Instrukcja obsługi Earthwise CVP41810

Earthwise kosiarka CVP41810

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Earthwise CVP41810 (42 stron) w kategorii kosiarka. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/42
OPERATOR’S MANUAL
ELECTRIC CONVERTIBLE 4 1 COMBO IN
CHAIN SAW/ POLE SAW/ HEDGE TRIMMER/ POLE HEDGE TRIMMER
This product is covered by U.S. patents and other international patents
Copyright. All Rights Reserved.
This product has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before
using this product.
Thank you for your purchase.
DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING, ASSEMBLY, PARTS, SERVICE QUESTIONS?
CALL 1- - -5111 BETWEEN 7:30 AM 4:30 PM EST FOR ASSISTANCE. 800 313 —
SAVE THIS MANUAL FOR FUTURE REFERENCE
Model CVP41810
IMPORTANT SAFETY WARNINGS
TO REDUCE RISK OF INJURY:
Before any use, be sure everyone using this tool reads and
understands all safety instructions and other information contained
in this manual.
CAUTION: Wear appropriate personal hearing protection during
use. Under some conditions and duration of use, noise from this
product may contribute to hearing loss.
Save these instructions and review frequently prior to use and in
instructing others.
WARNING: When using electric gardening appliances, basic safety
precautions should always be followed to reduce risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS
2
DON’T ABUSE CORD: Never carry this product by cord or yank it
to disconnect from receptacle. Keep cord from heat, oil and sharp
edges.
KEEP CHILDREN AWAY - All visitors, children and pets should
stay at a safe distance from the work area.
DRESS PROPERLY – Don’t wear loose clothing or jewelry. Wear
protective hair covering to contain long hair. They can be caught in
moving parts. Use of rubber gloves and substantial footwear is
recommended when working outdoors.
USE SAFETY GLASSES –Wear safety glasses with side shields or
goggles that are marked to comply with ANSI Z87.1 standard when
operating this product. Use face or dust mask if environment is dusty.
GROUND FAULT CIRCUIT INTERRUPTER (GFCI) protection
should be provided on the circuit( s) to be used. Receptacles are
available having built-in GFCI protection and may be used.
EXTENSION CORD. Make sure your extension cord is in good
condition. When using an extension cord, be sure it is heavy enough
to carry the current your product will draw. An undersized extension
cord will cause a drop in line voltage resulting in loss of power
and overheating. The following table shows the correct size to use
depending on cord length and nameplate ampere rating. If in doubt,
use the next heavier gage. The smaller the gage number, the
heavier the cord.
WARNING: Use out door extension cords marked SW-A, SOW-A,
STW-A, SJW-A, or SJTW-A. These cords are rated for outdoor use
and reduce the risk of electric shock.
DOUBLE INSULATION—Double Insulation is a concept in safety in
electric power tools, which eliminates the need for the usual three-
wire grounded power cord. All exposed metal parts are isolated from
the internal metal motor components with protecting insulation.
Double insulated tools do not need to be grounded.
NOTE: The double insulated system is intended to protect the user
from shock resulting from a break in the tool’s internal insulation.
Observe all normal safety precautions to avoid electrical shock.
It is possible to tie the extension cord and power cord
in a knot to prevent them from becoming disconnected
during use. Make the knot as shown, then connect the
plug end of the power cord into the receptacle end of
the extension cord,. This method can also be used to
tie two extension cords together.
POLARIZED PLUGS—To reduce the risk of electric shock, this
equipment has a polarized plug (one blade is wider than the other).
This equipment must be used with a suitable polarized 2 wire or 3
wire extension cord. Polarized connections will fit together only one
way. Make sure that the receptacle end of the extension cord has
large and small blade slot widths. If the plug does not fit fully into the
extension cord, reverse the plug. If it still does not fit obtain a suit-
able extension cord. If the extension cord does not fit fully into the
outlet, contact a qualified electrician to install the proper outlet. Do
not change the tool plug or extension cord in any way.
USE RIGHT APPLIANCE – Do not use an appliance for any job
except that for which it is intended.
DISCONNECT the product from the power supply when not in use
or when servicing or cleaning. Do not leave unattended.
CHECK DAMAGED PARTS – Before further use of the tools, a
guard or other part that is damaged should be carefully checked to
determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting and any other condition that
may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced. Call our customer service
help line at 1-800-313-5111 for assistance.
LIGHTING - Only operate the product in daylight or good artificial
light.
DON’T OVERREACH – Keep proper footing and balance at all
times.
WARNING: Do Not use the tool with any type of accessory or
attachment not provided. Such usage might be hazardous.
AVOID DANGEROUS ENVIRONMENTS – Don’t use the product
in rain, damp or wet locations. Do not operate product in gaseous
or explosive atmospheres. Motors in these tools normally spark,
and the sparks might ignite fumes.
AVOID UNINTENTIONAL STARTING – Don’t carry the product
with finger on switch. Be sure switch is off before plugging in.
DANGER: Risk of cut. Keep hands away from the blades. Keep
both hands on handles when power is on.
DANGER: DO NOT ATTEMPT to remove cut material or hold
material to be cut when blades are moving. Make sure the switch
is off when clearing jammed material from blades. Do not grasp
the exposed cutting blades or cutting edges when picking up or
holding the tools.
CAUTION: Blades coast after turned off.
DON’T FORCE THE
PRODUCT – It will do the job better and with
less likelihood of a risk of injury at the rate for which it was
designed.
STAY ALERT – Watch what you are doing. Use common sense.
Do not operate the product when you are tired or under the
influence of drugs, alcohol or medications.
STORE IDLE PRODUCT INDOORS – When not in use, the
product should be stored indoors in a dry and high or locked-up
place, out of reach of children.
MAINTAIN PRODUCT WITH CARE
– Keep cutting blades sharp
and clean for best performance and to reduce the risk of injury.
Inspect extension cord periodically and replace if damaged. Keep
handles dry, clean and free from oil and grease.
WARNING: California Proposition 65: This product contains
chemicals known to the State of California to cause cancer, birth
defects or other reproductive harm.
WARNING: Some dust and debris created by this tool could
contain chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm. Some examples
of these chemicals are:
-chemicals in fertilizers
-compounds in insecticides, herbicides and pesticides
-arsenic and chromium from chemically treated lumber
Your risk of exposure to these chemicals varies depending on how
often you do this type of work. To reduce your exposure, work in a
well ventilated area and with approved safety equipment such as
dust masks that are specially designed to filter out microscopic
particles.
Minimum Gage for Cord Sets
Volts Total Length of cord in Feet
120V 0-25 26-50 51-100 101-150
Ampere Rating
More Not More American wire Gage
Than Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 Not Recommended
Steel Blade Support - Hardened Steel Blades - Telescopic Pole Blade Guard - Bar Cover -
PRODUCT SPECIFICATIONS
CVP41810
Pole/ Chain Saw Pole/ Hedge Trimmer
Input….………………………….….……..1 ………………….….…………….…….120V, 60Hz, 7A, AC Only 20V, 60Hz, 4.5A, AC Only
Speed ………………………..……………...…………………...12m/s ……………………………………….……….3200 Strokes per Min.
Bar Length ……………………………...…...……..10 in. …………………………………………….……………………..18 in.Oregon Bar
Extended Length …………...………………..………...…………. 8 ft. ……………………………………………….………….……….8.8 ft.
Max. Cut …………..………...………………..………...…………………..…………………………………………….………….……….0.7 in.
Weight Ibs ……………………………….……………………….10.27 . ………………………………………………………………..…9.7 lbs.
3
Chain
Guide Bar
Hand Guard/ Chain Brake
Front Handle
Oil Tank Cap
Quick Release Button
Tension Knob
Quick Release Button
Guard
Front Handle/Safety Switch
Cutter Blade
Shoulder Strap
Quick Release Button
Locking Collar Angle Adjustment Button
Safety Button
Trigger Switch
Bar Cover
Blade Cover
Chain Cover

Specyfikacje produktu

Marka: Earthwise
Kategoria: kosiarka
Model: CVP41810

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Earthwise CVP41810, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kosiarka Earthwise

Earthwise

Earthwise LST02010 Instrukcja

25 Września 2024
Earthwise

Earthwise CVP41810 Instrukcja

25 Września 2024
Earthwise

Earthwise ST00090 Instrukcja

25 Września 2024
Earthwise

Earthwise BVM22012 Instrukcja

25 Września 2024
Earthwise

Earthwise PS44008 Instrukcja

25 Września 2024
Earthwise

Earthwise CVPS43010 Instrukcja

25 Września 2024
Earthwise

Earthwise TC7012EW Instrukcja

25 Września 2024
Earthwise

Earthwise TC70090EW Instrukcja

25 Września 2024
Earthwise

Earthwise TC70025 Instrukcja

25 Września 2024
Earthwise

Earthwise BLR20075 Instrukcja

25 Września 2024

Instrukcje kosiarka

Najnowsze instrukcje dla kosiarka

Hecht

Hecht 5564 SX Instrukcja

15 Października 2024
Craftsman

Craftsman 25365 Instrukcja

15 Października 2024
AL-KO

AL-KO Solo 4758 VSI Instrukcja

15 Października 2024
AL-KO

AL-KO Classic 4.64 SP-S Instrukcja

15 Października 2024
Gardena

Gardena PowerMax 36 A Li Instrukcja

15 Października 2024
Einhell

Einhell BG-PM 46 Instrukcja

14 Października 2024
Stihl

Stihl RMA 235 Instrukcja

13 Października 2024
Einhell

Einhell GC-PM 46 S Instrukcja

11 Października 2024
BaByliss

BaByliss Pro FX660E Instrukcja

11 Października 2024
Conair

Conair HC108RGB Instrukcja

9 Października 2024