Instrukcja obsługi Elektrobock TS10

Elektrobock Gniazdo elektryczne TS10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Elektrobock TS10 (6 stron) w kategorii Gniazdo elektryczne. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
8WLOL]DWLRQH[DPSOHV
Temperature regulation
of connected appliance
MADE IN CZECH REPUBLIC
DESCRIPTION OF
CONTROLS
Fce = selection of functions
= selection of temperatures
= confirmation (ENTER),
information present
temperatur (tE:A), present
time , sum of (CL:O)
operating hours , (SU:MA)
and day (dE:n)
= setting of
temperature,time,
functions
/+
electric
heating
plates
direct
heating
bodies
electric
tubular
radiators
build-in temperature
sensor
DISPLAY DESCRIPTION
OPERATING INSTRUCTIONS
Setting of current day and time - “ CLO “ function
1. Functions of TS10
2. Proceed during programming
indication of set time and
temperature program
indication of
operating mode
indication of temperatures
comfort
economy
indication of required
temperature
After connection in 230V-socket is TS10 immediately ready for use. If sign
dO:bI is flashing on the display, the back-up battery is not fully charged
and it is necessary let the TS10 in 230V-socket to charge for minimal 2
days (full charge take about 4 days). After charging it is possible to remove
TS10 from socket without losing the actual time and you can provide the programming outside
the 230V-socket. (Maximal backup time is 100 hours).
After pushing the button you can select following functions by pushing
Fce
Fce
Fce
/+
/+
/+
/+
/+
: thermo-switch socket works according to program as set.
: serves for manual setting of temperature ( the selection by or by
buttons), the temperature should be constant up to next change of mode.
: setting of present day and time.
: setting of parameters (constants).
: programming mode.
: in this mode is TS10 permanently switched-off .
1. AUTO
2. MANU
3. CLO
4. PAr
5. PROG
6. OFF
Note: If you do not push any button in 2 minutes, TS10 returns into set mode. Longer pushing of
buttons speeds up their functions.
Before the programming itself, it is necessary to set present day, time and parameters (constants),
namely in following way.
Press the button, by pressing select CLO (CLOCK)
function and confirm by . Indication of hours blinks on the display,
use buttons to set required data and confirm by button.
Use the same method for minutes and day (d:1represents Monday,
d:2 Tuesday and d:7Sunday). After the completion of setting, press
button to return.
If we disconnect TS10 from the network 230V, the TS10 comes to stanby mode and
only actual time will be shown on display (the colon symbol will not be flashing) and the
buttos will be functionless. The activation of the buttons you can make by pressing the
button. When the sign dObI will be permanently shown on display, it is not possible
to make any settings on TS10 without connection into 230VAC
If the TS10 is not in 230V-socket the showed temperature is 2 °C lower than real actual temperature.
Parameters serve for setting of temperatures and another functions.
Setting of parameters (constants) - “ PAr “ function
PA:r2 economic temperature (the 17°C temperature is factory - set)
PA:r3 comfort temperature (the 23°C temperature is factory - set)
PA:r9 Firmwareversion/ factory setting restoration
- Press the button, by pressing select Par (Parameters)
and confirm by .
-PA:r2 shows on the display,
Fce
Fce
/+
/+
/+
-PA:r2 shows on the display
- confirm by and with using of buttons set economic
temperature and press button to confirm
-PA:r3 shows on the display
- confirm by and with using of buttons set comfort
temperature and press button to confirm
-PA:r9 shows on the display
- Firmware version for information only
- press button button to return.
Fce
/+
/+
Restoring the default settings:
- Press the button, by pressing select function Par and confirm by
button
- By pressing buttons select PA:r9, confirm by
- Simultaneously press and buttons, it will restore the factory settings!
Note: Use only when necessary, all saved changes will be deleted!
Fce
/+
/+
/+
Programming- “ PROG “ function
- Press the button, by pressing buttons select PROG
(PROGRAMMING) function and confirm by .
- By repeated pressing of buttons select one of following
options:
d:1 Monday
d:2 Tuesday
d:3 Wednesday
d:4 Thursday
d:5 Friday
d:6 Saturday
d:7 Sunday
d1:5 Monday to Friday
d6:7 Saturday to Sunday
d:1:7 all week
Tabel for day selection
- Confirm by , button. The sign 1:U1 shows on display for
setting up of the first time interval
- by pressing buttons set the time of first change (min. step
of 30 min.)
- assign comfort or economic temperature to the setting time by
repeated pressing of button
- Confirm by , display automatically shows symbol 1:U2 (the
second time interval in the first day).

Specyfikacje produktu

Marka: Elektrobock
Kategoria: Gniazdo elektryczne
Model: TS10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Elektrobock TS10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Gniazdo elektryczne Elektrobock

Elektrobock

Elektrobock BZ3-1S Instrukcja

30 Grudnia 2025
Elektrobock

Elektrobock ZSD16 Instrukcja

29 Sierpnia 2024
Elektrobock

Elektrobock ZS10 Instrukcja

27 Sierpnia 2024
Elektrobock

Elektrobock TS20 Instrukcja

25 Sierpnia 2024
Elektrobock

Elektrobock ZS4 Instrukcja

23 Sierpnia 2024
Elektrobock

Elektrobock TS10 Instrukcja

22 Sierpnia 2024

Instrukcje Gniazdo elektryczne

Najnowsze instrukcje dla Gniazdo elektryczne

Ikea

Ikea INSPELNING 005.698.36 Instrukcja

3 Stycznia 2025
Extron

Extron WPC 220 A EU Instrukcja

3 Stycznia 2025
Asrock

Asrock Z890 Pro RS Instrukcja

2 Stycznia 2025
Lanberg

Lanberg SM01-WPS34 Instrukcja

2 Stycznia 2025
Lanberg

Lanberg PDU-10I-0200-IEC-BK Instrukcja

2 Stycznia 2025
Lanberg

Lanberg PDU-08I-0200-C20-BK Instrukcja

2 Stycznia 2025
Lanberg

Lanberg PDU-03F-0200-IEC-BK Instrukcja

2 Stycznia 2025
Lanberg

Lanberg PDU-04E04I-0200-IEC-BK Instrukcja

2 Stycznia 2025
Asrock

Asrock Rack B650D4U3-2L2Q/BCM Instrukcja

1 Stycznia 2025
AVM

AVM FRITZ!DECT 400 Instrukcja

30 Grudnia 2025