Instrukcja obsługi DoorBird A1121 Series IP Access Control Device

DoorBird A1121 Series IP Access Control Device

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DoorBird A1121 Series IP Access Control Device (64 stron) w kategorii . Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/64
1
Page 2-16
Installation Manual
IP Access Control Device
A1121 Series
Seite 17-32
Installationsanleitung
IP Zutrittskontrollgerät
A1121 Serie
VERSION ., MIN. HW .
A1121
Page 33-48
Manuel d‘installation
Système de contrôle
d‘accès IP
Série A1121
Páginas 49-63
Manual de instalación
Sistema de control
de acceso IP
Serie A1121
2
INSTALLATION MANUAL
Read these instructions carefully before starting to use
any components. Keep the manual so you can refer
to it at a later date if required. If you hand over the
device to other persons for use, please hand over the
operating manual as well.
You can always find the most up-to-date version of the
installation manual on www.doorbird.com/support
To make things easier we use the term “device” for the
product “IP Access Control Device A1121” and “mobile
device” for a smartphone or tablet.
Liability
Every care has been taken in the preparation of this
document. Please inform Bird Home Automation
GmbH of any inaccuracies or omissions. Bird Home
Automation GmbH cannot be held responsible for any
technical or typographical errors and reserves the right
to make changes to the product and manuals without
prior notice. Bird Home Automation GmbH makes
no warranty of any kind with regard to the content
of this document, including, but not limited to, the
implied warranties of merchantability and fitness for
a particular purpose. Bird Home Automation GmbH
shall neither be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no components that require service by the user.
Unauthorized equipment changes or modifications
will invalidate all applicable regulatory certifications
and approvals.
Symbols used
Danger: Indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
Warning: Indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.
Caution: Indicates a hazardous situation
which, if not avoided, could result in minor or
moderate injury.
NOTICE Notice: Indicates a situation which, if not
avoided, could result in damage to property.
Important: Indicates significant information
which is essential for the product to function
correctly.
Note: Indicates useful information which
helps in getting the most out of the product.
Mounting, installation and servicing work on
electrical devices may only be performed by
a qualified eletrician. Failure to observe this
regulation could result in the risk of serious
damage to health or fatal injury due to electric
shocks.
Devices with 110-240 V connection: The device
may only be connected to an easily accessible
power socket outlet. The mains adapter must be
pulled out if a hazard occurs.
For power supply, only use the original plug-
in mains adapter delivered with the device,
separately available DIN rail power supplies or
a recommended PoE-Switch/PoE-Injector as
specified in this manual.
Because of electrostatic charging, direct contact
with the circuit board can result in destruction
of the device. Direct contact with the circuit
board must therefore be avoided at any time.
Observe the EN 60065 resp. EN 60950 resp. EN
62368 standard.
Do not use the device if there are signs of
damage to the housing, control elements
or connecting sockets, for example, or if it
demonstrates a malfunction. If you have any
doubts, please have the device checked by an
authorized expert.
Do not open the device. This voids the warranty
of the device. The device does not contain any
parts that can be maintained by the user. In
the event of an error, please have the device
checked by an authorized expert.
For safety, approval and licensing reasons (CE/
FCC/IC etc.), unauthorized change and/or
modification of the device is not permitted.
The device is not a toy: do not allow babies and
children to play with it.
To avoid the danger of suffocation, keep
any packing materials away from babies
and children. Plastic films/bags, pieces of
polystyrene, etc. are not a toy and can be
dangerous in the hands of a child. Discard any
packing materials immediately after removing
the product. Do not reuse packing materials.
Always lay cables in such a way that they do not
become a risk to people and domestic animals.
Voltage is applied to parts within the
equipment. Do not touch any parts that are
not associated with the installation, wiring, or
connection. Electric shock could result.
On devices which are not marked as weather-
proof: Keep the device away from water or any
other liquid.
Hazard information
WARNING
ENGLISH
3
Do not install or make any wire terminations
while power supply is plugged in. It can cause
eletric shock or damage to the device.
Before turning on power, make sure wires are
not crossed or shorted. If not, fire or eletric
shock could result.
High voltage may be present internally. Do not
open the device. Electric shock could result.
The device is not of explosion-proof. Do
not install or use near gases or flammable
materials. Fire or explosion could result.
Do not install two power supplies in parallel
to a single input. Fire or damage to the device
could result. Be sure to connect a single power
supply to the device.
Do not connect any terminal on the device to
an AC power line. Fire or electric shock could
result.
Keep AC cord from being marred or crushed.
If the AC cord is fractured, fire or electric shock
could result.
Do not plug or unplug with wet hands. Electric
shock could result.
Do not put any metal or flammable material
into the device. Fire, electric shock, or device
trouble could result.
Existing wiring may contain high voltage AC
electricity. Damage to the device or electric
shock could result. Wiring and installation
must be done by a qualified eletrician.
When mounting the device on a wall or
ceiling, install the device in a convenient
location, but not where it could be jarred or
bumped. Injury could result.
On devices with ground terminals, connect to
an earth ground. Otherwise fire or malfunction
could result.
On devices with plastic or real glass, do not put
high pressure on the glass. If fractured, injury
could result.
On devices with LCD, if LCD is punctured, do
not allow contact with the liquid crystal inside.
Injury could result. If necessary, gargle your
mouth and clean your eyes or skin with clear
water for at least 15 minutes and consult your
doctor.
Do not put anything on the device or cover
the device with cloth, silicone, glue, coating,
separate covering etc. Fire or device issues
could result.
Do not install the device in any of the following
locations. Fire, electric shock, or device trouble
could result.
Places under direct sunlight or places near
heating equipment that varies in temperature.
Places subject to dust, oil, chemicals, hydrogen
sulfide (hot spring).
Places subject to moisture and humidity
extremes, such as bathrooms, cellars,
greenhouses, etc.
Places where the temperature is very low, such
as inside a refrigerated area or in front of an air
conditioner.
Places subject to steam or smoke (e.g. near
heating or cooking surfaces).
Where noise generating devices such as
dimmer switches or inverter electrical
appliances are closeby.
Locations subject to frequent vibration or
impact.
On devices with intercom, be sure to perform
a call test with low audio volume on both
intercom devices. A sudden call etc. may arrive
causing for example damage to your ear.
If the device does not operate properly, unplug
the power supply.
All devices which are not marked as weather-
proof are designed for indoor use only. Do not
use outdoor.
On devices which are marked weather-proof:
Do not spray with high-pressure water. Device
issues could result.
We do not assume any liability for damage to
property or personal injury caused by improper
use or the failure to observe the hazard
information. In such cases, any claim under
warranty ceases. For consequential damages,
we assume no liability!
WARNING
Safety instructions
The device shall be used in compliance with
local laws and regulations.
Store the device in a dry and ventilated
environment.
Avoid exposing the device to shocks or heavy
pressure.
Do not install the device on unstable brackets,
surfaces or walls. Make sure the material is
strong enough to support the weight of the
device.
Use only applicable tools when installing the
device. Using excessive force with tools could
cause damage to the device.
Do not use chemicals, caustic agents, or
aerosol cleaners.
Use a clean dry cloth for cleaning.
NOTICE


Specyfikacje produktu

Marka: DoorBird
Kategoria:
Model: A1121 Series IP Access Control Device

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DoorBird A1121 Series IP Access Control Device, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje DoorBird

Instrukcje

Najnowsze instrukcje dla