Instrukcja obsługi Dymond Wireless speaker with led light

Dymond Głośniki Wireless speaker with led light

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Dymond Wireless speaker with led light (13 stron) w kategorii Głośniki. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/13
-1-
USER’S MANUAL
-2-
DECLARATION OF CONFORMITY
Hereby,
Par la présente,
Company:
Entreprise: TE-GROUP nv
Address:
Adresse: Kapelsestraat 61, 2950 Kapellen - BELGIUM
declare that the following equipment:
déclare que le dispositif suivant :
Product name:
Nom du produit: DYMOND LED-BEAT
Product type:
Type de produit: Bluetooth® Stereo Speaker
conforms with the following safety requirements of the directives 2014/30/EU,
2014/35/EU, 2014/53/EU & 2011/65/EU. Conformity is guaranteed by the
CE-symbol.
est conforme aux exigences de sécurité des directives 2014/30/EU,
2014/35/EU, 2014/53/EU & 2011/65/EU. La conformité est garantie par
le symbole CE.
This product has been tested against following standards and specica-
tions, applying versions valid on the date is was issued.
Ce produit a été testé par rapport aux normes et spécications suivantes,
appliquant les versions valables à la date de sa délivrance.
EN 60950-1 · 2006 + A11:2009 + A1:2010 + A12:2011
ETSI EN 300 328 V1.8.1
ETSI EN 301 487-1 V1.9.2 (2011-09)
ETSI EN 301 487-17 V2.2.1 (2012-09)
Joseph van Oosterum, CEO TE Group NV, April 2016
ILLUSTRATION
1
12
1110
9
8765
432
------------------------ LED-BEAT/11-16/V01-----------------------
Copyright © Dymond
-3-
HOW TO USE THE DYMOND LED-BEAT?
The LED-BEAT can be used stand-alone, using the
rechargeable battery and can be controlled using the buttons on the main unit.
The LED-BEAT is:
Bluetooth® Speaker
Music player with AUX / USB / TF input
FM-radio
Handsfree calling
PARTS & BUTTONS
1. - Short press: Search for radio stations in FM mode
- Short press: Play/Pause the music
- Short press: Answer/end call during handsfree calling
- Press 2x: Redial last number
- Long press: Turn ON/OFF LED lights
2. - Short press: Mode selection
3. - Short press: Go to previous track / FM station
- Long press: Decrease the volume
4. - Short press: Go to next track / FM station
- Long press: Increase the volume
5. Micro USB charging slot
6. ON/OFF switch
7. Micro SD/TF card input slot
8. USB input slot
9. AUX input port
10. Micro USB charging cable
11. AUX cable
12. LED indicator
CHARGING THE BATTERY
! The LED-BEAT must be fully charged before rst use!
1. Plug the micro USB cable (10) into the micro USB charging socket
(5). Plug the other end of the USB cable (10) into your computer
or USB travel charger (not included). It is recommended to charge
the speaker when it is turned OFF, to maximize battery life.
2. The red LED indicator (12) at the back of the LED-BEAT will light
up and your device will start charging. When the battery is fully
charged, the LED indicator (12) will turn off.
3. When the battery capacity is low, you will hear a beep.
The LED-BEAT battery offers up to 6 hours wireless music time. Music
time may vary from usage (volume + LED lights ON/OFF).
TURNING ON / OFF
Turning ON: Slide the ON/OFF switch (6) to ON position.
Turning OFF: Slide the ON/OFF switch (6) to OFF position.
VOLUME
Long press I<< (3) to decrease the volume. Long press >>I (4) to increase the
volume. When minimum/maximum volume is reached, you will hear a beep.
MODE SELECTION
Press M (2) to switch between Bluetooth® and FM mode.
AUX mode is only available after connecting the AUX cable (11) to the
AUX input port (9).
USB mode and TF/SD card mode are activated automatically when
inserting a USB device or SD/TF card into the corresponding slot.
BLUETOOTH® MODE
A. PAIRING
1. Bluetooth® mode is activated automatically when turning ON the
unit. You will hear “Bluetooth® mode”.
2. Let your phone search for Bluetooth® devices. Select “DYM
LEDbeat” to pair both devices. You will hear a beep. You can now
use you LED-BEAT to listen to your favorite music wirelessly.
To ensure automatic reconnection between the phone and the LED-
BEAT, we recommend setting the LED-BEAT as “Authorized” in the
Bluetooth® menu of your phone! Please refer to the manual of your
mobile phone for more detailed information.
GB

Specyfikacje produktu

Marka: Dymond
Kategoria: Głośniki
Model: Wireless speaker with led light

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Dymond Wireless speaker with led light, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Głośniki Dymond

Dymond

Dymond Wireless speaker with led light Instrukcja

27 Września 2024

Instrukcje Głośniki

Najnowsze instrukcje dla Głośniki

Steren

Steren SPK-1100BL Instrukcja

15 Października 2024
Pyle

Pyle PBMSPG6 Instrukcja

14 Października 2024
Marshall

Marshall Tufton Instrukcja

14 Października 2024
Sunstech

Sunstech SPUBT780 Instrukcja

14 Października 2024
Definitive Technology

Definitive Technology Mythos XTR-50 Instrukcja

14 Października 2024
Wharfedale

Wharfedale Diamond 8.2 Pro Instrukcja

14 Października 2024
Bang & Olufsen

Bang & Olufsen BeoLab Penta Instrukcja

13 Października 2024
Marquant

Marquant 002-222 Instrukcja

13 Października 2024
Naxa

Naxa NAS-3060 Instrukcja

13 Października 2024
Philips

Philips SPA1301 Instrukcja

13 Października 2024