Instrukcja obsługi Earthwise CVPS43010
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Earthwise CVPS43010 (48 stron) w kategorii kosiarka. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/48
OWNER S MANUAL’
ELECTRIC CONVERTIBLE 2 1 COMBO IN
CHAIN SAW/ POLE SAW
Copyright. All Rights Reserved.
This product has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble- free performance.
WARNING: To reduce the risk of injury, the user must read and understand the owner s manual before ‘
using this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Model CVPS43010
Chain Brake
OFF
Chain Brake
ON
See Page 10
DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING, ASSEMBLY, PARTS,
SERVICE QUESTIONS? GO TO WWW.AMERICANLAWNMOWER.COM, OR CALL
1 633 1501 BETWEEN 8:00AM 5:00PM EST FOR ASSISTANCE.-800- - -
IMPORTANT SAFETY WARNINGS
WARNING: Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term power tool in the warnings refers to your “ ”
mains operated (corded) power tool or battery operated - -
(cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
Personal safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
• Prevent unintentional starting. Ensure the switch is
in the off position before connecting to power -
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
invites accidents.
• Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust- related hazards.
Power tool use and care
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool s ’
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
2
Model CVPS43010
GENERAL POWER TOOL SAFETY WARNINGS
• Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Service
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
• When servicing a power tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance
instructions may create a risk of shock or injury.
• Keep all parts of the body away from the saw chain
when the chain saw is operating. Before you start the
chain saw, make sure the saw chain is not contacting
anything. A moment of inattention while operating chain
saws may cause entanglement of your clothing or body
with the saw chain.
• Always hold the chain saw with your right hand on the
rear handle and your left hand on the front handle.
Holding the chain saw with a reversed hand configuration
increases the risk of personal injury and should never be
done.
• Hold the power tool by insulated gripping surfaces
only, because the saw chain may contact hidden
wiring or its own cord. Saw chains contacting a live wire
may make exposed metal parts of the power tool live and
could give the operator an electric shock.
• Wear safety glasses and hearing protection. Further
protective equipment for head, hands, legs and feet is
recommended. Adequate protective clothing will reduce
personal injury by flying debris or accidental contact with
the saw chain.
• Do not operate a chain saw in a tree. Operation of a
chain saw while up in a tree may result in personal injury.
• Always keep proper footing and operate the chain saw
only when standing on fixed, secure and level surface.
Slippery or unstable surfaces such as ladders may cause a
loss of balance or control of the chain saw.
• When cutting a limb that is under tension be alert for
spring back. When the tension in the wood fibres is
released the spring loaded limb may strike the operator
and/or throw the chain saw out of control.
• Use extreme caution when cutting brush and saplings.
The slender material may catch the saw chain and be
whipped toward you or pull you off balance.
• Carry the chain saw by the front handle with the chain
saw switched off and away from your body. When
transporting or storing the chain saw always fit the
guide bar cover. Proper handling of the chain saw will
reduce the likelihood of accidental contact with the moving
saw chain.
• Follow instructions for lubricating, chain tensioning
and changing accessories. Improperly tensioned or
lubricated chain may either break or increase the chance
for kickback.
• Keep handles dry, clean, and free from oil and grease.
Greasy, oily handles are slippery causing loss of control.
• Cut wood only. Do not use chain saw for purposes
not intended. For example: do not use chain saw for
cutting plastic, masonry or non wood building -
materials. Use of the chain saw for operations different
than intended could result in a hazardous situation.
Causes and operator prevention of kickback:
Kickback may occur when the nose or tip of the guide bar
touches an object, or when the wood closes in and pinch-
es the saw chain in the cut.
Tip contact in some cases may cause a sudden reverse
reaction, kicking the guide bar up and back towards the
operator.
Pinching the saw chain along the top of the guide bar
may push the guide bar rapidly back towards the
operator.
Either of these reactions may cause you to lose control of
the saw which could result in serious personal injury. Do
not rely exclusively upon the safety devices built into your
saw. As a chain saw user, you should take several steps
to keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incorrect
operating procedures or conditions and can be avoided
by taking proper precautions as given below:
• Maintain a firm grip, with thumbs and fingers
encircling the chain saw handles, with both hands on
the saw and position your body and arm to allow you
to resist kickback forces. Kickback forces can be
controlled by the operator, if proper precautions are tak-
en. Do not let go of the chain saw.
• Do not overreach and do not cut above shoulder
height. This helps prevent unintended tip contact and
enables better control of the chain saw in unexpected
situations.
• Only use replacement bars and chains specified by
the manufacturer. Incorrect replacement bars and
chains may cause chain breakage and/or kickback.
• Follow the manufacturer s sharpening and ’
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to increased
kickback.
3
Model CVPS43010
Specyfikacje produktu
| Marka: | Earthwise |
| Kategoria: | kosiarka |
| Model: | CVPS43010 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Earthwise CVPS43010, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje kosiarka Earthwise
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
Instrukcje kosiarka
- kosiarka Electrolux
- kosiarka Worx
- kosiarka Braun
- kosiarka Honda
- kosiarka Philips
- kosiarka Stihl
- kosiarka Bosch
- kosiarka Yato
- kosiarka Parkside
- kosiarka Stiga
- kosiarka Toolcraft
- kosiarka Kärcher
- kosiarka Panasonic
- kosiarka MacAllister
- kosiarka Stanley
- kosiarka Black & Decker
- kosiarka Scheppach
- kosiarka Adler
- kosiarka BaByliss
- kosiarka Marquant
- kosiarka Conair
- kosiarka Taurus
- kosiarka Orbegozo
- kosiarka Grizzly
- kosiarka Gardena
- kosiarka DeWalt
- kosiarka Einhell
- kosiarka Grundig
- kosiarka Remington
- kosiarka Hyundai
- kosiarka Rowenta
- kosiarka Mesko
- kosiarka Husqvarna
- kosiarka ECG
- kosiarka Makita
- kosiarka Hecht
- kosiarka Viking
- kosiarka Rapid
- kosiarka Ozito
- kosiarka Draper
- kosiarka Fuxtec
- kosiarka Trisa
- kosiarka RYOBI
- kosiarka NAC
- kosiarka Wolf Garten
- kosiarka Zelmer
- kosiarka Eurogarden
- kosiarka Cobra
- kosiarka Handy
- kosiarka Yard Force
- kosiarka Garden Feelings
- kosiarka Baumr-AG
- kosiarka Sovereign
- kosiarka CMI
- kosiarka SABO
- kosiarka Beper
- kosiarka Kubota
- kosiarka Sterwins
- kosiarka Meec Tools
- kosiarka AL-KO
- kosiarka Güde
- kosiarka Pyle
- kosiarka Segway
- kosiarka Texas
- kosiarka Wahl
- kosiarka Bavaria
- kosiarka Cecotec
- kosiarka AFK
- kosiarka Zipper
- kosiarka Camry
- kosiarka Flymo
- kosiarka Scarlett
- kosiarka TriStar
- kosiarka MTD
- kosiarka Fiskars
- kosiarka Florabest
- kosiarka Hanseatic
- kosiarka Solo
- kosiarka Ferrex
- kosiarka Ergotools Pattfield
- kosiarka Clatronic
- kosiarka NEO Tools
- kosiarka Oregon Scientific
- kosiarka Rover
- kosiarka Princess
- kosiarka GA.MA
- kosiarka Ferm
- kosiarka Hitachi
- kosiarka Moser
- kosiarka Craftsman
- kosiarka EcoFlow
- kosiarka Robomow
- kosiarka Fieldmann
- kosiarka Homelite
- kosiarka Gardenline
- kosiarka PowerPlus
- kosiarka Vonroc
- kosiarka Tesco
- kosiarka Spear & Jackson
- kosiarka HiKOKI
- kosiarka McCulloch
- kosiarka Becken
- kosiarka OKAY
- kosiarka Masport
- kosiarka Powerbase
- kosiarka Zoofari
- kosiarka Toro
- kosiarka Cotech
- kosiarka Skil
- kosiarka Snow Joe
- kosiarka Greenworks
- kosiarka Yellow Garden Line
- kosiarka OBH Nordica
- kosiarka Challenge
- kosiarka Alpina
- kosiarka Ambrogio
- kosiarka AS Motor
- kosiarka Walker
- kosiarka Saturn
- kosiarka ACG
- kosiarka Oster
- kosiarka Jata
- kosiarka Logik
- kosiarka Sun Joe
- kosiarka Termozeta
- kosiarka Eldom
- kosiarka Tanaka
- kosiarka Hustler
- kosiarka Troy-Bilt
- kosiarka Topcraft
- kosiarka Gamma
- kosiarka John Deere
- kosiarka Aqua Joe
- kosiarka Kress
- kosiarka Dolmar
- kosiarka Team
- kosiarka Mountfield
- kosiarka McGregor
- kosiarka Qualcast
- kosiarka Varo
- kosiarka Pattfield
- kosiarka Defort
- kosiarka IKRA
- kosiarka JCB
- kosiarka Kibani
- kosiarka Coline
- kosiarka Eliet
- kosiarka VARI
- kosiarka Klippo
- kosiarka Carmen
- kosiarka Valera
- kosiarka Hayter
- kosiarka Gianni Ferrari
- kosiarka Ariens
- kosiarka Grouw
- kosiarka Lumag
- kosiarka McConnel
- kosiarka Gtech
- kosiarka Graphite
- kosiarka Snapper
- kosiarka Levita
- kosiarka Efco
- kosiarka Blackline
- kosiarka Brill
- kosiarka Gardol
- kosiarka Gartenmeister
- kosiarka Plantiflor
- kosiarka Lux Tools
- kosiarka Orec
- kosiarka Scotts
- kosiarka Chapin
- kosiarka Germania
- kosiarka Anova
- kosiarka Hurricane
- kosiarka Budget
- kosiarka Fleurelle
- kosiarka Deltafox
- kosiarka Palmera
- kosiarka Yardforce
- kosiarka Murray
- kosiarka PLUS
- kosiarka PowerG
- kosiarka LEA
- kosiarka Yamabiko
- kosiarka Jacobsen
- kosiarka Exgain
- kosiarka Stabilo
- kosiarka Robot Mower
- kosiarka Garden
- kosiarka Toledo
- kosiarka Practixx
- kosiarka Belrobotics
- kosiarka Mr Gardener
- kosiarka Einhell Royal
- kosiarka Ransomes
- kosiarka Kingcraft
- kosiarka Mac Allister
- kosiarka Jonsered
- kosiarka Gude Pro
- kosiarka Green Technology
- kosiarka Do It Garden
- kosiarka Victa
- kosiarka Robust
- kosiarka Ultranatura
- kosiarka Shav
- kosiarka LawnMaster
- kosiarka G-Technology
- kosiarka Morrison
- kosiarka Cub Cadet
- kosiarka Maxbear
- kosiarka Lawn Star
Najnowsze instrukcje dla kosiarka
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
14 Października 2024
13 Października 2024
11 Października 2024
11 Października 2024
9 Października 2024