Instrukcja obsługi DeWalt DWE4559

DeWalt młynek DWE4559

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DeWalt DWE4559 (19 stron) w kategorii młynek. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/19

INSTRUCTION MANUAL

GUIDE D'UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTES ADVERTENCIA:

DE USAR EL PRODUCTO.

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-D WALT • www.dewalt.comE

DWX725

Heavy-Duty Work Stand

Établi industriel

Soporte de trabajo para trabajo pesado

English

DWX725 Heavy-Duty Work Stand

36" (920 mm)

FIG. 1

Components List

A. Beam

B. Carry handle

C. Release button

D. Leg lock lever

E. Transport latch

English

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR

ANY D

WALT TOOL, CALL US TOLL FREE AT: 1-800-4-D WALT E

(1-800-433-9258)

WARNING: For your own safety, read the work stand

instruction manual before using any accessory. Failure

to heed these warnings may result in personal injury and

serious damage to the work stand and the accessory. When

servicing this tool, use only identical replacement parts.

General Safety Instructions for Work

Stand

WARNING: To reduce the risk of personal injury:

• ALWAYS use eye protection. All users and bystanders must

wear eye protection that conforms to ANSI Z87.1.

• ALWAYS check the stability of the miter saw stand and the miter

saw attached to it before putting the stand or the saw into use

• DO NOT exceed the weight this stand can hold. The main

center beam of the work stand is designed to support 1000lbs.

(453.6kg.) safely in a work environment. It is unsafe to climb, sit

or stand on the stand.

• DO NOT modify or use stand for operations for which it is

unintended.

• DO NOT use the stand on uneven surfaces. The stand is

designed to be used on a flat, stable surface.

• DO NOT use on a slippery surface. The stand load capacity is

greatly reduced when used on slippery surfaces.

Components (Fig. 1)

WARNING: Never modify the stand or any part of it. Damage or

personal injury could result.

Refer to Figure 1 for Components List.

FIG. 2

Preparation (Fig. 2)

1. Place the work stand on the ground with the folded legs facing

up.

Definitions: Safety Guidelines

The definitions below describe the level of severity

for each signal word. Please read the manual and pay

attention to these symbols.

DANGER: Indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation

which, if not avoided, result in could death or serious injury.

CAUTION: Indicates a potentially hazardous situation

which, if not avoided, result in may minor or moderate

injury.

NOTICE: Indicates a practice not related to personal injury

which, if not avoided, result in may property damage.

Specyfikacje produktu

Marka:	DeWalt
Kategoria:	młynek
Model:	DWE4559
Kolor produktu:	Black, Yellow
Źródło zasilania:	Prąd przemienny
Wysokość produktu:	145 mm
Waga produktu:	5700 g
Poziom ciśnienia akustycznego:	96 dB
Regulowana prędkość:	Nie
Moc pobierana:	2400 W
Prędkość biegu jałowego (max):	6500 RPM
Długość produktu:	520 mm
Poziom mocy dźwięku:	107 dB
Liczba biegów:	1
Średnica tarczy szlifierki:	230 mm
Niepewność poziomu wibracji (szlifowanie):	1.5 m/s²
Dodatkowa rękojeść:	Tak
Blokada wrzeciona:	Tak
Osłona ochronna:	Tak
Klucz w zestawie:	Tak
Regulowana osłona:	Tak