Instrukcja obsługi Easypix S318

Easypix kamera S318

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Easypix S318 (2 stron) w kategorii kamera. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Manual

1. Get to know your camera

1.1 Features

3.1 Mega pixels resolution sensor

Video clips

Audio record

Web camera

Built-in Microphone Voice recorder

Built-in flash Light

TV output with audio

1.5" TFT real color display

Internal 16MB flash memory and SD card support

Driver free for Windows 2000/XP/Vista and MAC 9.x and X.x

Macro mode

1.2 Specifications

Sensor 3.0 Me

ixel CMOS sensor

12.0 Mega pixels: (4032x3024) (Hardware Interpolation)

8.0 Mega pixels: (3264x2448) (Hardware Interpolation)

5.0 Mega pixels: (2560x1920) (Hardware Interpolation)

3.1 Mega pixels: (2048x1536)

1.3 Mega pixels: (1280x960)

Image resolution

300K pixels: (640x480)

Lens F/2.8 f=8.5mm

Focus range 0.5m. ~ Infinity

Macro mode 11cm – 18cm

Digital zoom 8x

Flash strobe Built-in (Auto/force/off)

LCD display 1.5" real color LTPS TFT

White balance Auto/Daylight/cloudy/Tungsten/Fluorescent

Video mode 30fps@QVGA &20fps@VGA

Built-in memor

16MB Flash memor

VGA: (640x480) --138 Pictures

1.3M: (1280x960) -- 54Pictures

3.1M: (2048x1536) -- 28 Pictures

5.0M: (2560 x 1920) -- 21 Pictures

8.0M: (3264x2448) -- 14 Pictures

Picture Capacity in

16M memory (The

quantity of pictures

varies and depends on

the complexity of the

scene) 12M: (4032x3024) --3 Pictures

External memory card SD card supports up to 2GB

File format Picture: JPEG, Video: AVI, Voice: WAV

Self timer 2/10/10+2 seconds

PC interface USB 1.1

TV-out NTSC/PAL

Power source 2xAAA alkaline batteries.(Rechargeable battery is not recommended)

1.3 System requirement

Windows 2000/XP/Vista

Operating System Mac 9.x or X.x

CPU Pentium II or above

RAM At least 64MB

Inte

face USB

ort

CD 4x s

eed CD ROM or above

2. Functional parts:

4 16

1 Shutter / OK

button

Press this button to take photographs or to start/stop recording a short video

clip. This button can be also used to confirm changes.

2 Power on/off

button The camera is turned on by pressing it; press it again to turn off.

3Self-timer

indicator Flashes when the self-timer function is used.

4Flash light Use the built-in flash to give the subject extra lighting if it is in dark

surroundings (the best flash distance is recommended within 1.5 m.).

5Macro mode

Switch

Macro mode: To take close-up photographs (distance 11cm- 18cm).

Normal mode: To take photographs of the surroundings or people (distance

of approximately 0.5M - infinity).

6AV port For television connection.

7USB

interface

Connect the camera to the computer. Via this connection, you can save

photographs and video clips on a computer or use the camera as a web cam

to chat on the Internet.

8Lens Records the image to be taken.

Note: Keep the lens clean. Dirt and fingerprints affect the outcome of the picture.

9Buzzer Buzzer

10 LCD screen

On the (TFT) LCD screen, you can do the following: view the image to be

photographed (Preview), view photographs and video clips, view camera

setting, and set the camera.

11 Macro LED When the indicator is lit, the camera is in Macro mode.

12 MIC For record voice.

13 UP UP & Digital zoom in

14 Down Down & Digital zoom out

15 Strap hook Hook for attaching the wrist strap to the camera.

16 Menu For the camera setting.

17 Left / flash light For menu left selection and flash light setting.

18 Playback/Mode Press it to playback mode, Press it and hold 2 seconds to different mode selection.

19 Right /display For menu right selection and LCD display on / off.

20 Battery door 2xAAA alkaline batteries

21 SD card slot SD card slot.

22 Tripod

connector For fix up the camera on tripod.

3. See following details to setting your digital

camera.

12M pixel resolution 4032 x 3024

8.0M pixel resolution 3264 x 2448

5.0M pixel resolution 2560 x 1920

3.1M pixel resolution(Default) 2048 x 1536

1.3M pixel resolution 1280 x 960

Size

VGA resolution 640 x 480

Quality Fine(Default)/Standard/Economy Picture quality set

Scene mode Auto(Default)/Sport/Night/

Portrait/Landscape/Backlight Scene set

Exposure

value

+/-2, +/-5/3, +/-4/3,

+/-2/3,+/-1/3 +/-1, 0(Default) Level of exposure

Auto (Default) Automatic white balance

Daylight White balance selected for daylight

surrounding

Cloudy White balance selected for cloudy surrounding

Tungsten White balance selected for tungsten lighting

White

balance

Fluorescent White balance selected for fluorescent

surrounding

ISO Auto(Default)/100/200 Sensitivity select

Color Standard (Default) / Vivid /

Sepia / Monochrome Color setting

Saturation Normal(Default) / High / Low Saturation setting

Sharpness Normal(Default) / Hard /Soft Sharpness setting

2s Set the delay time at 2s to take a picture

10s Set the delay time at 10s to take a picture

Self timer

10+2s

Set the delay time at 10s to take a picture,

and then every 2s to take pictures

automatically.

Date Input Off(Default)/Set DD,MM,YYYY

Time Stamp Off(Default)/Date Only/Date

& Time

Show the date and / or time on the

pictures

Capture

Continuous

shoot Continuous shoot Can continuously shoot up to 3 pictures

within 10 seconds.

Format Execute/cancel Format the memory card.

Language

English(Default)/T-Chinese/

S-Chinese/French/German/

Italian/Spanish/Portuguese

Select display language

Auto power

off 1/3/5 min and Off Auto power off in1min, 3min(default) or

5 min if no operation

Sys. Reset Execute/cancel Restore default setting

50Hz Main European electricity frequency Light-

Frequency

(Flicker) 60Hz Main American electricity frequency

NTSC American and Japanese video format

TV- Out PAL European video format.

PC Cam Work as a web camera.

SET

Setup

USB Disk Drive Act as a portable disk.

Note: The settings will not change when the camera is turned off

4. Explanation of the status icons

Item Function Description

1 Battery indicator

The batteries are full.

The batteries are empty.

2 Recording mode

Setting for photographs taking

Setting for videos capture

3 Date stamp Displays the date day/month/year

4 Memory or SD card

indicator

Indicates memory or SD card

: Pictures stored in built-in memory

:Pictures stored in SD card

5 Photo / Video counter

Photo mode :No. of balance picture can be taken;

Video mode: Balance of recording time in second;

Playback mode: The No. of pictures or video clips

6 Selected

12M= 4032x3024;

8M= 3264x2448;

5M=2560x1920;

3.1M = 2048x1536;

1.3M=1280x960;

VGA=640x480;

7 Flash indicator

: Force flash.

: Auto Flash: The camera determines if the flash

must be used or not.

: No Flash: The flash is turned off.

8 Picture quality

The quality is fine(Default).

The quality is standard.

The quality is economy.

9 Brightness Alert Alert user to hold the camera steadily.

10 Normal / Macro

mode indicator

Normal mode (0.5m – infinity)

Macro mode (11cm –18cm)

11 View center

5. Using the camera

5.1 Installing the batteries

1. Open the battery door.

2. Insert 2 AAA alkaline batteries into the camera.

3. Turn on the camera.

Press the POWER button to turn it on (press it again to turn off).

5.2 Inserting a memory card (not included)

This camera has built-in internal memory. This memory can be extended with a SD memory card

(not included).

Follow the instructions given below to insert the optional SD memory card into the camera.

1. Turn off the camera first.

2. Insert the SD card into the slot.

Note: There is only one way to insert the SD memory card into the slot. Do not force the card into

the slot. This may damage both the camera and the SD memory card.

Note: The SD memory card must be formatted before taking photographs. See the following

sections for more information.

5.3 Formatting the memory

If you use a SD card, it must first be formatted before you can take photographs. Follow the

instructions given below to do this.

1. Press Menu button

2. Select Setup setting by right key.

3. Press shutter to confirm and select by up or down key.

4. Press shutter to format the card or memory.

5.4 Setting the resolution

The camera can be set to different resolutions.

1. Press MENU to set proper resolution.

Resolution: VGA（640 x 480 1280 x 960），1.3M（） 3.1M (2048 x 1536),

5M (2560 x 1920), 8M (3264 x 2448), 12M (4032 x 3024)

2. Six different resolutions will be displayed. Select the desired resolution by using the ▲ or

▼buttons and then press the shutter button to confirm the selection.

5.5 Taking photographs

1. Turn on the camera by pressing the ON/OFF button.

2. Press MODE to set the camera to photo mode ( ).

3. Depending on the distance to the object being photographed, use Macro switch to

adjust the distance. Select the flower symbol ( ) if you wish to take a close-up

photograph (11cm –18cm).

If you wish to take photograph of surroundings or people (0.5m - infinity), set the Macro

switch to Normal mode ( ).

4. If you are not sure if there is enough lighting, turn the automatic flash ( ) on by pressing

the flash button. (If the battery power is too low, the flash won’t be activated).

5. Use the LCD screen to aim the object you wish to photograph.

6. Press Shutter button and hold the camera steadily for 2 to 3 sec, until the LCD display turn

on again.

Caution: 1) Taking picture for fast-moving object is not recommended.

2) Image may be distorted when taking picture in a moving vehicle.

5.6 Zoom in and out

The camera can zoom in up to 8 times.

1. Zoom in by pressing the ▲ or ▼ button, a number will appear on the display. 8.0 is the

maximum zoom.

2. You can zoom in by pressing the UP or DOWN button.

5.7 Taking photographs using self-timer function

You can use the self-timer function when you wish to take a photograph for yourself or when you

wish to photograph for an object where the camera must be as still as possible, for example on

the stand.

1. Set the camera to photo mode.

2. Press the MENU button. The quick menu will appear.

3. Press ▼ ▼ to self-timer mode, press shutter and ▲or to set the delay time: 2seconds / 10

seconds / 10+2seconds or off.

4. Press the shutter button to confirm. The self-timer function is now ready for use.

5. Aim at the object you wish to photograph.

6. Press the SHUTTER button to take a photograph.

7. The self-timer indicator LED in the front will blink.

8. The photograph will be taken after the timer reaches the delay time that you pre-set, and

the camera will beep once.

5.8 Recording video clips

1. Press the MODE button to select.

2. Press the SHUTTER button to start recording video, press the SHUTTER button again to

stop recording. The video clip will now be saved as an AVI file in the camera memory.

3. Press MENU to set proper resolution, EV and WB, and press OK to confirm.

5.9 Recording voice

1. Press MODE button to select the voice recording mode,

2. Press SHUTTER to start voice recording and press it again to stop.

5.10 Playback photographs

1. Press MODE button, press or to select the video photo.

2. Press ▲,photo will zoom in; press ▼,photo will zoom out

3. Press ▲, ▼, or to shift the image.

4. Press MENU to select SLIDE SHOW, and then press shutter to confirm. The pictures

saved in your camera or your SD card will be displayed in sequence automatically.

5.11 Playback video clips

1. When video clips are displayed, press ▲ to play, and press ▼ key to stop.

2. Press ▲ to pause the playback

3. Press MODE key to exit.

5.12 Delete photographs and video clips

You can choose to delete a single photograph / video clip, or delete all the photographs / video

clips in the memory.

5.12.1 Delete photograph

Follow the instructions given below to delete photograph.

1. Press MODE key to enter the playback mode.

2. Press the MENU button and select Delete One/Delete All, press OK to confirm.

3. If you select Protect picture, your current file or images can not be deleted.

4. Press MENU to exit.

NOTE: Select ‘Deleting All’ and Press OK to confirm, all the pictures will be deleted.

6. Installing the camera driver

The driver in the CD has to be installed, under following applications:

For Windows 2000, Windows XP and Windows Vista: For using as a PC cam only. (Download

picture /video is driver free)

6.1 Uninstalling old drivers and devices

There is a chance for a conflict between the new driver and an existing driver in the computer. In

that case, it is better to remove those drivers before installing the new driver.

1. Enter Windows ‘Safe Mode’ (press F8 when starting Windows and then select ‘Safe Mode’

from the menu which will be displayed).

2. Click on ‘Start – Settings – Control Panel’ and double-click on ‘Add/Remove Programs’

icon.

3. Find all the programs for similar, old devices and remove these by clicking on the

‘Add/Remove’ button. When in ‘Safe Mode’, it is possible for some programs to appear

twice. In that case, remove all the programs which appear twice.

4. Restart the computer.

6.2 Installing the driver for Windows 2000 /Windows XP /

Windows Vista

Note: Make sure all other programs are closed during the installation process.

Note: During installation for Windows XP/Vista, you may receive a message saying that the driver

has not been signed. This does not cause a problem for the functionality of the program.

Please click "Yes" to continue.

Note: For example, ‘D: \’ is used to indicate the CD-ROM drive. This may be different for your

computer.

1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation program will start

automatically. If it does not start automatically, please do the following:

a) Select 'Run' from Windows Start menu.

b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.

2. The Software Installer will appear.

3. Select the language you wish to use for the installation.

4. Click on ‘Install driver’ to start the installation of the camera driver.

5. Follow the on-screen instructions.

6.3 Connecting the camera

The camera can be connected to the computer in two different modes: Mass Storage Device, or

as a PC camera for video conferencing on the Internet.

6.3.1 Connecting as a mass storage device

1. Turn the camera on by pressing the ON/OFF button.

2. Press MENU button and press RIGHT key to select the Setup setting.

3. Press ▼button to set USB connection.

4. Press▲or ▼button to choose the Disk Drive mode.

5. Press OK to confirm.

6. Connect the camera to the computer.

7. Windows will automatically detect the camera. You can use this camera as a removable

disk.

6.3.2 Connecting as a PC camera

When you connect the camera as a PC camera, you can use the camera as a web cam for video

conferencing on the Internet by using Windows NetMeeting or Windows Messenger.

(You must install the driver before connecting the Digital Camera to your computer. )

1. Turn the camera on by pressing the ON/OFF button.

2. Press MENU button and press RIGHT key to select the Setup setting.

3. Press▼ button to chook USB connection.

4. Press▲or ▼ button to choose the PC camera mode.

5. Press OK to confirm.

6. Connect the camera to the computer.

7. Windows will automatically detect the camera. You can use this camera as a web camera.

7. Trouble shooting

Problem Cause Solution

Cannot turn on the camera by

pressing the “power” button.

Low battery power.

Battery placed at wrong

polarities.

Replace or install the battery

correctly.

Photos can not be saved

when taking pictures.

The memory card or

built-in memory hasn’t

been formatted properly.

Format the memory in SETUP mode

of the camera. Please refer to

section 5.3.

Cannot find removable disk

after connecting the camera

to the computer.

1. Connection failure.

2. The mode of the

camera is not set to

removable disk

properly

1. Make sure all cable connections

are secured and restart the

computer if necessary.

2. Set the camera to removable disk

mode, refer to section 6.3.1

(system setting, USB

connection).

Flash does not work. Battery Power is too low. Replace with new ALKALINE

battery.

The batteries used up very

fast.

Use wrong type of battery. Replace with new ALKALINE

battery.

The photos are over exposure

Set the flash light to force

mode in bright

environment.

Set the Flash light to Auto mode .

The photos are blurry

1. The camera is not held

steadily

2. The lens of camera is

dirty

1. Hold the camera steadily until it

beeps when taking photo.

2. Clean the lens with soft dry cloth.

Get a warning message:

“Capture device was not

detected” when trying to open

PC cam.

1. Conflict with another

camera or video

device.

2. The mode of the

camera is not set to

PC cam mode

properly.

1. Remove any other camera driver

completely from your system.

Sometimes you have to re-install

your system.

2. Set the camera to PC cam mode,

refer to section 6.3.2 (system

setting, USB connection).

Cannot preview image in PC

Camera mode.

“Preview” is not selected

in option Menu in PC.

Click “preview” in the “option” menu

to select it.

For EU only

AM-D310K-AGB-CLV-R

Specyfikacje produktu

Marka:	Easypix
Kategoria:	kamera
Model:	S318

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Easypix S318, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje kamera Easypix

Easypix KiddyPix Blizz Instrukcja

10 Października 2024

Easypix V515 Duo Instrukcja

2 Października 2024

Easypix 35 Instrukcja

28 Września 2024

Easypix Kiddypix Mystery Instrukcja

24 Września 2024

Easypix V10 Instrukcja

13 Września 2024

Easypix W508 Instrukcja

12 Września 2024

Easypix SC500 Instrukcja

10 Września 2024

Easypix W311 Instrukcja

7 Września 2024

Easypix Octonauts Instrukcja

4 Września 2024

Easypix S318 Instrukcja

4 Września 2024

Instrukcje kamera

Najnowsze instrukcje dla kamera

Trust Powerc@m 820 Instrukcja

15 Października 2024

AVerMedia Live Streamer CAP 4K BU113 Instrukcja

15 Października 2024

Bushnell Trophy Cam 119456 Instrukcja

13 Października 2024

Konica Minolta Hi-Matic GF Instrukcja

11 Października 2024

Samsung DV1506F Instrukcja

9 Października 2024

Kogan KAUNCAMBLUA Instrukcja

9 Października 2024

Polaroid 600 Series Instrukcja

9 Października 2024

Kogan KAKIDINCMRB Instrukcja

8 Października 2024

UniView IPC3615SB-ADF28(40)KM-I0 Instrukcja

8 Października 2024

UniView IPC3612SS-ADF28(40)K-I1 Instrukcja

8 Października 2024