Instrukcja obsługi DeWalt DW744SB

DeWalt Maszyna do piłowania DW744SB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DeWalt DW744SB (35 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/35

INSTRUCTION MANUAL

GUIDE D'UTILISATION

MANUAL DE INSTRUCCIONES

DW744

Table Saw

Scies circulaires à table

Sierra de banco

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE

GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE

USAR EL PRODUCTO. SI TIENE DUDAS, POR FAVOR LLAME.

Before returning this product

call

1-800-4-DEWALT

IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR DEWALT PURCHASE,

CALL 1-800-4 DEWALT.

IN MOST CASES, A DEWALT REPRESENTIVE CAN RESOLVE YOUR

PROBLEM OVER THE PHONE.

IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.

YOUR FEEDBACK IS VITAL TO THE SUCCESS OF DEWALT'S

QUALITY IMPROVEMENT PROGRAM.

See our catalog on the World Wide Web at www.dewalt.com

English

WALT… BUILT JOBSITE TOUGH

DEWALT high performance industrial tools are made for America’s tough-

est industrial and construction applications. The design of every tool in the

line – from drills to sanders to grinders – is the result of rigorous use on

jobsites and throughout industry. Each tool is produced with painstaking

precision using advanced manufacturing systems and intense quality

control. Every tool is checked before it leaves the factory to make sure

that it meets your standards for durability, reliability and power.

DEWALT Built Jobsite Tough…WE GUARANTEE IT.

WARNING: FOR YOUR OWN SAFETY, READ INSTRUCTION MANUAL BEFORE OPERATING SAW • ALWAYS WEAR EYE PROTECTION • DO NOT WEAR

GLOVES, NECKTIES, JEWELRY OR LOOSE CLOTHING • CONTAIN LONG HAIR • KEEP HANDS AND FINGERS OUT OF THE SAW BLADE PATH — USE EXTRA

CAUTION WHEN BEVELING • ALWAYS USE BLADE GUARD AND SPREADER FOR EVERY OPERATION FOR WHICH IT CAN BE USED, INCLUDING THROUGH

SAWING • USE A “PUSH STICK” WHEN REQUIRED • KNOW HOW TO AVOID KICKBACKS — SEE MANUAL • ALWAYS SUPPORT WORK WITH TABLE AND

FENCE OR MITER GAUGE • NEVER USE FENCE AND MITER GAUGE TOGETHER • NEVER REACH AROUND OR OVER SAW BLADE • SECURELY MOUNT

SAW BLADE BEFORE OPERATING • NEVER REMOVE JAMMED OR CUT-OFF PIECES UNTIL POWER IS OFF AND BLADE HAS STOPPED • DO NOT EXPOSE

TO RAIN OR USE IN DAMP LOCATIONS • SECURE TOOL PROPERLY TO PREVENT UNEXPECTED MOVEMENT • DO NOT OPERATE THIS MACHINE WHILE

UNDER THE INFLUENCE OF ALCOHOL OR DRUGS • FAILURE TO COMPLY WITH THESE WARNINGS MAY RESULT IN SERIOUS PERSONAL INJURY.

WARNING: For your own safety read instruction manual before operating table saw.

WARNING: When using electric tools, basic safety precautions should always be followed

to reduce risk of fire, electric shock, and personal injury, including the following:

Double Insulation

Double insulated tools are constructed throughout with two separate layers of electrical insu-

lation or one double thickness of insulation between you and the tool’s electrical system.

Tools built with this insulation system are not intended to be grounded. As a result, your tool

is equipped with a two prong plug which permits you to use extension cords without concern

for maintaining a ground connection.

NOTE: Double insulation does not take the place of normal safety precautions when operat-

ing this tool. The insulation system is for added protection against injury resulting from a pos-

sible electrical insulation failure within the tool.

CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS. Repair

or replace damaged cords.

Polarized Plugs

To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider

than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully

into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the

proper outlet. Do not change the plug in any way.

Important Safety Instructions

• KEEP GUARDS IN PLACE and in working order.

• REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys

and adjusting wrenches are removed from tool before turning it on.

• KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.

• DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power tools in damp or wet

locations, or expose them to rain. Keep work area well lighted.

• KEEP CHILDREN AWAY. All visitors should be kept safe distance from work area.

• MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing starter

keys.

• DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

• USE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not designed.

• USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one heavy enough to carry the current your

product will draw. An undersized cord will cause a drop in line voltage resulting in loss of

power and overheating. The following table shows the correct size to use depending on cord

length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the

gage number, the heavier the cord.

Minimum Gage for Cord Sets

Volts Total Length of Cord in Feet

120V 0-25 26-50 51-100 101-150

240V 0-50 51-100 101-200 201-300

Ampere Rating

More Not more AWG

Than Than

0 - 6 18 16 16 14

6 - 10 18 16 14 12

10 - 12 16 16 14 12

12 - 16 14 12 Not Recommended

• WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets,

or other jewelry which may get caught in moving parts. Nonslip footwear is recommended.

Wear protective hair covering to contain long hair. Air vents often cover moving parts and

should also be avoided.

• ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty.

Everyday eyeglasses only have impact resistant lenses, they are not safety glasses.

• SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using

your hand and it frees both hands to operate tool.

• DON’T OVERREACH. Keep proper footing and balance at all times.

• MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest

performance. Follow instructions for lubricating and changing accessories.

• DISCONNECT TOOLS before servicing; when changing accessories, such as blades, bits,

cutters, and the like.

• REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off position

before plugging in.

• USE RECOMMENDED ACCESSORIES. Consult the instruction manual for recommended

accessories. The use of improper accessories may cause risk of injury to persons.

• NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool

is unintentionally contacted.

• CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is

damaged should be carefully checked to determine that it will operate properly and perform

its intended function–check for alignment of moving parts, binding of moving parts, breakage

of parts, mounting, and any other conditions that may affect its operation. A guard or other

part that is damaged should be properly repaired or replaced.

• DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of

the blade or cutter only.

• NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool

until it comes to a complete stop.

• REPLACEMENT PARTS. When servicing, use only identical replacement parts.

Additional Safety Rules for Table Saw

WARNING: For your own safety, do not operate your saw until it is completely assembled

and installed according to the instructions and until you have read and understood the following:

• All Safety Rules • Adjustment Procedures

• Assembly Procedures • Basic Operations

• Operating Controls

•KEEP GUARDS in place and in working order.

•STABILITY. Make sure table saw is firmly mounted before use.

•MINIMIZE ACCIDENT POTENTIAL. Most accidents are caused by failure to follow setup

and operating instructions.

•AVOID awkward hand positions, where a sudden slip could cause a hand to move into a

saw blade or other cutting tool. Never reach in back of, or around, the cutting tool with

either hand to hold down the workpiece. DO NOT PLACE FINGERS OR HANDS IN THE

PATH OF THE SAW BLADE.

•NEVER reach under your machine when operating or make any adjustments when it is

running.

•SHUT OFF the saw and disconnect the power cord when removing the table insert, chang-

ing the cutting tool, removing or replacing the blade guard, or making adjustments.

•ALWAYS maintain control of the workpiece. DO NOT let go of the workpiece until it is well

clear of the cutting tool.

•WHEN REMOVING short workpieces, or cleaning up around the table, be sure the saw is

in the OFF position and blade has stopped turning.

•NEVER turn the saw ON before clearing the table of all tools, wood scraps, etc., except

the workpiece and related feed or support devices for the operation planned.

•WHEN changing saw location, disconnect power.

•USE extra caution when the guard assembly is removed for resawing, dadoing, rabbeting,

or molding. Replace the guard as soon as that operation is completed.

English

Specyfikacje produktu

Marka:	DeWalt
Kategoria:	Maszyna do piłowania
Model:	DW744SB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DeWalt DW744SB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania DeWalt

DeWalt DCCS621 Instrukcja

3 Stycznia 2025

DeWalt DCPS671 Instrukcja

3 Stycznia 2025

DeWalt DCS590 Instrukcja

3 Stycznia 2025

DeWalt DW861 Instrukcja

9 Października 2024

DeWalt DCS397 Instrukcja

7 Października 2024

DeWalt DWE249 Instrukcja

7 Października 2024

DeWalt DWM120 Instrukcja

2 Października 2024

DeWalt DW309K Instrukcja

30 Września 2024

DeWalt DW317 Instrukcja

30 Września 2024

DeWalt DW100 Instrukcja

23 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025

Güde GSS 400 Instrukcja

12 Stycznia 2025

Makita DUC306PG2 Instrukcja

12 Stycznia 2025

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025

DEDRA DED7060 Instrukcja

11 Stycznia 2025

Einhell KGS 190 Instrukcja

11 Stycznia 2025

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025

Einhell BT-MB 550 U Instrukcja

11 Stycznia 2025

Maruyama MCV51 Instrukcja

11 Stycznia 2025

Vonroc JS505DC Instrukcja

9 Stycznia 2025