Instrukcja obsługi DeWalt DW866

DeWalt Maszyna do piłowania DW866

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DeWalt DW866 (27 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/27
DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 Printed in U.S.A. (JUN98-CD-1) Form No. 384621-01
DW866 Copyright © 1998
384621-01/DW866 1/8/02 2:27 PM Page 2
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTESADVERTENCIA:
DE USAR EL PRODUCTO.
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DW866
12” (105mm) Cut-off Machine
Machine à tronçonner de 105 mm (12 po)
Máquina cortadora de 105 mm (12”)Máquina cortadora de 105 mm (12”)
384621-01/DW866 1/8/02 2:27 PM Page 3
ELECTRICAL SAFETY
• Grounded tools must be plugged into an outlet properly
installed and grounded in accordance with all codes and
ordinances. Never remove the grounding prong or modify the
plug in any way. Do not use any adapter plugs. Check with a
qualified electrician if you are in doubt as to whether the outlet
is properly grounded. If the tools should electrically malfunction or
break down, grounding provides a low resistance path to carry
electricity away from the user.
•Double insulated tools are equipped with a polarized plug (one
blade is wider than the other.) This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug
in any way. Double insulation eliminates the need for the three
wire grounded power cord and grounded power supply system.
•Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is grounded.
•Don’t expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
•Do not abuse the cord. Never use the cord to carry the tools or
pull the plug from an outlet. Keep cord away from heat, oil,
sharp edges or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of electric shock.
•When operating a power tool outside, use an outdoor
extension cord marked “W-A” or “W.” These cords are rated for
outdoor use and reduce the risk of electric shock. When using an
extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will cause a drop
in line voltage resulting in loss of power and overheating. The
following table shows the correct size to use depending on cord
length and nameplate ampere rating. If in doubt, use the next
heavier gage. The smaller the gage number, the heavier the cord.
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY DEWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
General Safety Rules
WARNING! Read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WARNING: Improper connection of the equipment grounding
conductor can result in the risk of electric shock. Check with a
qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug
provided with the appliance. If it will not fit the outlet, a proper outlet
must be installed by a qualified electrician.
We recommend that you never disassemble the tool or try to do any
rewiring in the electrical system. Any repairs should be performed
only by authorized service centers. Should you be determined to
make a repair yourself, remember that the green colored wire is the
grounding wire. Never connect this green wire to a live terminal. If
you replace the plug on the power cord, be sure to connect the green
wire only to the grounding (longest) prong on a three-prong plug.
Never remove the grounding prong.
WORK AREA
•Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
•Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or fumes.
•Keep bystanders, children, and visitors away while operating a
power tool. Distractions can cause you to lose control.
384621-01/DW866 1/8/02 2:27 PM Page 4

Specyfikacje produktu

Marka: DeWalt
Kategoria: Maszyna do piłowania
Model: DW866

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DeWalt DW866, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania DeWalt

DeWalt

DeWalt DCCS621 Instrukcja

3 Stycznia 2025
DeWalt

DeWalt DCPS671 Instrukcja

3 Stycznia 2025
DeWalt

DeWalt DCS590 Instrukcja

3 Stycznia 2025
DeWalt

DeWalt DW861 Instrukcja

9 Października 2024
DeWalt

DeWalt DCS397 Instrukcja

7 Października 2024
DeWalt

DeWalt DWE249 Instrukcja

7 Października 2024
DeWalt

DeWalt DWM120 Instrukcja

2 Października 2024
DeWalt

DeWalt DW309K Instrukcja

30 Września 2024
DeWalt

DeWalt DW317 Instrukcja

30 Września 2024
DeWalt

DeWalt DW100 Instrukcja

23 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Husqvarna

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025
Güde

Güde GSS 400 Instrukcja

12 Stycznia 2025
Makita

Makita DUC306PG2 Instrukcja

12 Stycznia 2025
HiKOKI

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025
DEDRA

DEDRA DED7060 Instrukcja

11 Stycznia 2025
Einhell

Einhell KGS 190 Instrukcja

11 Stycznia 2025
Sun Joe

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025
Einhell

Einhell BT-MB 550 U Instrukcja

11 Stycznia 2025
Maruyama

Maruyama MCV51 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc JS505DC Instrukcja

9 Stycznia 2025