Instrukcja obsługi ELAC AirX2

ELAC Karta sieciowa/adapter AirX2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ELAC AirX2 (25 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/25

AirX2 Wireless Transmitter

OPERATING INSTRUCTIONS

ELAC AirX Transmitter | www.elac.com | Page 1

Important Safety Instructions

1. General information

• Please read and follow these safety instructions.

• Keep them safe for future reference.

• Observe all warnings on the unit and in the manual.

Please check the speaker for damage before use.

The unit must be in perfect working condition.

Damaged parts may lead to personal injury.

2. Use only as directed

• Connect the unit according to the instructions in

the manual.

3. Location

• Install the unit on a level surface only

• When choosing the location for this device do not

place them in locations that are:

• In direct sunlight

• Very humid

• Prone to vibrations

• Exceptionally hot or cold

Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

• Do not install this device in a closed rack or in a

closed cupboard.

• Do not put burning candles on or near the device.

• Do not install the device near transformers

because electromagnetic stray ﬁelds can cause

hum noise on woofers.

4. Service

DANGER! Do not open the cabinet because the components

and conductors may carry dangerous levels electricity! Ser-

vicing to be carried out by qualiﬁed service personnel only.

Servicing is required when the loudspeaker has been dam-

aged in any way, such as damage to the power supply cord

or the plug, or when liquid has been spilled or objects have

fallen into the loudspeaker, the speaker has been exposed

to rain or moisture, does not operate normally, or has been

dropped. To reduce the risk of electric shock, do not open the

loudspeaker. Servicing to be carried out by qualiﬁed service

personnel only.

ELAC AirX Transmitter | www.elac.com | Page 2

5. Cleaning

NOTE: Clean only with soft, smooth cloth or with dust brush.

Do not use scouring agents, alcohol, benzene, furniture

polish or other agents for cleaning! Modern furniture is often

coated with multiple varnishes and plastics which can be

treated with chemical agents. Some of these agents contain

substances which degrade or soften the rubber feet.

6. Disposal

The packaging is made from recyclable materials. Dispose of

this in an environmentally friendly manner. At end of life do

not dispose the speaker with the standard household waste.

The speaker must be recycled in accordance with local

legislation. Ask your local government for further information

on recycling as the device contains valuable raw materials.

Disable the speaker before disposal.

7. Power

This unit is only intended to be connected to voltages that

are listed on the rear panel of the cabinet. Connection to any

other voltage may cause irreversible damage to the subwoof-

er and will void the warranty. Use of plug adapters is not rec-

ommended because they may allow connection to voltages

other than those printed on the back of this subwoofer.

8. Compliance Information for the Wireless Transmitter

The term “IC:” before the radio certiﬁcation number only

signiﬁes that Industry Canada technical speciﬁcations were

met. This equipment complies with FCC and IC radiation ex-

posure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum

distance 20cm between the radiator and your body. This

transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

Operation is subject to the following two conditions: (1) this

device may not cause interference, and (2) this device must

accept any interference, including interference that may

cause undesired operation of the device.

To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the

equivalent isotopically radiated power is not more than that

permitted for successful communication.

Specyfikacje produktu

Marka:	ELAC
Kategoria:	Karta sieciowa/adapter
Model:	AirX2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ELAC AirX2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter ELAC

ELAC AirX2 Instrukcja

27 Sierpnia 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

SMK-Link VP6494 Instrukcja

17 Grudnia 2024

SMK-Link VP6493 Instrukcja

17 Grudnia 2024

Aukey PA-U32 Instrukcja

14 Grudnia 2024

Vigitron Vi3305 Instrukcja

10 Grudnia 2024

LevelOne FNC-0109TX Instrukcja

14 Października 2024

StarTech.com ST1000SPEX2T Instrukcja

9 Października 2024

StarTech.com ST1000SPEX2LT Instrukcja

9 Października 2024

StarTech.com AF221CE-POE-INJECTOR Instrukcja

9 Października 2024

StarTech.com USB3LINK Instrukcja

9 Października 2024

StarTech.com PCMACLINK2 Instrukcja

9 Października 2024