Instrukcja obsługi Digital Watchdog NightWatch DW-ILPM1

Digital Watchdog Niesklasyfikowane NightWatch DW-ILPM1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Digital Watchdog NightWatch DW-ILPM1 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Pole–mount bracket for LED illuminators
DW-ILPM1
v
Attention: This document is intended to serve as a quick reference for initial setup.
It is recommended that the user read the entire instruction manual for complete and proper installation and usage.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources.
2. Search for your product by entering the part number in the search bar. Results Search by Product’
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will
appear in the results.
Quick Start Guide
WHAT’S IN THE BOX
1 x pole mount bracket
1 x pole clips
1 x quick setup guide
46-3595/(813)888-9555
m
port Hours: 9:00AM – 8 00PM
Rev Date: 08/19
Copyright © Digital Watchdog. All rights reserved.
Specification s and pricing are subject to change without notice.
Quick Start Guide
INSTALLING THE POLE MOUNT BRACKET
Single pole mount bracket is compatible with all DW® NightWatch™ illuminators including DW-ILWM1,
DW-ILWM2 and DW-ILWM3 mount brackets.
The pole mount bracket comes with stainless steel straps to fit 2.95” to 7.87” (7.5 to 20 cm) diameter poles.
LED ILLUMINATOR INSTALLATION WITH POLE MOUNT BRACKET
1 2
3
Place the bracket against the pole in the required position. Thread the steel straps through the slots
located in the bracket and tighten around the pole with a suitable wrench.
A single illuminator can be mounted to the bracket using M6 nuts and bolts. Vertical adjustment can be made
using the two hex bolts on each side of the illuminator. Mounting holes are also provided to pair with single
(DW-ILWM1), double (DW-ILWM2) and triple mounting (DW-ILWM3) brackets.
Pole moun]ng bracket compa]ble with all DW Infra-Red and White-Light illuminators including
WM1,DW-ILWM2andDW-ILWM3moun]ngbrackets.

mpa]ble with all DW Infra-Red and White-Light illuminators including
LWM3moun]ngbrackets.

Specyfikacje produktu

Marka: Digital Watchdog
Kategoria: Niesklasyfikowane
Model: NightWatch DW-ILPM1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Digital Watchdog NightWatch DW-ILPM1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Digital Watchdog

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024