Instrukcja obsługi Elektrobock BPT37

Elektrobock termostat BPT37

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Elektrobock BPT37 (14 stron) w kategorii termostat. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
BPT37
WIRELESS ROOM THERMOSTAT
BPT37 offers you a variety of applications for temperature control in households, offices or workshops.
The transmitting unit features comfortable and simple control. The large, well-arranged display informs
you about every current state of the thermostat. Thermal comfort is guaranteed by the possibility of ad-
justing constants (control system) for various heat sources to economize heating power consumption as
much as possible. The new code self-learning system ensures trouble-free operation with high interference
immunity. The wireless version enables easy and quick installation; there is no need for complicated and
tedious installation of the line between the thermostat and boiler involving floor penetration.
BOILER
cca 35 m
Two-way communication between the receiver and trans-
mitter (high reliability of signal transmission guaranteed)
Backlit display.
Possibility of locating the thermostat (transmitter) wherever
necessary.
The predictive system (smart timer) guarantees the given
temperature at the required time.
The adaptive regulator evaluates the temperature gradient
of the room and is able to determine the necessary time to
reach the required temperature.
The PI regulation system guarantees temperature increase
and its subsequent maintenance at optimum power con-
sumption.
The E-EPROM memory saves all data for an unlimited time
even during power failure.
Selection between PI regulation and hysteresis (0.1 to 1.5 °C).
Six time periods and temperatures for each weekday.
Nine weekly programs (optional).
Even / odd week selection.
Automatic change to WINTER or SUMMER time.
Measured temperature of -9 °C to 39 °C.
Calendar up to 2027.
Automatic indication of boiler maintenance.
Indication of boiler operating hours.
Receiver mains supply of 230V/50Hz.
Receiver with CODE SELF-LEARNING
system and E-EPROM memory (saves
the code even during voltage failure).
A THROUGH-WAY receiver socket for
connecting another device.
transmitter
receiver
version 11.02
2
BPT37 DESCRIPTION- receiver
potential-free (floating)
contact output for
boiler connection
power supply
230 V/50 Hz
FUNCTION BUTTON
INDICATING LEDs:
GREEN LIT
- indication of mains connection
ORANGE LIT
- relay closed
YELLOW
YELLOW BLINKING
- signal received
RED BLINKING
- empty E-EPROM memory
RED LIT
- FAILURE (if no signal from the transmitter is
detected within approx. 6 hours, it switches
to the “2-min-ON / 8-min-OFF” mode.)
YELLOW
YELLOW+RED BLINKING ALTERNATELY
- code learning mode
YELLOW
YELLOW+RED BLINKING SIMULTANEOUSLY
- code has been learned
THERMOSTAT LOCATION
We recommend that the installation be done by a person with suitable qualifications in electrical engineering!
Incompetent interference or damage voids the guarantee for the product!
1. Switch off the main circuit breaker.
2. Connect the boiler to the potential-free contact outputs (use the room thermostat
terminals – 2 wires).
3. Connect the receiver to the 230 V/ 50 Hz mains.
4. Switch on the main circuit breaker; the green diode lights up on the receiver; the receiver
is ready for operation.
CODE LEARNING (use if the receiver memory has been erased – the red diode blinks):
1, Press the receiver’s “FUNCTION BUTTON” for about 1.5 sec; the yellow and red LEDs start blinking
alternately; and the receiver awaits the code (“learning mode”).
2, Push the “TEST” button on the receiver; the signal sending sign appears on the display.
3, Receipt of the code in the receiver is indicated by simultaneous blinking of the yellow and red diodes;
thus the code has been learnt.
4, After receipt of the code, the output relay is switched several times to verify the correct functioning
of BPT37.
TESTING CORRECT CONNECTION:
On completion of the installation, test the correct connection by pushing the button on
the transmitter.
The boiler will be tested automatically. It switches ON and OFF several times, and the ,
sign appears on the transmitter display; the orange diode on the receiver indicates that the
relay is closed.
Test
SWITCHING FUNCTIONS:
AUT - pworking according to program
ON - permanently switched on
OFF - permanently switched off
through-way socket
for connection
of another device
short press:
start of the code learning mode
long press:
memory clearing
(preset code erased + RESET)
The transmitter must be located as far from interference sources (TV, PC, etc.) as possible; it must not be
placed on a metal base.
For its location, take the thermal properties of the place into account. Owing to bad signal reception,
install the receiver as far from large metal objects as possible (at least 0.5 m).
The receiver is functional immediately after connection to 230 V/ 50 Hz – the GREEN LED lights up.
The output switching contact is galvanically isolated from the control unit.
During installation, make sure that no heavy-current lines run along the thermostat.
INSTALLATION PROCEDURE
3
BATTERY INSTALLATION AND REPLACEMENT
GST1 module
connector
aerial
backlit character display
During the day, the backlight is
inactive, saving energy. Once it starts
getting dark (2 minutes of twilight), the
display automatically lights up for
approx. 2 s after any button is pushed.
control
buttons
battery
compartment
- Open the battery cover and remove the protective strip; thus the BPT37 becomes functional.
- During replacement, follow the correct polarity indicated in the battery compartment.
- The batteries must be replaced if the symbol starts blinking on the display.
- Always use alkaline batteries, type 2x1,5V typ AA!
(Note: is equipped with an E-EPROM memory which preserves the data saved even in case of voltage
failure)
Dispose of old batteries in conformity with regulations on hazardous waste handling!
!
BPT37 DESCRIPTION - transmitter
stand assembly
1.
2.
3.
GSM modul
Note: The stand
is delivered with
BPT37
Note: The GSM module is
not delivered with BPT37!
external sensor
connector

Specyfikacje produktu

Marka: Elektrobock
Kategoria: termostat
Model: BPT37

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Elektrobock BPT37, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje termostat Elektrobock

Elektrobock

Elektrobock BT730 Instrukcja

3 Października 2024
Elektrobock

Elektrobock PT 32 GST Instrukcja

27 Września 2024
Elektrobock

Elektrobock BPT 32 Instrukcja

27 Września 2024
Elektrobock

Elektrobock PT 14 Instrukcja

27 Września 2024
Elektrobock

Elektrobock PT 713 EI Instrukcja

27 Września 2024
Elektrobock

Elektrobock PT 713 Instrukcja

27 Września 2024
Elektrobock

Elektrobock BPT 22 Instrukcja

27 Września 2024
Elektrobock

Elektrobock BT710 Instrukcja

17 Września 2024
Elektrobock

Elektrobock BT102 Instrukcja

12 Września 2024
Elektrobock

Elektrobock PT01 Instrukcja

6 Września 2024

Instrukcje termostat

Najnowsze instrukcje dla termostat

Honeywell

Honeywell off Instrukcja

15 Stycznia 2025
Vaillant

Vaillant calorMatic VRT 370 Instrukcja

15 Stycznia 2025
AWB

AWB ExaControl Select SRT 50/2 Instrukcja

15 Stycznia 2025
Salus

Salus RT310SR Instrukcja

15 Stycznia 2025
Honeywell

Honeywell Round Wireless Modulation - Y87RF1004 Instrukcja

15 Stycznia 2025
Bosch

Bosch DT20RF DIGISTAT Instrukcja

14 Stycznia 2025
Drayton

Drayton MiStat C - C110C Instrukcja

13 Stycznia 2025
Drayton

Drayton DIGISTAT plus RF Instrukcja

13 Stycznia 2025
Drayton

Drayton MiTime T710R Instrukcja

13 Stycznia 2025
Drayton

Drayton MiTime T720R Instrukcja

13 Stycznia 2025