Instrukcja obsługi E-Blox Circuit Blox 120
E-Blox
Budowa modelu
Circuit Blox 120
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla E-Blox Circuit Blox 120 (72 stron) w kategorii Budowa modelu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/72
WARNING: Always check your wiring before turning on a circuit. Never leave a circuit
unattended while the batteries are installed. Never connect additional batteries or any
other power sources to your circuits. Discard any cracked or broken parts.
Adult Supervision:
Because children’s abilities vary so much, even with age groups, adults should exercise
discretion as to which experiments are suitable and safe (the instructions should enable
supervising adults to establish the experiment’s suitability for the child). Make sure your
child reads and follows all of the relevant instructions and safety procedures, and keeps
them at hand for reference.
This product is intended for use by adults and children who have attained sufcient
maturity to read and follow directions and warnings.
Never modify your parts, as doing so may disable important safety features in them, and
could put your child at risk of injury.
FCC Notice: Please note that changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment
and receiver. • Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
-1-
Never connect E-Blox® Circuit
Blox™ to the electrical outlets in
your home in any way!
Only use the battery holder with
the cover securely in place.
Small parts. Not for children
under 3 years.
Do not touch the fan while it is
spinning.
WARNING:
SHOCK HAZARD
WARNING:
CHOKING HAZARD
WARNING:
MOVING PARTS
WARNING:
!
!
!
Batteries:
lUse only 1.5V “AA” type, alkaline batteries (not
included).
lInsert batteries with correct polarity.
l Non-rechargeable batteries should not be
recharged.
lRechargeable batteries should only be charged
under adult supervision, and should not be
recharged while in the product.
lDo not mix old and new batteries.
lDo not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
lRemove batteries when they are used up.
lDo not short circuit the battery terminals.
lNever throw batteries in a re or attempt to
open its outer casing.
lBatteries are harmful if swallowed, so keep away
from small children.
!
1. Most circuit problems are due to incorrect assembly, always double-check that your circuit exactly matches
the drawing for it.
2. Be sure that parts with positive/negative markings are positioned as per the drawing.
3. Be sure that all connections are securely made.
4. Try replacing the batteries. Note: Rechargeable batteries do not work as well as alkaline batteries.
E-Blox
®
is not responsible for parts damaged due to incorrect wiring.
Basic Troubleshooting
Note: If you suspect you have damaged parts, you can follow the Advanced
Troubleshooting procedure on page 15 to help determine which ones need replacing.
-2-
Specyfikacje produktu
| Marka: | E-Blox |
| Kategoria: | Budowa modelu |
| Model: | Circuit Blox 120 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z E-Blox Circuit Blox 120, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Budowa modelu E-Blox
17 Września 2024
Instrukcje Budowa modelu
- Budowa modelu Lego
- Budowa modelu Voltcraft
- Budowa modelu Chicco
- Budowa modelu Revell
- Budowa modelu Playmobil
- Budowa modelu Viessmann
- Budowa modelu Carson
- Budowa modelu Heller
- Budowa modelu Trix
- Budowa modelu Reely
- Budowa modelu Tams Elektronik
- Budowa modelu BRIO
- Budowa modelu ISDT
- Budowa modelu Multiplex
- Budowa modelu Wilesco
- Budowa modelu Marklin
- Budowa modelu Kibri
- Budowa modelu Mega Bloks
- Budowa modelu KidKraft
- Budowa modelu Geomag
- Budowa modelu Robbe
- Budowa modelu LGB
- Budowa modelu Woodland Scenics
- Budowa modelu Pocher
- Budowa modelu Wiking
- Budowa modelu MBZ
- Budowa modelu FALLER
- Budowa modelu Metal Earth
- Budowa modelu Piko
- Budowa modelu Fleischmann
- Budowa modelu Roco
- Budowa modelu SAB Heli Division
- Budowa modelu Proses
- Budowa modelu Brawa
- Budowa modelu NOCH
- Budowa modelu Massoth
- Budowa modelu Italeri
Najnowsze instrukcje dla Budowa modelu
14 Października 2024
9 Października 2024
Italeri Scania R730 V8 Streamline ‘‘Silver Griffin’’ Instrukcja
8 Października 2024
8 Października 2024
8 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
5 Października 2024
5 Października 2024