Instrukcja obsługi DoorBird D1101UV - IP Video Door Station

DoorBird D1101UV - IP Video Door Station

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DoorBird D1101UV - IP Video Door Station (28 stron) w kategorii . Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
1
Page 2-12
Installation Manual
IP Video Door Station
D1101UV
Seite 13-24
Installationsanleitung
IP Video Türstation
D1101UV
VERSION ., MIN. HW .
D1101UV
2
INSTALLATION MANUAL
Read these instructions carefully before starting to
use any components. Keep the manual so you can
refer to it at a later date if required. If you hand over
the device to other persons for use, please hand over
the operating manual as well.
You can always find the most up-to-date version
of the installation manual on www.doorbird.com/
support
To make things easier we use the term “device” for
the product “IP Video Door Station D11x series” and
“mobile device” for a smartphone or tablet.
Liability
Every care has been taken in the preparation of this
document. Please inform Bird Home Automation
GmbH of any inaccuracies or omissions. Bird Home
Automation GmbH cannot be held responsible for any
technical or typographical errors and reserves the right
to make changes to the product and manuals without
prior notice. Bird Home Automation GmbH makes
no warranty of any kind with regard to the content
of this document, including, but not limited to, the
implied warranties of merchantability and fitness for
a particular purpose. Bird Home Automation GmbH
shall neither be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no components that require service by the user.
Unauthorized equipment changes or modifications
will invalidate all applicable regulatory certifications
and approvals.
Symbols used
Caution: Indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
Danger: Indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
Warning: Indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
Notice: Indicates a situation which, if not
avoided, could result in damage to property.
Note: Indicates useful information which
helps in getting the most out of the product.
NOTICE
Important: Indicates significant information
which is essential for the product to function
correctly.
Hazard information
• Mounting, installation and servicing work on
electrical devices may only be performed by
a qualified eletrician. Failure to observe this
regulation could result in the risk of serious
damage to health or fatal injury due to electric
shocks.
• Devices with 110-240 V connection: The device
may only be connected to an easily accessible
power socket outlet. The mains adapter must
be pulled out if a hazard occurs.
• For power supply, only use the original plug-
in mains adapter delivered with the device,
separately available DIN rail power supplies
or a recommended PoE-Switch/PoE-Injector
as specified in this manual.
• Because of electrostatic charging, direct
contact with the circuit board can result in
destruction of the device. Direct contact with
the circuit board must therefore be avoided
at any time.
• Observe the EN 60065 resp. EN 60950 resp.
EN 62368 standard.
• Do not use the device if there are signs of
damage to the housing, control elements
or connecting sockets, for example, or if it
demonstrates a malfunction. If you have any
doubts, please have the device checked by
an authorized expert.
• Do not open the device. This voids the
warranty of the device. The device does not
contain any parts that can be maintained by
the user. In the event of an error, please have
the device checked by an authorized expert.
• For safety, approval and licensing reasons
(CE/FCC/IC etc.), unauthorized change and/or
modification of the device is not permitted.
• The device is not a toy: do not allow babies
and children to play with it.
• To avoid the danger of suffocation, keep
any packing materials away from babies
and children. Plastic films/bags, pieces of
polystyrene, etc. are not a toy and can be
dangerous in the hands of a child. Discard any
packing materials immediately after removing
the product. Do not reuse packing materials.
• Always lay cables in such a way that they do
not become a risk to people and domestic
animals.
• Voltage is applied to parts within the
equipment. Do not touch any parts that are
WARNING
ENGLISH
3
not associated with the installation, wiring, or
connection. Electric shock could result.
• On devices which are not marked as weather-
proof: Keep the device away from water or any
other liquid.
• Do not install or make any wire terminations
while power supply is plugged in. It can cause
eletric shock or damage to the device.
• Before turning on power, make sure wires are
not crossed or shorted. If not, fire or eletric
shock could result.
• High voltage may be present internally. Do not
open the device. Electric shock could result.
• The device is not of explosion-proof. Do
not install or use near gases or flammable
materials. Fire or explosion could result.
• Do not install two power supplies in parallel
to a single input. Fire or damage to the device
could result. Be sure to connect a single power
supply to the device.
• Do not connect any terminal on the device to
an AC power line. Fire or electric shock could
result.
• Keep AC cord from being marred or crushed.
If the AC cord is fractured, fire or electric shock
could result.
• Do not plug or unplug with wet hands. Electric
shock could result.
• Do not put any metal or flammable material
into the device. Fire, electric shock, or device
trouble could result.
• Existing wiring may contain high voltage AC
electricity. Damage to the device or electric
shock could result. Wiring and installation
must be done by a qualified eletrician.
• When mounting the device on a wall or
ceiling, install the device in a convenient
location, but not where it could be jarred or
bumped. Injury could result.
• On devices with ground terminals, connect to
an earth ground. Otherwise fire or malfunction
could result.
• On devices with plastic or real glass, do not put
high pressure on the glass. If fractured, injury
could result.
• On devices with LCD, if LCD is punctured, do
not allow contact with the liquid crystal inside.
Injury could result. If necessary, gargle your
mouth and clean your eyes or skin with clear
water for at least 15 minutes and consult your
doctor.
• Do not put anything on the device or cover
the device with cloth, silicone, glue, coating,
separate covering etc. Fire or device issues
WARNING
could result.
• Do not install the device in any of the following
locations. Fire, electric shock, or device trouble
could result.
Places under direct sunlight or places near
heating equipment that varies in temperature.
Places subject to dust, oil, chemicals, hydrogen
sulfide (hot spring).
Places subject to moisture and humidity
extremes, such as bathrooms, cellars,
greenhouses, etc.
Places where the temperature is very low, such
as inside a refrigerated area or in front of an air
conditioner.
Places subject to steam or smoke (e.g. near
heating or cooking surfaces).
Where noise generating devices such as
dimmer switches or inverter electrical
appliances are closeby.
Locations subject to frequent vibration or
impact.
• On devices with intercom, be sure to perform
a call test with low audio volume on both
intercom devices. A sudden call etc. may arrive
causing for example damage to your ear.
• If the device does not operate properly, unplug
the power supply.
• All devices which are not marked as weather-
proof are designed for indoor use only. Do not
use outdoor.
• On devices which are marked weather-proof:
Do not spray with high-pressure water. Device
issues could result.
• We do not assume any liability for damage to
property or personal injury caused by improper
use or the failure to observe the hazard
information. In such cases, any claim under
warranty ceases. For consequential damages,
we assume no liability!
Safety instructions
• The device shall be used in compliance with
local laws and regulations.
• Store the device in a dry and ventilated
environment.
• Avoid exposing the device to shocks or heavy
pressure.
• Do not install the device on unstable brackets,
surfaces or walls. Make sure the material is
strong enough to support the weight of the
device.
NOTICE

Specyfikacje produktu

Marka: DoorBird
Kategoria:
Model: D1101UV - IP Video Door Station

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DoorBird D1101UV - IP Video Door Station, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje DoorBird

DoorBird

DoorBird A1091 Series Instrukcja

22 Września 2024
DoorBird

DoorBird D1101UV - IP Video Door Station Instrukcja

11 Września 2024
DoorBird

DoorBird A1121 Series IP Access Control Device Instrukcja

6 Września 2024
DoorBird

DoorBird D301x Series - Door Intercom IP Upgrade Instrukcja

4 Września 2024

Instrukcje

Najnowsze instrukcje dla

Jawbone

Jawbone Jambox Instrukcja

15 Października 2024
Jawbone

Jawbone Up2 Instrukcja

15 Października 2024
Kundo XT

Kundo XT CO2 Control Instrukcja

5 Października 2024
Univers By FTE

Univers By FTE U5000 Instrukcja

5 Października 2024
Onbekend

Onbekend AXHW-20a-xxx Instrukcja

28 Września 2024
Home Electronic

Home Electronic he 800m wh Instrukcja

28 Września 2024
Onbekend

Onbekend K3 IR thermometer Instrukcja

28 Września 2024
Home Electronic

Home Electronic br 660 Instrukcja

28 Września 2024
Home Electronic

Home Electronic Freezz 12000M Instrukcja

28 Września 2024
Onbekend

Onbekend TF-600 Non Contact Thermometer Instrukcja

28 Września 2024