Instrukcja obsługi Cotech 30-7901
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cotech 30-7901 (64 stron) w kategorii młynek. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/64
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen och spara den för
framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du bruker enheten
og oppbevar dem for senere bruk.
Tärkeätä tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Art.no. Model
18-3022 BDS46-UK
30-7901 BDS46
ENGLISHSVENSK ANORSKSUOMI
Belt Grinder
Bandslipmaskin
Båndslipemaskin
Nauhahiomakone
Ver. 200810
3
ENGLISH
Belt Grinder
Art. no: 18-3022 Model: BDS46-UK
30-7901 BDS46
Please read the entire instruction manual before using and save it for future use. We apologise for any text
or photo errors and any changes of technical data. If you have any questions concerning technical problems
please contact our Customer Service Department (see address on reverse).
General safety instructions
Warning! When using this tool fundamental safety measures must be observed to decrease the risk of re,
electric shock and personal injury. Read all of these instructions before using the product and save for
future reference.
1. Keep the workplace clean.
Cluttered areas and work tables could cause accidents.
2. Take the working environment into consideration.
- Do not expose the machine to rain.
- Do not use the machine in damp or wet areas.
- Keep the working area well-lit.
- Do not use the machine in the proximity of inammable liquids or gases.
3. Avoid electric shocks.
Avoid physical contact with earthed objects such as water pipes, radiators, kitchen cookers and fridges.
4. Keep everyone at a distance.
Do not let anyone, especially children, who is not participating in the work touch the tool or any of the
extensions. Keep everyone at a distance from the work place.
5. Store the machine in a safe place.
When the tool is not being used, store it in a dry, locked place out of the reach of children.
6. Do not force the machine.
It carries out the job more efciently and safely at the intended feed speed.
7. Use the correct machine.
- Do not force small machines to do large jobs which require more powerful machines.
- Do not force a tool or auxiliary equipment to carry out work for which it is not designed; e.g. do not
use a circular saw to cut down branches or timber.
8. Wear suitable clothing.
- Do not wear any loose clothing or jewellery as they can get caught in rotating parts.
- When working outdoors, non-slip shoes are recommended.
- Wear a hairnet (or similar) if you have long hair.
9. Always wear safety goggles.
Use a protective mask if the work creates a lot of dust.
10. Use dust collecting equipment.
If it is possible to attach a dust collector to the machine, ensure that it is tted and used properly.
11. Do not manhandle the power cable.
Instead of tugging at the cable, disconnect it by pulling the plug out of the socket. Ensure that the power
cable does not come into contact with heat, oil or sharp edges.
12. Ensure that the workpiece is securely fastened.
When possible, use clamps or a vice to secure the workpiece. That is safer than holding the workpiece
with one hand.
13. Do not overreach.
Ensure that you stand safely and with good balance at all times.
14. Keep the machine in good working order.
Ensure that they are clean and that the cutting edges are sharp for an optimal and safe result. Follow
the recommendations in the manual regarding lubrication and change of ttings. Check the power cable
regularly. If it is damaged it should be changed by a qualied service technician. Check all extension
cables regularly to ensure that they are not damaged. Ensure that the handles and controls of the
machinery/tools are dry, clean and completely free from oil, grease etc.
Specyfikacje produktu
| Marka: | Cotech |
| Kategoria: | młynek |
| Model: | 30-7901 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Cotech 30-7901, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje młynek Cotech
2 Września 2024
1 Września 2024
1 Września 2024
Instrukcje młynek
- młynek Worx
- młynek Milwaukee
- młynek Parkside
- młynek Stanley
- młynek Black & Decker
- młynek DeWalt
- młynek Makita
- młynek RYOBI
- młynek Flex
- młynek DEDRA
- młynek Hilti
- młynek Trotec
- młynek Handwerk
- młynek Güde
- młynek Bavaria
- młynek Alpha Tools
- młynek HiKOKI
- młynek Proviel
- młynek Metabo
- młynek Skil
- młynek Pansam
- młynek Kress
Najnowsze instrukcje dla młynek
22 Października 2024
1 Października 2024
28 Września 2024
21 Września 2024
21 Września 2024
17 Września 2024
4 Września 2024
23 Sierpnia 2024
23 Sierpnia 2024
23 Sierpnia 2024