Instrukcja obsługi Elektrobock BT010
Elektrobock
termostat
BT010
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Elektrobock BT010 (2 stron) w kategorii termostat. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
MADE IN CZECH REPUBLIC
The biggest advantage of BPT010 is the two way communication with the receiver and very simple
control of desired temprature by turn of roller on the transmittor. Installation without cutting the wall
and pulling wires are other advantages that convince you to modernize the regulation of your heating
system.Receiver is equipped with the autodidactic system and the E-EPROM memory that will keep
the stored code even during voltage failure.
The BPT010 can control only one receiver.
TECHNICAL PARAMETERS
Power supply 2x1,5 V alkal. batteries
Communication type two-way
Frequency 433,92 MHz
Vf-Sensitivity <10mW
Hysteresis 0,4 °C
Temp. range 11 °C to 29 °C (frost protection 3°C)
Protection IP20
Working temp. 0 to 40°C
Accuracy ± 1°C
DECLARATION OF CONFORMITY
We, ELEKTROBOCK CZ s.r.o., herewith declare that our product BPT010 is in conformity with
the basic requirements and other respective provisions of the directive 1999/5/ES. Issued:
1.04.2012
MADE IN CZECH REPUBLIC
Pb
LEAD FREE
Im Einklang mit RoHS
ELEKTROBOCK CZ s.r.o.
Blanenská 1763
Kuřim 664 34
Tel.: +420 541 230 216
www.elbock.cz
CERTIFICATE OF GUARANTEE
(guarantee period for the product amounts to 2 years)
product No.:
examined by::
date of sale::
stamp of shop:
Send the product for guarantee and after guarantee service to manufacturer’s address.
IMPORTANT INFORMATIONS
IF CAUSE and SOLUTION
On the transmitter flashes the LED
3 x in 8 s
Necessity of battery exchange.
Remowe the batteries for new ones.
On the transmitter flashes the LED
2 x in 8 s
Transmission error signal betwen transmitter and receiver
Check if the receiver is right connected to power supply. On receiver
press for about 3s the button for testing the connection - the relays
must several times switch on and off.
DESCRIPTION AND CHARACTERISTICS OF ELEMENTS TRANSMITTER DESCRIPTION
INSTALLATION
OPERATING
CODE LEARNING
- simple element for temperature setting - turning the knob
- indication of switching the receiver and errors by LED diodes
- night temperature reduction (by pressing the button there will occur an
automtic reduction by 3 °C for 8 °C each day)
- Press the „FUNCTION BUTTON“ on the receiver (for about 1.5 s), thus you introduce the receiver into the
learning state (see the pertinent receiver manual – BPT001, BPT002 or BPT003). The LED1 and LED2
diodes are flashing alternately on the receiver.
- On the BPT010 transimtter press (for about 3s) the button. On the transmitter BPT010 flash the 4x teh
red LED (sending the code + testing the receiver)
- Code acceptance by receiver is confirmed on the receiver by simultaneously flashing diodes
BPT010 wireless thermostat (transmitter)
- receiver with switched phase (suitable for, e.g., direct heaters and panels)
- switches the heating device by request and sends back confi rmation
- simple installation into a wiring box
- receiver statuses indicated by LED diodes on the front panel
- automatic activation in the system after a short-term power loss (E-EPROM)
- Lift off the front cover of the transmitter acc. to Fig. 3
- Fasten the back cover to the wall (or on the wiring box directly); see Fig. 4
- remove the protection paper form batteries (batteries are included in the packing);
- Fasten the front cover on the back one; see Fig. 6, 7.
- Necessity of battery exchange is indicated by red-LED (flash 3x in 8s)
- Always use the 2 x 1.5 V alkaline batteries, type AA! (Do not use rechargeable batteries.)
- The required temperature you can set only throug turning of the knob (range from 11°C, +/-1°C)
- The switched-on receiver is indicated by red LED (flash 1x in 8s)
- In desired time press the (for about 1s) the button, red LED flash 4x and the mode is activ.
- When you press button during countdown of reduction mode, the new 8 hour cycle will set up.
- When you turn with the knob (change the temperature), this (reduction) mode will be cancelled.
This mode reduce the temperature for 3°C each day for 8 hours.
BPT001 wireless receiver – under switch
- receiver with potential-free contact (suitable for boilers, etc.)
- switches the heating device by request and sends back confi rmation
- simple installation into a wiring box
- receiver statuses indicated by LED diodes on the front panel
- automatic activation in the system after a short-term power loss (E-EPROM)
BPT002 wireless receiver - wall
- receiver with switched phase (suitable for. e.g., direct heaters and panels
- switches the heating device by request and sends back confi rmation
- simple installation into an electric socket directly
- device simply connected by inserting into the socket (suitable for heaters
with plug outlet) receiver statuses indicated by LED diodes on the front panel
- automatic activation in the system after a short-term power loss (E-EPROM).
BPT003 wireless receiver – in the socket
LED INDICATION short press (1,5 s) - night temperature reduction
long press (3 s) - TEST (sending the code)
Knob for setting the
temperature
Holes for screws
Fig. 3
Fig. 5 Fig. 6 Fig. 7
Fig. 4
Note: Dispose of old batteries according to regulations for hazardous waste treatment!
Setting and change of temperature
Night temperature reduction
Example:
We set the desired
temperature on e.g.
22°C
At 10 p.m. we
press the button
for about 1s.
The desired
temperature will
be automatic each
day from 10p.m.
to 6 a.m. reduced.
for 3°C
Specyfikacje produktu
| Marka: | Elektrobock |
| Kategoria: | termostat |
| Model: | BT010 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Elektrobock BT010, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje termostat Elektrobock
3 Października 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
17 Września 2024
12 Września 2024
6 Września 2024
Instrukcje termostat
- termostat AEG
- termostat TP-Link
- termostat Bosch
- termostat Ferroli
- termostat Nobo
- termostat Theben
- termostat Crestron
- termostat Nexa
- termostat Tesla
- termostat Fenix
- termostat Taurus
- termostat Siemens
- termostat Eberle
- termostat Honeywell
- termostat Remeha
- termostat Truma
- termostat ORNO
- termostat TFA
- termostat Intergas
- termostat Google
- termostat Vimar
- termostat Schneider
- termostat Techno Line
- termostat Emos
- termostat Buderus
- termostat Renkforce
- termostat Corbero
- termostat BaseTech
- termostat Viessmann
- termostat Trotec
- termostat Somfy
- termostat Tado
- termostat AVM
- termostat Velleman
- termostat Homematic IP
- termostat Danfoss
- termostat Delta Dore
- termostat Vaillant
- termostat Devolo
- termostat Dimplex
- termostat Baxi
- termostat SPC
- termostat Atag
- termostat Westfalia
- termostat Remko
- termostat Oregon Scientific
- termostat Elro
- termostat Netatmo
- termostat Schwaiger
- termostat Hager
- termostat Junkers
- termostat Emerson
- termostat Vemer
- termostat Busch-Jaeger
- termostat Hunter
- termostat Fibaro
- termostat Salus
- termostat EQ-3
- termostat Emko
- termostat Heatmiser
- termostat Alecto
- termostat Avidsen
- termostat JUNG
- termostat Carrier
- termostat H-Tronic
- termostat EVE
- termostat Elgato
- termostat Wachendorff
- termostat Sygonix
- termostat De Dietrich
- termostat Müller
- termostat Profile
- termostat Nefit
- termostat Agpo Ferroli
- termostat Amfra
- termostat Itho
- termostat Energenie
- termostat Devi
- termostat Stiebel Eltron
- termostat Elco
- termostat Magnum
- termostat Horstmann
- termostat Tylö
- termostat Oventrop
- termostat King
- termostat Arnold Rak
- termostat Nest
- termostat Itho-Daalderop
- termostat Hive
- termostat Saunier Duval
- termostat Seitron
- termostat Plieger
- termostat Aube
- termostat Zehnder
- termostat Bulex
- termostat UPM
- termostat Optima
- termostat AWB
- termostat Finder
- termostat Xavax
- termostat Fantini Cosmi
- termostat Orbis
- termostat Niko
- termostat Boneco
- termostat Grasslin
- termostat Gira
- termostat Wolf
- termostat HQ
- termostat Max
- termostat Eneco
- termostat Frico
- termostat Vasco
- termostat Radson
- termostat EQ3
- termostat Go Green
- termostat Landis Gyr
- termostat Weishaupt
- termostat ICY
- termostat HomeMatic
- termostat Computherm
- termostat Mikoterm
- termostat Brink
- termostat Drayton
- termostat Oertli
- termostat Heatit
- termostat 2Heat
- termostat Bryant
- termostat Watts
- termostat Eqiva
- termostat Etherma
- termostat Veria
- termostat Emmeti
- termostat Thermy
- termostat Enda
- termostat Eurotronic
- termostat Worcester-Bosch
- termostat Econo-Heat
- termostat VDH
- termostat PECO
- termostat IR-V
- termostat EasyTemp
- termostat Helios (Amfra)
- termostat Tru Components
- termostat Easy Timer
- termostat Z-Wave
- termostat Hugo Muller
- termostat IMIT
- termostat Innogy
- termostat Wallair
- termostat Maico
- termostat Levica
- termostat HomePilot
- termostat Ouellet
- termostat THERMAFLEX
- termostat Yokis
- termostat ChiliTec
- termostat Eliwell
- termostat Plugwise
- termostat Johnson Control
- termostat Webasto
- termostat Drayton Erie
- termostat OJ ELECTRONICS
- termostat Tellur
- termostat RWE
- termostat Lowes
- termostat Jumo
- termostat Warmup
- termostat Qubino
- termostat STI
- termostat ELKO
- termostat TrickleStar
- termostat Gewiss
- termostat Sinustec
- termostat Rose LM
- termostat Otio
- termostat MundoControl
- termostat GENERAL Life
- termostat Oreg
Najnowsze instrukcje dla termostat
15 Października 2024
14 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024