Instrukcja obsługi Digital Watchdog DWC-PV20CMW


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Digital Watchdog DWC-PV20CMW (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Ceiling mount bracket for multi-sensor
vari-focal cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the search bar. Results ‘Search by Product
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
DWC-PV20CMW
WHATS IN THE BOX
Camera Mounting Screws 2 Mounting Pad 1
Screws and Plastic Anchors 4 Mounting Template 1
Hexagonal Wrench 1 1Quick Setup Guide
Safety Wire 1
1 Using the mounting template or the mounting bracket itself, mark and drill the necessary holes on the mounting surface.
2 Secure the mounting bracket base to the mounting surface using the screws and anchors that were included with the mount.
Use the mounting pad between the bracket’s arm and mounting surface as needed.
3 Connect the ceiling mount’s neck into the plate, and secure using the screws at the top of the neck. Use the hexagonal wrench
to secure the screws in place.
4
Connect the ceiling mount’s base into the neck, and secure using the screws at the bottom of the neck. Use the hexagonal
wrench to secure the screws in place.
5 Ax the safety wire at the bottom of the mounting bracket’s base. Connect the other side of the safety wire to the base of the
camera.
6
To mount the camera to the mounting accessory, remove the
dome from the camera base using the wrench included
with the camera.
NOTE: Do not touch the lenses when handling the camera modules.
7
Pass wires through and make all necessary connections.
8
Secure the camera to the mounting bracket using the included
screws. Align the indented lines on the side of the camera with
the lines on the mounting bracket as seen in the image below.
Rotate the camera clockwise to lock it into position.
UNLOCK LOCK
9
Adjust the camera module positions and angles, then
complete the installation by placing the dome cover on the
camera. Secure the dome cover to the camera base using the
screws included with the camera. See the camera’s QSG for
more information.
Quick Start Guide
Rev: 08/21
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
Ceiling mount
neck
Camera module
Camera dome cover
Ceiling mount
plate
Ceiling mount base


Specyfikacje produktu

Marka: Digital Watchdog
Kategoria: Niesklasyfikowane
Model: DWC-PV20CMW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Digital Watchdog DWC-PV20CMW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Digital Watchdog

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024