION.
READ THE FOLLOWING CAREFULLY BEFORE USING THE EMTEC SSD.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Safety & Handling Instructions:
Avoid touching the Emtec SSD’s connector. Handle the Emtec SSD using its edge or frame. Do not remove, damage or cover any
product labels. Removal of such labels voids the warranty.
Ensure the Emtec SSD does not exceed following operating temperature:
- Minimum : 0°C
- Maximum : 70°C
Exercise caution when removing the Emtec SSD from the Desktop/Notebook as the Emtec SSD may have heated up.
Keep the Emtec SSD away from sinks, drinks, bathtubs, showers, rain and other sources of moisture.
Moisture can cause electric shocks with any electronic device. Do not disassemble, crush, short circuit or incinerate the Emtec SSD
as it may cause fire, injury, burns or other hazards.
Installation Guidelines:
Before installing the Emtec SSD please take all necessary precautions to comply with the Desktop/Notebook manufacturer’s
handling instructions.
1. Power off the Desktop/Notebook and disconnect the main power cord from the wall outlet. If the Desktop/Notebook uses a
removable battery, remove the battery.
2. Refer to the manufacturer’s instructions for details on how to remove the computer's outer case, and where the SATA connectors
are located on the motherboard.
3. According to the machine type:
a) Desktop: Connect the Emtec SATA SSD to the SATA data cable and insert the SATA cable into the SATA connector on the
motherboard.
Once you have installed the Emtec SATA SSD, put back the computer cover and plug back the power supply.
b) Notebook: Slide the Emtec SSD’s SATA connector into the Notebook’s SATA connector.
If necessary,reinstall the removable battery and plug back the power supply.
4. Power on the system to verify that the installation was successful.
Additional Safety Instructions:
Keep the Emtec SSD drive away from direct sunlight, moisture and extremes temperatures. Do not bend, flex or drop your Emtec
SSD drive. The user is responsible for complying with all environmental, safety and other usage specifications outlined in the Product
Manual.
For any further enquiries, please visit EMTEC website : http://www.emtec-international.com
Disposal Instructions:
Do not dispose the Emtec SSD with unsorted waste. Improper disposal may be harmful to the environment and human health.
Please refer to your local waste authority for information on return and collection systems in your area.
Data backup:
To prevent data loss, we strongly recommend to proceed at least to a backup of your data. Any data loss or corruption while using
SSD is the sole responsibility of the user. Under any circumstances will the manufacturer be held liable for compensation or data
recovery.
Warranty:
This SSD has 3 years warranty from date of purchase. Within the warranty period, we will repair or replace your SSD in case of
material or functional defect. We do not take any responsibility in case of data loss. It is suggested that one regularly backs up their
personal data.
The warranty does not apply:
1) For damages caused by natural disaster.
2) If the SSD has been repaired or dismounted by unauthorized persons.
3) If the product has been destroyed voluntarily or unvoluntarily.
4) If the warranty label or capacity information have been changed or removed, if the serial number does not appear clearly or does
not match.
5) If the SSD was bought from unauthorized channel.
6) If the warranty period has expired.
Manufacturer declarations / Déclarations du fabricant / Declaraciones del fabricante / Dichiarazioni del fabbricante /
Herstellererklärungen / Declarações do fabricante / Aangiften van de fabrikant / Deklaracje producenta
USA
FCC / CEC
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Canada
ICES- 003
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicable aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage
est susceptible d’en compromettre le fonctionnement.
Europe
CE
Australia /
New Zealand
RCM
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law.
You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably
foreseeable loss or damage.You are also entitled to have
the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to
a major failure
Environmental
ROHS
Reach
WEEE
Please dispose of this product by taking it to your local collection point or recycling center for such equipment.
Veillez à la mise au rebut appropriée de ce produit de en l’amenant à votre point de collecte local ou au centre
recyclage prévu pour traiter ce type de matériel.
Por favor, si desea deshacerse de este producto, llévelo a su punto local de recogida o un centro de reciclaje
para equipos electrónicos como este.
Smaltire il prodotto portandolo al punto di raccolta locale o Centro di riciclaggio per tali apparecchiature.
Entsorgen Sie das Produkt in einer lokalen Sammelstelle oder in einem für diese Art von Geräten zuständigen
Recycling-Zentrum.
Dirija-se ao ponto de recolha do seu local ou ao centro de reciclagem para deitar fora este produto.
Verwerk dit product als afval door het naar uw plaatselijk ophaalpunt of recyclagecentrum voor dergelijke
uitrustingte brengen.
Prosimy wyrzucic ten produkt w najblizszym lokalnym punkcie zbierania odpadów lub centrum odzysku tego typu
sprzetu.
EU :
DEXXON GROUPE
79 avenue Louis Roche
92230 Gennevilliers - France
USA/CANADA:
DEXXXON DIGITAL STORAGE / DEXXXON LOGISTICS
7611 Green Meadows Drive Lewis Center
OH 43035 USA –
EMTEC and EMTEC Logo are registered trademarks of DEXXON Groupe. All other trademarks are the property of their respective owners.
MODEL NUMBER : X1 50

Specyfikacje produktu

Marka: Emtec
Kategoria: Dyski półprzewodnikowe (SSD)
Model: X150

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Emtec X150, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Dyski półprzewodnikowe (SSD) Emtec

Emtec

Emtec X150 Instrukcja

8 Września 2024

Instrukcje Dyski półprzewodnikowe (SSD)

Najnowsze instrukcje dla Dyski półprzewodnikowe (SSD)

Origin Storage

Origin Storage DL3 FIPS Edition Instrukcja

9 Października 2024
Origin Storage

Origin Storage DataLocker DL3 Instrukcja

9 Października 2024
Origin Storage

Origin Storage DL128SSDV3 Instrukcja

9 Października 2024
Goodram

Goodram IR-SSDPR-P34B-01T-80 Instrukcja

9 Października 2024
Goodram

Goodram IR-SSDPR-P34B-512-80 Instrukcja

9 Października 2024
Goodram

Goodram IR-SSDPR-P34B-256-80 Instrukcja

9 Października 2024
Goodram

Goodram IR-SSDPR-P34B-02T-80 Instrukcja

9 Października 2024
Goodram

Goodram S400u M.2 Instrukcja

9 Października 2024
Goodram

Goodram IRP-SSDPR-S25C-512 Instrukcja

9 Października 2024
Goodram

Goodram IRP-SSDPR-S25C-02T Instrukcja

9 Października 2024